Waste & Recycling Applications in Canada

  • Premium

    Machineries for product destruction & recovery

    Complete Turnkey Systems, custom designed and manufactured by Shred-Tech®, destroy, recover and separate a wide variety of off-spec, mis-packaged and out-dated products. Shred-Tech®’s Material Separation and Recovery / Destruction Systems are used around the world for recovering precious metals from computers and telecommunications scrap, nylon from carpet, and recyclables from MSW, just to name a few. Mis-packaged consumer products such as breakfast cereals, cosmetics, milk and juice containers, ...

    By Shred-Tech Corp. based in Cambridge, ONTARIO (CANADA).

  • Premium

    Machineries for e-waste shredding & recycling

    Governments and manufacturers of electronic hardware are increasingly coming under pressure regarding the safe disposal of electronic waste once their useful life has been completed. End-of-life (EOL) legislation for e-scrap is in place in many countries and pending throughout Europe and North America. Shred-Tech® has engineered and manufactured custom systems to shred, separate and recover the component materials that make up these electronic ...

    By Shred-Tech Corp. based in Cambridge, ONTARIO (CANADA).

  • Premium

    Machineries for beverage container recycling

    Every beverage bottling facility requires a cost efficient, clean method for the disposition of out of date or out of spec products. Shred-Tech® has been providing solutions to suit this need for many years. All shapes and sizes of cans, plastic bottles and aseptic packaging have been processed using our ...

    By Shred-Tech Corp. based in Cambridge, ONTARIO (CANADA).

  • Premium

    Water treatment solutiions for power industry

    Fluence has decades of experience providing sustainable treatment solutions for power industry process water and effluent. Industrialization and population growth are spurring the demand for power around the world, putting pressure on fuel and water resources. At the same time, power producers face strict pollution and air-quality ...

    By Fluence Corporation Office in Bogotá, BRITISH COLUMBIA (CANADA).

  • Premium

    Hand-Held & process control water testing instrument for Circuit board cleanliness testing industry

    Contamination of circuit boards can bring about severe degradation of insulation resistance and dielectric strength. Cleanliness of completed circuit boards is, therefore, of vital interest. For those companies who have established circuit board cleaning procedures, the MIL Spec P-28809 has been used as a guideline for control. Now a simple 'on line' test for the relative measurement of ionic contamination has been developed. This fast and economical method for testing circuit board cleanliness uses a Myron L ...

    By Myron L Company Distributor in Burnaby, BRITISH COLUMBIA (CANADA).

  • Premium

    Hand-Held & process control water testing instrument for Deionized water testing industry

    Years ago, high purity water was used only in limited applications. Today, deionized (Dl) water has become an essential ingredient in hundreds of applications including: medical, laboratory, pharmaceutical, cosmetics, electronics manufacturing, food processing, plating, countless industrial processes, and even the final rinse at the local car ...

    By Myron L Company Distributor in Burnaby, BRITISH COLUMBIA (CANADA).

  • Premium

    Technologies for Wastewater Treatment in Dairy Industry

    Dairy industry faces the challenge of the disposal of many by-products from the production process, such as Whey, Hot Whey, Buttermilk and cheese processing wastewater. Our cost-effective solutions allow taking advantage of all the by-products, which either are a cost or have low value, thanks to the generation of biogas. The most common treatments are either Anaerobic treatment only with a medium-low biological plant, or a Dissolved Air Flotation followed by a high load biological plant. The benefits are the ...

    By Fluence Corporation Office in Bogotá, BRITISH COLUMBIA (CANADA).

  • Premium

    Machineries for metals shredding & recycling

    Shred-Tech®’s high torque Industrial Shredders can found in many of the world’s largest primary and secondary metal recycling and processing facilities. Shred-Tech®’s applications range from high volume magnesium sprue & runner reduction at over 60 TPH to one of the toughest applications known, the reduction of titanium plate and sheet stock. These slow speed shear shredders reduce shred materials such as baled aluminum, bailed radiators, ACSR cable, industrial, military and consumer ...

    By Shred-Tech Corp. based in Cambridge, ONTARIO (CANADA).

  • Premium

    Decentralized Wastewater Treatment for Worker Encampments

    With Aspiral™ Smart Packaged plants, installations can meet even the strictest effluent regulations and foster good relations with neighboring communities The oil and natural gas extraction industry is booming, and where there's a boom, there's a workforce that needs shelter. Typically, impromptu housing springs up to meet the need, but often, these so-called "man camps" overstress the sanitary infrastructure of nearby towns or go without wastewater treatment entirely, endangering human health and the environment. ...

    By Fluence Corporation Office in Bogotá, BRITISH COLUMBIA (CANADA).

  • Premium

    Machineries for cardboard recycling

    The need for of shredding cardboard is as diverse as the product. There is cardstock, fine flute and single and multi-wall corrugated of all shapes and sizes. Shred-Tech® has provided cardboard systems for destruction of out of spec packaging, increasing of bulk density for reduced disposal costs and conditioning for further processing into a product such as building insulation. Various methods of material handling have been utilized such as conveyors and air-vey ...

    By Shred-Tech Corp. based in Cambridge, ONTARIO (CANADA).

  • Premium

    Gas Detection and Analysis Equipment for Energy Generation Industry

    Recent decades brought a rapid growth in the global demand for energy. This trend is accurate for both developed as well as developing countries. Electrical power is a key source of energy for the vast majority of the world population. Although the usage of renewable energy is on the rise, the majority of electric power production worldwide is still based on conventional methods utilizing coal, oil and gas as its fuel to power the ...

    By EyeCGas -OGI by OPGAL Distributor in London, ONTARIO (CANADA).

  • Premium

    Shredding machineries for hard drive shredding

    Hard Drive Destruction is one of the fastest growing segments in the Information Destruction Industry. The ST-5 Portable Plug-In Hard Drive Shredder and our ST-5 Stationary Hard Drive Shredder Systems can destroy a hard drive in just 5 seconds. Both shredding systems are also electronically interlocked for safe and easy ...

    By Shred-Tech Corp. based in Cambridge, ONTARIO (CANADA).

  • Premium

    Machineries for paper shredding

    Shred-Tech® designs and manufactures plant based paper-shredding systems capable of shred rates up to 15 tons per hour. High torque shear shredding technology ensures a high security particle size for confidential document destruction. Shred-Tech®’s paper shredding systems are rugged, reliable, highly efficient and backed by Shred-Tech®’s world famous service and ...

    By Shred-Tech Corp. based in Cambridge, ONTARIO (CANADA).

  • Premium

    Shredding machineries for waste processing

    Each system is designed to meet regulatory safety, and material handling requirements. Shred-Tech® engineers are experienced at designing turnkey solutions to each unique waste handling and processing ...

    By Shred-Tech Corp. based in Cambridge, ONTARIO (CANADA).

  • Premium

    Machineries for medical waste processing

    Shred-Tech®’s Industrial Medical Waste Shredders have been installed in many hospitals and high volume commercial processing plants throughout the world. Slow speed, high torque shredders easily reduce the toughest medical grade materials ranging from fabrics to glass, plastics and stainless steel instruments and more. These machines reduce bulky autoclaved waste destined for landfill by as much as 70%, rendering all materials to a non-reusable and unrecognizable state. Applications include dedicated ...

    By Shred-Tech Corp. based in Cambridge, ONTARIO (CANADA).

  • Premium

    Gas Detection and Analysis Equipment for Oil and Gas Industry

    The Oil & Gas segment is the biggest market for gas detection and analysis equipment. It is common to describe this industry based on the product flow, from “Upstream” exploration and extraction location toward a “Downstream” flow, which end up at the end user home or business. Throughout the Oil and Gas industry, leaks are a real ...

    By EyeCGas -OGI by OPGAL Distributor in London, ONTARIO (CANADA).

  • Premium

    Machineries for construction and demolition

    Shred-Tech® has the perfect tool for shredding all types of construction and demolition waste: the HAAS TYRON 2000XL. This double shaft, primary, slow speed shredder is the newest and most powerful shredder in its class. With key features such as completely programmable shaft speeds, direction and reversing time, this high performance machine will shred even the most difficult of ...

    By Shred-Tech Corp. based in Cambridge, ONTARIO (CANADA).

  • Premium

    Technologies for Wastewater Treatment in Breweries

    The "ideal" treatment of waste from beer (and not only) must respect the legal limits, produce the minimum possible quantity of sludge and recover the maximum possible amount of energy. Fluence offers an anaerobic solution on wastewater and sludge + aerobic wastewater treatment. The anaerobic solution uses a "Rapid" granular sludge digester. It is a digester in which a particular type of sludge capable of "granulating" grows and it is used for very low COD (> 2000 ֺmg / l) as long as the waste contains sugars or ...

    By Fluence Corporation Office in Bogotá, BRITISH COLUMBIA (CANADA).

  • Premium

    Water Testing for Textile Manufacturing

    The textile manufacturing industry encompasses many and diverse processes that rely heavily on the use of water, energy, chemicals, and other resources. Wet spinning, sizing, desizing, scouring, bleaching, mercerization, dyeing and printing are just a few. Monitoring and controlling the pH, TDS/Conductivity/Salt Concentration, ORP (REDOX), and Temperature of the aqueous solutions used in these processes conserves costly resources, controls quality, and reduces the amount of pollution that must be treated before ...

    By Myron L Company Distributor in Burnaby, BRITISH COLUMBIA (CANADA).

  • Premium

    Water Testing for Automatic Rinse Tank Controls

    Proper rinsing is one of the most important steps in quality manufacturing or metal finishing. Plenty of low cost, good quality water for rinsing has been available in the past, so rinse water conservation has been largely ignored. Today, this is no longer true. Tap water costs have increased dramatically. Various new regulations are now in effect which limit the allowable volume of wastewater. Others require wastewater treatment. Still other laws tax the amount of water going down the sewer. These factors have ...

    By Myron L Company Distributor in Burnaby, BRITISH COLUMBIA (CANADA).

Need help finding the right suppliers? Try XPRT Sourcing. Let the XPRTs do the work for you