Waste & Recycling Applications in Latin America

  • Premium

    Circuit Board Cleanliness Testing

    Contamination of circuit boards can bring about severe degradation of insulation resistance and dielectric strength. Cleanliness of completed circuit boards is, therefore, of vital interest. For those companies who have established circuit board cleaning procedures, the MIL Spec P-28809 has been used as a guideline for control. Now a simple `on line` test for the relative measurement of ionic contamination has been developed. This fast and economical method for testing circuit board cleanliness uses a Myron L...

    By Myron L Company Distributor in BELIZE.

  • Premium

    Odor control for pulp and paper

    Pulp and paper production with none of the odor. Pulp and paper manufacturing is a notorious source of nuisance odors, often stemming from hydrogen sulfide, mercaptans and sulfur dioxide. Fortunately, Ecosorb products offer a natural and effective solution to neutralize these odors and all others associated with the paper and pulp industry. Ecosorb odor eliminators have been used repeatedly by large paper and pulp manufacturers to control odors around on-site black liquor lagoons, primary clarification ponds and...

    By OMI Industries (OMI) Distributor in Parcela, COLOMBIA.

  • Premium

    Environmental solutions for the cement manufacturing industry

    Evaporative gas cooling and conditioning systems use specially engineered atomizing nozzles that introduce a controlled amount of finely atomized water into the hot gas stream to reduce and/or maintain gas temperature. The water evaporates completely while absorbing heat from the gases, which results in free-flowing dust, zero liquid discharge, and minimal or no problems with scale buildup on the walls.

    By Dürr MEGTEC, LLC Office in São Paulo, BRAZIL.

  • Premium

    Environmental solutions for the waste incineration industry

    Multi-pollutant abatement systems. Different Categories of Waste Incineration: From a regulatory standpoint, the industry is divided into a number of categories: commercial/industrial solid waste incinerators (CISWI), municipal waste combustors (MWC), hospital/medical/infectious waste incinerators (HMIWI), hazardous waste combustors (HWC), sewage sludge incinerators (SSI), and other solid waste incinerators (OSWI). While each sub-category is subject to differing environmental regulations, all can benefit from...

    By Dürr MEGTEC, LLC Office in São Paulo, BRAZIL.

  • Premium

    Water treatment solutiions for power industry

    Fluence has decades of experience providing sustainable treatment solutions for power industry process water and effluent. Industrialization and population growth are spurring the demand for power around the world, putting pressure on fuel and water resources. At the same time, power producers face strict pollution and air-quality controls.

    By Fluence Corporation Office in Buenos Aires, ARGENTINA.

  • Premium

    Environmental solutions for the drying and curing sector

    In the industrial sector, drying and curing technologies from Dürr MEGTEC have been deployed in roll-to-roll processing applications for advanced battery materials, coatings of various types, composites, solar films, membranes, flexible packaging, coil coating, converting, printing, electronics, nonwovens, and other industries. Our patented flotation air bar systems transport webs contact-free without web shift, which helps ensure product quality. Capable of handling webs at a wide range of speeds and...

    By Dürr MEGTEC, LLC Office in São Paulo, BRAZIL.

  • Premium

    Environmental solutions for the chemical processing industry

    Applying the right emission control equipment for the chemical and pharmaceutical industry requires a thorough knowledge and understanding of the process and system requirements, combined with the ability to provide custom solutions.

    By Dürr MEGTEC, LLC Office in São Paulo, BRAZIL.

  • Premium

    Environmental solutions for the automotive - industrial painting and other finishing applications

    Reliability and uptime are essential. Uninterrupted production - all are essential requirements in painting and finishing applications. Just-in-time manufacturing demands uninterrupted production and smooth pressure control that eliminates pressure fluctuations in the painting and finishing process. Dürr Megtec has supplied many systems to tier 1 and tier 2 automotive plants where high volume, low concentration exhaust streams are treated economically and effectively, yet adaptable to changing finishing...

    By Dürr MEGTEC, LLC Office in São Paulo, BRAZIL.

  • Premium

    Environmental solutions for the metals and mining industry

    Dürr Megtec provides custom-designed gas cleaning solutions for the metallurgical industry. Gas cleaning for acid plants, furnaces and converters: Wet electrostatic precipitators for collecting fine particulate and sulfuric acid mists from SO2-rich gas streams. Wet and dry electrostatic precipitators for reduction of particulate from furnace and converter gas streams. Acid gas control with wet absorbers.

    By Dürr MEGTEC, LLC Office in São Paulo, BRAZIL.

  • Premium

    Environmental solutions for the refining and petrochemical industry

    Refining and Petrochemical Safety, Reliability and Environmental Sustainability.

    By Dürr MEGTEC, LLC Office in São Paulo, BRAZIL.

  • Premium

    Chromatography laboratory instrumentation for food & beverage industry

    Effective measures against food fraud, efficient and healthy food processing and the development of functional food and neutraceuticals are just few of many challenges in modern Food and Beverage production and analysis. BUCHI offers classical reference methods and near infrared spectroscopy for food analysis, but also visualization of production processes using spray drying and encapsulation.

    By BÜCHI Labortechnik AG Office in Valinhos, BRAZIL.

  • Premium

    Water & wastewater treatment solutions for food & beverage industry solutions

    Our best-in-class solutions serve the needs of a wide range of food and beverage manufacturers across the globe. Fluence has more than 30 years of experience in delivering water, wastewater, and waste-to-energy projects to the food and beverage industry across the globe. Our unique technologies provide best-in-class treatment for incoming ingredient water, reduce operating costs by turning waste into a resource, and help our customers enhance their products.

    By Fluence Corporation Office in Buenos Aires, ARGENTINA.

  • Premium

    Water & wastewater treatment solutions for oil & gas upstream industry

    Sustainable Technologies for Treating Produced Water for Reuse or Deep Well Injection. Oil and gas exploration and production are highly complex and capital-intensive processes. Producers face many challenges, including the constraints of climate, environment, and geography. As companies extract oil and gas in areas that at one time were considered unpromising, water plays an ever more essential role.

    By Fluence Corporation Office in Buenos Aires, ARGENTINA.

  • Premium

    Water Testing for Automatic Rinse Tank Controls

    Proper rinsing is one of the most important steps in quality manufacturing or metal finishing. Plenty of low cost, good quality water for rinsing has been available in the past, so rinse water conservation has been largely ignored. Today, this is no longer true. Tap water costs have increased dramatically. Various new regulations are now in effect which limit the allowable volume of wastewater. Others require wastewater treatment. Still other laws tax the amount of water going down the sewer. These factors have...

    By Myron L Company Distributor in BELIZE.

  • Premium

    Environmental solutions for the printing and packaging industry

    Dürr Megtec has pioneered innovative equipment solutions for the print industry, including extensive experience in delivering digital printing markets where we deliver digital press manufacturers a proven product approach for web handling and drying. Our capabilities span the entire digital press line, enabling complete integration possibilities.

    By Dürr MEGTEC, LLC Office in São Paulo, BRAZIL.

  • Premium

    Odors control for solid waste

    A solid solution for solid waste odors. All areas of solid waste handling are, by nature, odorous affairs. Municipal sludge, municipal solid waste, landfills, composting and co-composting facilities all generate odors that can be offensive to workers and the community at large. The process is a complex one, with multiple drops, collections, transfers and sortings of recyclable and non-recyclable material. Combustible materials are then incinerated for energy production.

    By OMI Industries (OMI) Distributor in Parcela, COLOMBIA.

  • Premium

    Water Testing for Textile Manufacturing

    The textile manufacturing industry encompasses many and diverse processes that rely heavily on the use of water, energy, chemicals, and other resources. Wet spinning, sizing, desizing, scouring, bleaching, mercerization, dyeing and printing are just a few. Monitoring and controlling the pH, TDS/Conductivity/Salt Concentration, ORP (REDOX), and Temperature of the aqueous solutions used in these processes conserves costly resources, controls quality, and reduces the amount of pollution that must be treated before...

    By Myron L Company Distributor in BELIZE.

  • Premium

    Analytical instruments for oil and gas

    To ensure product quality and process optimization, the determination of elemental impurities is crucial for control labs in refineries and in the production of alternative fuels. Analytik Jena`s versatile solutions help you comply with international regulations and improve analysis of petroleum products, natural gas and alternative fuels.

    By Analytik Jena AG Distributor in Ciudad Autonoma de Buenos Aire, ARGENTINA.

  • Premium

    Environmental solutions for the composites & carbon fiber industry

    Custom or hybrid styles and designs to fit your needs. Dürr Megtec provides roll-to-roll drying, curing and thermal air handling systems for coating and laminating applications. Whether you need a small, value-priced roll support dryer, a custom-configured air flotation dryer or a complete coating line for a specialized application, Dürr Megtec has the products and services to meet your requirements. Our technical application and design engineers work with your process specialists or OEM suppliers to...

    By Dürr MEGTEC, LLC Office in São Paulo, BRAZIL.

  • Premium

    Environmental solutions for the flue gas temperature control

    Evaporative gas cooling and conditioning systems help protect your downstream equipment, enhance air pollution control performance, reduce gas volumes, and increase production capacity. Central to our systems are Turbotak atomizing nozzles, which introduce a controlled amount of finely atomized water into the hot gas stream to reduce and/or maintain gas temperature. The water evaporates, while absorbing heat from the gases, for free-flowing dust, zero liquid discharge, and minimal or no wall buildup.

    By Dürr MEGTEC, LLC Office in São Paulo, BRAZIL.

Need help finding the right suppliers? Try XPRT Sourcing. Let the XPRTs do the work for you