Only show results available in Virginia? Ok

Autoclave Bag (Autoclaves) equipment

  • Autoclave Bags

    Like our Autoclave Cart Liners, our high strength polypropylene autoclave bags are manufactured for steam sterilization of infectious and biohazard waste. They are designed to withstand the high temperatures achieved during sterilization and are strong, pliable, leak and puncture-resistant. The temperature indicator strip is easily identified and ...

    By Pacific Medical Specialties, LLC based in Rancho Cucamonga, CALIFORNIA (USA).

  • Carrying & Storage Racks

    Carrying & Storage Racks are specially designed to hold Whirl-Pak® bags. Made in the U.S.A. of 10 and 12 gauge steel fused together to create strong joints and straight lined. Racks are finished with an electrostatically applied powder coating. The result is a strong, durable finish which will stand up to many laboratory materials and ...

    By Qorpak based in Bridgeville, PENNSYLVANIA (USA). from Bags Product line

  • ChargeBag - Model RTS - Autoclavable Component Transfer Bags

    The sterile transfer of Ready To Sterilise (RTS) closures and components from sterilisation to aseptic filling is assured with the autoclavable ChargeBag RTS. Enhanced sterility assurance Suitable for steam, EtO or gamma sterilisaiton Ultra clean ISO Class 5 manufacure Durable Tyvek and HDPE film construciton.

    By ChargePoint Technology Ltd based in Liverpool, UNITED KINGDOM.

  • Lab Autoclaves

    A laboratory autoclave is a device used to sterilize equipment and supplies by subjecting them to high pressure saturated steam at 121 C for around 20 minutes depending on the size of the load and the contents. Lab autoclaves are widely used in microbiology with typical loads of laboratory glassware to ensure that the experiment is initiated free ...

    By Spectrum Chemicals and Laboratory Products based in New Brunswick,, NEW JERSEY (USA). from Laboratory Appliances Product line

  • Autoclave Cart Liners

    Like our Autoclave Bags, our high strength polypropylene Autoclave Cart Liners are manufactured for steam sterilization of infectious and biohazard waste. They are designed to withstand the high temperatures achieved during sterilization and are strong, pliable, leak and puncture-resistant. The temperature indicator strip on the printed ...

    By Pacific Medical Specialties, LLC based in Rancho Cucamonga, CALIFORNIA (USA).

  • Vacuum/High Pressure Autoclave Systems

    BONDTECH has supplied high vacuum/high pressure autoclave systems to the waste treatment industry for almost 30 years. Our systems are designed to treat biomedical, Aphis, USDA, flight kitchens, airport, pharmaceutical, laboratory and any other infectious wastes that requires treatment or sterilization. BONDTECH has made a total ...

    By Bondtech Corporation based in Somerset, KENTUCKY (USA).

  • VERTISA - Medical Waste Post-Shredding

    Medical waste collected in bins or plastic bags are in transferred into stainless steel autoclave carts. The carts are pushed into the autoclave, where a pre-vacuum process ensures that all the air is removed from the wast

    By VERTISA Medical Waste Technology based in Orlando, FLORIDA (USA).

  • Auto-Clave - Model 240-3P - Sterilizer

    Hourly Capacity (autoclave bags):130 lbs. / Hour. Hourly Capacity (chamber liners):160 lbs. / Hour. Chamber Size:32” I.D. x 54” L.

    By San-I-Pak Pacific, Inc. based in Tracy, CALIFORNIA (USA). from Sterillizers Product line

  • Auto-Clave - Model 230-3P - Sterilizer

    Hourly Capacity (autoclave bags):87 lbs. / Hour. Hourly Capacity (chamber liners):106 lbs. / Hour. Chamber Size:32” I.D. x 42” L.

    By San-I-Pak Pacific, Inc. based in Tracy, CALIFORNIA (USA). from Sterillizers Product line

  • Auto-Clave - Model 340-3P - Sterilizer

    Hourly Capacity (autoclave bags):190 lbs. / Hour. Hourly Capacity (chamber liners):230 lbs. / Hour. Chamber Size:38” I.D. x 55” L.

    By San-I-Pak Pacific, Inc. based in Tracy, CALIFORNIA (USA). from Sterillizers Product line

  • Hospital Waste Cart Tipper

    Safety is always a major concern when dealing with hospital waste. The cart tipper with spill chute is designed to load red bag infectious waste from the hospital floor carts directly into the autoclave cart hands free. This significantly reduces the handling of the regulated waste.

    By George K. Moss Co., Inc. based in Birmingham, ALABAMA (USA). from Medical Waste Systems Product line

  • Model DLOAV Series - Air/Steam Mixture Sterilizers

    De Lama‘s range of steam autoclaves was born thanks to the experience and constant attention in the search for optimal solutions from the point of view of quality, functionality and reliability. Our steam autoclaves are used for treatment of infusion/ high-volume parenteral solutions, packed in sealed containers (e.g. bottles, glass bottles ...

    By Delama S.P.A. based in San Martino Siccomario, ITALY. from Sterilizers- Air/Steam Mixture Sterilizers Product line

  • Medical Waste Processing

    Shred-Tech’s Industrial Medical Waste Shredders have been installed in many hospitals and high volume commercial processing plants throughout the world. Slow speed, high torque shredders easily reduce the toughest medical grade materials ranging from fabrics to glass, plastics and stainless steel instruments and more. These machines reduce ...

    By Shred-Tech Corp. based in Cambridge, ONTARIO (CANADA). from Reduction & Recycling Product line

  • Bel-Art - Model F262190000 - Graduated Beaker 4000ML

    The Griffin low form polypropylene beakers have permanent, raised numeric graduations, which show the contained volume (±5%). 'No-Drip' spouts for easy pouring; Steam autoclavable at 121°C (250°F). Transparent, chemical resistant, stackable. Scienceware Graduated Pitchers are Ideal for Pouring Large Volumes. Capacity: 4000ml. Per ...

    By Bel-Art Products based in Wayne, NEW JERSEY (USA). from Beakers Product line

  • MS Centrifuge Tubes

    Product DescriptionCentrifuge Tubes are made of high-clarity polypropylene. Easy-to-read black graduations are accurate to 2% and in 1mL increments (15 mL) or 2.5mL increments (50mL) with a large white printed writing area. Smooth, flat surface polyethylene caps for conical bottom tubes and pulg seal caps for self-standing tubes are ...

    By Membrane Solutions LLC based in Dallas, OHIO (USA). from Lab Equipment Product line

  • Model OMW-1000 - Clean Waste Systems

    Clean Waste Systems OMW-1000 uses 'patened' technology utilizing ozone and special handling capabilities to treat and sterilize medical waste. While representing a breakthrough in sustainable technology, this solution makes business sense by providing almost immediate cost savings. The OMW-1000 is able to grind and treat regulated medical waste: ...

    By Clean Waste Systems, LLC based in Plymouth, MINNESOTA (USA).

Need help finding the right suppliers? Try XPRT Sourcing. Let the XPRTs do the work for you