Balers Articles

  • HSM vertical baling press provides order and cleanliness at the ROBINSON Club Daidalos on the island of Kos - Case Study

    The ROBINSON Club DAIDALOS on the Greek island of Kos is a magical location. Regardless of whether you are looking out from the balcony of a room or from the bar: the view of the Aegean Sea and the offshore islands puts hotel guests under a spell at any time of day. The hospitality of the staff and the unbelievably great sports and leisure activities make this club unique. Of course, guests know ...


    By HSM GmbH + Co. KG

  • ENERPAT Hot Model 200 Tons Automatic Metal Baler

    ENERPAT Hot Model 200 Tons Automatic Metal Baler ...


    By Enerpat Group UK Ltd

  • How are you recycling your waste oil drums and paint boxes?

    Does your company have waste 210 L oil drums? Or small paint boxes? How do you recycle these drums now? ...


    By Enerpat Group UK Ltd

  • Ile d’Molene - Case Study

    Ile d’Molene is a small Island outside the northwest coast of France, with approximately 200 habitants, that have solved their waste managment with the baling system from Flexus Balasystem. A truck collects the waste at the houses and discharge the waste directly into the baling plant where the waste is compressed and baled into sealed bales. The bales is stored and when the storage is ...


    By Flexus Balasystem AB

  • Baling of RDF/SRF - Case Study

    Refuse Derived Fuel (RDF) and Solid Recovered Fuel (SRF) plants are common in Europe to meet the European demands for sustainable waste handling. RDF/SRF process facilities combined with the Flexus Balasystem round baling system is the best solution to efficiently store and transport the generated RDF/SRF. The material is compressed and wrapped into easily handled round bales, that can be stored ...


    By Flexus Balasystem AB

  • Hessheim - Case Study

    Waste from approximately 800,000 people is treated at the WtE (Waste to Energy) incineration plant in Ludwigshafen and during the revisions of the plant the waste is stored at Süd-müll in Heßheim that uses the Flexus round baling machine for secure storage. The baling gives high quality storage of waste fuel and the bales are then treated at the WtE plant when there ...


    By Flexus Balasystem AB

  • Incinerator Plant, Lidköping - Case Study

    SWEDEN: Baling of MSW In Lidköping the incineration plant is connected to the central heating systems of the city. However, incineration plants has a high demand for fuel in the winter season and limited demand in the summertime. Inflow of material, however, comes evenly all year around and this gives a need to store waste during the summer. The solution to this is the ...


    By Flexus Balasystem AB

  • NIMES - Case Study

    France: Baling of MSW The incineration plant of Nimes, France has a capacity of 110,000 tonnes/year in one line. The choice of a single line of 14 tonnes/hour instead of two lines (2 x 7 tonnes/hour), significantly reduces the amount of investment, this was made possible by the installation of the Flexus baling system that ensures the ability to receive waste even when the ...


    By Flexus Balasystem AB

  • Kiverco Completes Another Complex Project for a Major UK Customer

    The customer Tom White Waste Ltd was formed in 1981, when Tom White found it difficult to obtain waste management services for his other businesses and decided to start his own waste management operation. Since then, the business has grown hugely and in 1988, Tom’s sons Ian and Paul joined the business and today, they run the company as joint managing directors. Tom White ...

  • Baler initiated recycling program at Donson Machine - Case Study

    Donson found a cleaner and more economic way to dispose of their waste, when buying af baler for cardboard and plastic waste. Donson Machine purchased a Bramidan B30 W baler when they looked for a better solution for their waste disposal. The vertical baler provided them with a resolution that saves both time and money. Placed in Alsip outside Chicago, Donson Machine is a manufacturer of ...


    By Bramidan Balers

  • 6-yard dumpster was replaced by only one X10 baler and the volume of non-recyclable materials was reduced - Case Study

    Chicago Coding Systems is specialized in the supply of products and services needed by the printing, labeling and coding companies. When CCS installed a small vertical X10 baler, they cut their waste handling costs to the half. Chicago Coding Systems (CCS) - with premises in St. Charles, Illinois - provides many different solutions for printing, labeling and coding companies. CCS has more than ...


    By Bramidan Balers

  • Cosmeva acquired 7 balers X30 AD with full automatic doors - Case Study

    In order to strengthen its policy for waste recovery, valuation and flow optimization, the manufacturer of cosmetic products Cosmeva invested in 7 Bramidan balers. Centralized compaction outside was too expensive Until recently, Cosmeva relied on a complex internal organization for handling its cardboard and plastic waste. Every single production unit was generating a ...


    By Bramidan Balers

  • World famous watch manufacturer chooses Bramidan as time matters - Case Study

    Swiss leader watch designer and manufacturer TISSOT has taken advantage of the new expansion of its premises to invest in a fully automatic Bramidan channel baler to optimize waste handling procedures. For many years, Tissot had been using a 20m3 waste compactor to handle all types of waste fragments. Once full, the compactor used to be sent to an incinerator located 10 km away from the factory. ...


    By Bramidan Balers

  • Louis Vuitton`s parisian headquarter chose Bramidan’s low profile X25 and saved up to 1500 € per month on collections - Case Study

    Seeking to streamline processing costs for packaging waste, the world's leading luxury company Louis Vuitton has installed a low profile X25 baler in its Parisian premises, with a overall height that does not exceed 1885 mm. Space really matters at Louis Vuittons headquarters located in the heart of Paris 1st borough. The waste deposit is located in a narrow space saturated with containers, all ...


    By Bramidan Balers

  • More room for luxury - Case Study

    Fashionable Hilton Arc de Triomphe Paris hotel saw an instant cost reduction of 80% on waste disposal. The simple solution was to install a baler, which earned its keep in less than three months. Red carpets, polished doorknobs, and hall porters ready to hold the door and carry your luggage. This is everyday life at a luxury hotel. Less glamorous are the many tons of waste to dispose of every ...


    By Bramidan Balers

  • Herko saves time and money with a B5 W baler - Case Study

    The automotive company, Herko, located in Miami, Florida, saved up time and space after installing a B5 W baler for cardboard. Herko, a distributor of automotive parts for OEM and Aftermarket now treats their waste as an integrated part of the workflow. The placement of a Bramidan B5 W baler close to their waste source instantly optimized their waste handling solution both from a logistic and ...


    By Bramidan Balers

  • With a Bramidan mill-size baler Chicago Tech inc. is now greener than ever - Case Study

    Chicago Tech inc. improved its internal logistics, freed up warehouse space and at the same time improved the company's recycling efforts while making money on the bales in return. In the middle of 2013 Chicago Tech inc. moved to its new warehouse location in Northbrook, IL. It quickly became obvious to VP of Operations, Dan H. that they needed a solution for disposing of the many boxes they ...


    By Bramidan Balers

  • A trial period of two weeks convinced Nitta Corpartion of the right waste solution - Case Study

    The baler model B5W with a large opening offers Nitta Corporation the right solution for the processing of 25 liter bags. About Nitta - a producer of conveyors Nitta Corporation of Holland is part of Nitta Corporation of Japan. They produce quality conveyors from their plant in Alkmaar to the agriculture, automotive and food industry. The production of these conveyors is ...


    By Bramidan Balers

  • Co-digestion of press liquids of source-sorted municipal organic waste in anaerobic sludge treatment of municipal wastewater treatment plants

    This paper describes a semi-continuous laboratory-scale investigation of a potential co-substrate for mesophilic anaerobic sludge digestion in a municipal wastewater treatment plant. A feed liquid produced from source-sorted municipal organic waste by pretreatment with a screw press was subjected to the investigation. Quantities produced in press trials as well as the composition of the feed ...


    By IWA Publishing

  • Easy baling of extra large cardboard - Case Study

    Whenever genuine spare parts are needed for the vehicles made by large automobile manufacturers, the Rudolph Logistik Group in Baunatal, near Kassel/Germany, ensures they are available. Their spare parts logistics is an ingenious operation! This is now also true of the way they deal with the huge amount of waste cardboard generated. The contract logistics specialists found an optimal disposal ...


    By HSM GmbH + Co. KG

Need help finding the right suppliers? Try XPRT Sourcing. Let the XPRTs do the work for you