channel baler Equipment available in India

Available in India| Near India
37 Results found

We couldn't find any channel baler equipment in India

Here is a list of results available in India

Current filtering criteria

You can remove a filter by clicking on the x
  • Category: Waste & Recycling ×

  • Subcategory: Balers ×

  • Keyword: channel baler ×

  • Available in: Asia & Middle East ×

  • Available in: India ×

DOKON - Channel Balers

by PAAL GmbH     based in Georgsmarienhütte, GERMANY

The DOKON is a powerful and efficient baling press for recyclable materials using Poly Propylene Tying. It is equipped with shear blade system, and has three different channel cross-sections (110x75 and 110x110 cm - h x w) with high pressing forces from 1000 - 2000kN.


Macpresse - Model Mac 108/1 Series - Waste Baler

by Macpresse Europa S.R.L     based in Vernate, ITALY

The MAC 108/1 series has been appropriately designed to bale medium-large quantities of of recyclable material. Thanks to its great work flexibility this model can bale all types of waste paper, plastic containers, aluminium cans, food tins and many more recyclable products.

Macpresse - Model MAC 110/1 Series - Balers

by Macpresse Europa S.R.L     based in Vernate, ITALY

The MAC 110/1 series has been appropriately designed to bale large quantities of  recyclable materials. Thanks to its great work flexibility this model can bale all types of waste paper, plastic containers, aluminium cans, food tins and many more recyclable products.

Macpresse - Model MAC 112 - Baler

by Macpresse Europa S.R.L     based in Vernate, ITALY

The L series balers are designed and built to compact municipal solid waste, RDF and in general all recyclable materials. The MACPRESSE L series is characterized by high output and efficiency thanks to the compression cycle speed and cutting efficiency of the materials exceeding the size of the compacting chamber. The MAC 112/ baler is the largest ...

Macpresse - Model MAC 108L/1 - Balers

by Macpresse Europa S.R.L     based in Vernate, ITALY

The L series balers are designed and built to compact municipal solid waste, RDF and in general all recyclable materials. The MACPRESSE L series is characterized by high output efficiency thanks to the compression cycle speed and cutting efficiency of the materials exceeding the size of the compacting chamber. The MAC 108L/1 baler is the smallest ...

Macpresse - Model MAC 111L/1 - Baler

by Macpresse Europa S.R.L     based in Vernate, ITALY

The L series balers are designed and built to compact municipal solid waste, RDF and in general all recyclable materials. The MACPRESSE L series is characterized by high output and efficiency thanks to the thrusting cycle speed and cutting efficiency of the materials exceeding the size of the compacting chamber. The MAC 111L/1 baler is the ...

Macpresse - Model MAC 112 XL Series - Baler

by Macpresse Europa S.R.L     based in Vernate, ITALY

The MAC 112 XL series has been appropriately designed to bale large quantity of recyclable materials. Thanks to its great work flexibility this model can bale all types of waste paper, plastic containers, aluminium cans, food tins and many more recyclable products.

Macpresse - Model MAC 111/1 - Baler

by Macpresse Europa S.R.L     based in Vernate, ITALY

The MAC 111/1 series has been appropriately designed to bale large quantities of recyclable materials Thanks to its great work flexibility this model can bale all types of waste paper, plastic containers, aluminium cans, food tins and many more recyclable products.

Macpresse - Model MAC 111AS/1 - Baler

by Macpresse Europa S.R.L     based in Vernate, ITALY

The MAC 111AS/1 series has been appropriately designed to bale large quantities of  recyclable materials. Thanks to its great work flexibility this model can bale all types of waste paper, plastic containers, aluminium cans, food tins and many more recyclable products.

Macpresse - Model MAC 110L/1 - Baler

by Macpresse Europa S.R.L     based in Vernate, ITALY

The L series balers are designed and built to compact municipal solid waste, RDF and in general all recyclable materials. The MACPRESSE L series is characterized by high output and efficiency thanks to the compression  cycle speed and cutting efficiency of the materials exceeding the size of the compacting chamber. The MAC 110L/1 baler is the ...

Macpresse - Model MAC/2 Series - Multi-Material Balers for Recyclables

by Macpresse Europa S.R.L     based in Vernate, ITALY

In 2001, when we launched our new waste baler MAC/1 series, we were confident of its reliability, strength and simplicity. Over the years, we have proudly seen a huge increase in satisfaction and confidence in our company by our customers who keep choosing our balers. Their needs and advice as well as our international dealers’ suggestions ...

Macpresse - Channel Release Pressure Device

by Macpresse Europa S.R.L     based in Vernate, ITALY

Thanks to the release pressure device  (electro/hydraulic) system, in the event of a jam the operator can relieve the exit channel piston of any pressure and act directly on it. In case of a jam, the operator must press a button on the baler electrical panel to zero the pressure in the channel control cylinder, activating an automatic ...

HSM - Model SP 5088 - Large Document Shredder and Channel Baling Press

by HSM GmbH + Co. KG     based in Frickingen, GERMANY

With this waste disposal station, HSM combines the large document shredder FA 500.3 with a channel baling press. It is therefore particularly perfect for use in archives or central stations for document shredding, even in large quantities, which are then compressed into bales of up to 90 kg as needed.

Enerpat - Model ESB5000 - Shear Baler

by Enerpat Group UK Ltd     based in Brentwood, UNITED KINGDOM

Robust Building With Europe Brand Parts. Prefect For Car Body Baling And Shearing.  Powerful pressing lid. Germany Made Blades. Siemens Motor Drive.

Bramidan - Model HC50 - Horizontal Balers

by Bramidan Balers     based in Bramming, DENMARK

For large volumes of waste; The HC50 is suitable for customers who have very large volumes of cardboard, plastic or paper.

Enerpat - Model ESB6300 - Shear Baler

by Enerpat Group UK Ltd     based in Brentwood, UNITED KINGDOM

Robust Building With Europe Brand Parts. Prefect For Car Body Baling And Shearing.  Powerful pressing lid. Germany Made Blades. Siemens Motor Drive.

Model CC - Balers

by PRESTO GmbH & Co KG     based in Bad Laer, GERMANY

PRESTO horizontal balers are perfectly suitable for compacting recyclable materials into stable, high-density bales. The material is compacted by a horizontally mounted compaction plate driven by an electro-hydraulic motor. This guarantees the continuous feeding of the machine, and the integration of the production process is ensured. PRESTO ...

Fendt - Square Balers

by Fendt - part of AGCO Corporation     based in Marktoberdorf, GERMANY

The first square baler left the factory in Hesston, Kansas, over 30 years ago. It laid down the foundation for one of the greatest success stories in harvesting technology. The Fendt square balers have been produced here, in the sole possession of the AGCO Corporation, since 2000. Based on decades of experience in development and production, they ...

Model HPK - Balers

by PRESTO GmbH & Co KG     based in Bad Laer, GERMANY

PRESTO horizontal balers compact recyclables in to solid cubical-shaped bales. The material is compacted by a horizontally mounted compaction plate with an electro-hydraulic drive system. This guarantees the continuous feeding of the machine, and the integration of the production process is ensured. PRESTO horizontal balers of the HPK-Series are ...

Model DH & XH - Balers

by Presona AB     based in Tomelilla, SWEDEN

The DH & XH balers are all equipped with Presona’s unique two-step pre-press system. This system allows a feed opening of 2200 mm – all the way from the feed opening down to the bottom of the press chamber. The powerful XH balers with a combined press force of 210 tons, channel format 1100 x 1100 and a power pack of 2 x 75 kW can ...

Related Terms for channel baler

Need help finding the right suppliers?

Let the XPRTs do the work for you