Only show results available in Virginia? Ok

Biosolids Reduction (Biosolids) equipment

  • ThickTech - Rotary Drum Thickner (RDT)

    The ThickTech Rotary Drum Thickener (RDT) is the industry leading sludge thickener. Its performance is unmatched, with sludge volume reduction of 90% and a 98% capture rate. In addition, this superior performance is achieved with very low amounts of polymer. The ThickTech™ system is quite compact and requires less floor space than other ...

    By Parkson Corporation based in Fort Lauderdale, FLORIDA (USA). from Biosolids Management Product line

  • Gravabelt - Gravity Belt Thickener

    Gravabelt Gravity Belt Thickeners reduce sludge volume of biosolids and waste activated sludge and produce a pumpable concentrate for dewatering, treatment, or transport. The K-S Gravabelt uses only gravity and a porous drainage belt along with our Roto-Kone High Rate Drainage system to enhance thickening performance at a reduced operating cost.

    By Komline-Sanderson based in Peapack, NEW JERSEY (USA). from Municipal Sludge and Biosolids Product line

  • RDP - Hybrid Evaporator

    The Hybrid Evaporator can be operated as a pasteurizer or a dryer. In both cases, biosolids are automatically loaded from a storage bin. The biosolids are processed on a batch basis. The Evaporator utilizes a rotor mounted on a stationary drum, both of which are heated using a thermal fluid. The entire assembly is mounted on load cells. When the ...

    By RDP Technologies, Inc. based in Conshohocken, PENNSYLVANIA (USA). from Biosolids Stabilization Systems Product line

  • ThickTech - Rotary Drum Thickner

    The ThickTech Rotary Drum Thickener (RDT) is the industry leading sludge thickener. Its performance is unmatched, with sludge volume reduction of 90% and a 98% capture rate. In addition, this superior performance is achieved with very low amounts of polymer. The ThickTech system is quite compact and requires less floor space than other thickeners. ...

    By Entech Environmental and Industrial Equipment based in Laguna Niguel, CALIFORNIA (USA). from Biosolids Management from Parkson Corporation Product line

  • TPS ThermAer - For Biosolids Management

    Today, biosolids disposal is more complex than ever. Many states have imposed restrictive legistlation on land application, composting and land fills. Volume reduction and odor control are key elements in successful biosolids management. Now, thanks to ThermAer you have a solution.Superior volatile solids reduction independent of outside ...

    By Thermal Process Systems, Inc. based in Crown Point, INDIANA (USA).

  • FreshAWL WOW-AIR - Model B28 - Biosolids and Pond Algae Control System

    Manufactured according to the EPA's standards for DfE, FreshAWL WOW-AIR B28™ is designed for treating wastewater treatments where high concentrations of biosolids are present such as: Return Activated Sludge (RAS) Digestors, Compost Fields, Algae Overgrown Retention Ponds where a solution for odor elimination, sludge reduction and vector ...

    By FreshAWL, LLC based in Concord, CALIFORNIA (USA). from Wastewater Treatment Systems Product line

  • Premium

    HTI - Model B2 - Unique and Automated Lime System

    This unique and automated system feeds the correct amount of liquid lime (CACO calcium oxide) to any type of liquid biosolids for achieving EPA 503 Class 'B' stabilization results. This system can be adapted almost any type of WWTP for the stabilization of biosolids. This system provides a very simple method to achieve Class 'B' stabilization and ...

    By WeDoTanks.com LLC based in Sahuarita, ARIZONA (USA). from Wastewater Treatment Product line

  • BioFicient - Wastewater Treatment Systems

    The patented BioFicient Process presents an innovative approach for pre-engineered wastewater treatment systems: specifically, reducing biosolids wasting and handling requirements. This means no complex plant operation or RAS/WAS calculations and minimal reduced biosolids to handle, haul and dispose.

    By Smith & Loveless Inc. based in Lenexa, KANSAS (USA). from Wastewater Treatment Systems Product line

  • Municipal Waste Water Treatment Plants

    Biosolids is the product created by treatment of sewage solids in Municipal Waste Water Treatment Plants. The thickened sludge is pumped to a belt press where it is dewatered to 13%-20% solids, which in most instances is Class B Biosolids in accordance with 40 CFR Part 503. The Tempest processes the Class B biosolid into a Class A material in one ...

    By Global Resource Recovery Organization (GRRO) based in Eldora, IOWA (USA).

  • SNDR - Storage Nitrification Denitrification Reactor

    The importance of producing a high-quality cake and reducing recycle constituents cannot be overstated. With the advent of Storage Nitrification Denitrification Reactor (SNDR), thermophilic sludges can be dewatered more economically, producing a very high-quality end product. Mesophilic conditioning - as provided in the SNDR, prior to dewatering ...

    By Thermal Process Systems, Inc. based in Crown Point, INDIANA (USA).

  • Berlie - Drying Filter Press

    Impressive advantages; Reduces operation and transport costs drastically. Produces Class A Biosolids from liquid sludge in a safe and enclosed environment without the need for additional dewatering equipment. Operates with minimal supervision due to its high level of automation. Generates no noise or odor disturbances in the neighborhood. Operates ...

    By Berlie-Falco Technologies Inc. based in La Prairie, QUEBEC (CANADA).

  • The Eco Solids Process

    The Eco-Solids Process is a continuous lime stabilisation process suitable for treating all types of sewage sludge. In particular, the Eco-Solids Process is able to treat Surplus/Secondary Activated Sludge (SAS), which is considered difficult to treat. The process produces an enhanced treated biosolid product (or a Class A/Exceptional Quality (EQ) ...

    By Ecosolids International Ltd based in New Milton, UNITED KINGDOM.

  • QuikSoil - Model 2900 - Bio Solids

    The dosage rate for QuikSoil 2900 ranges from 3 to 6 ounces per wet ton of biosolids, depending on intensity and offensiveness of the odor. Water is added to the QuikSoil® 2900 to provide enough liquid to facilitate mixing. Typically, 80 to 100 ounces of water are added to each wet ton along with the 2900. This amounts to 6 to 7 pounds of ...

    By Global Odor Control Technologies, LLC (GOC) based in Bloomington,, INDIANA (USA). from Bio Solids Product line

  • Taskmaster - Model TM4000 - High-Power Heavy Series Shredders

    Designed for the heaviest shredding applications, the TASKMASTER TM4000 gets the tough jobs done quickly and efficiently with low maintenance. Each TASKMASTER is custom built to meet your exact application requirements and built with Franklin Miller's high level of precision and quality These are twin shaft shredders designed to provide effective ...

    By Franklin Miller Inc. based in Livingston, NEW JERSEY (USA). from Solid Waste Shredders Product line

  • Tempest Drying System

    The TEMPEST Drying System is a cyclonic dryer manufactured to meet the specific needs of each customer. The design of the system is dependent upon the type of material to be processed. If a variety of materials are to be processed with one unit, then the design will be a function of the limiting material. The Tempest has received a patented status ...

    By Global Resource Recovery Organization (GRRO) based in Eldora, IOWA (USA).

Need help finding the right suppliers? Try XPRT Sourcing. Let the XPRTs do the work for you