Only show results in Virginia? Ok

class a biosolids Equipment

  • Premium

    Model Class A - Septage Treatment

    The 'Ultimate' Septage Receiving & Processing Facility. No Odor. No Air Pollution. Class 'A' Concentrate (Biosolids). Very Clean Condensate.

    By WeDoTanks.com LLC based in Sahuarita, ARIZONA (USA). from Wastewater Treatment Product line

  • Bioset Process

    The Bioset process achieves Class ‘A' biosolids via the time vs. temperature equation and pH adjustment per the EPA 503 regulations. Temperature is achieved through the addition of Quicklime and Sulfamic acid and the high pH is achieved through the addition of the Quicklime. Biosolids and chemicals are homogenously mixed in a Schwing Bioset ...

    By Schwing Bioset, Inc. based in Somerset, WISCONSIN (USA). from Bioset Process - Class A Biosolids Product line

  • THERMO-SYSTEM - Active Solar Sludge Dryer

    Parkson’s THERMO-SYSTEMuses the sun as its main power source to generate 95% of the energy required for drying sludge.  The result is significantly reduced operating costs compared to competing technologies like conventional gas or oil fired dryers. The system’s sustainable, drying process is fully automated and is designed with ...

    By Parkson Corporation based in Fort Lauderdale, FLORIDA (USA). from Biosolids Management Product line

  • Komline-Sanderson - Biosolids Dryer System for Biosolids and Biological Sludge Drying

    The Komline-Sanderson Biosolids Drying System uses indirect drying technology to convert municipal and industrial biological sludge into a sterile, free flowing granular product. The dried biosolids can be beneficially reused as a slow release nitrogen fertilizer, soil amendment additive or as a green fuel in a boiler and cement kiln. The K-S ...

    By Komline-Sanderson based in Peapack, NEW JERSEY (USA). from Municipal Sludge and Biosolids Product line

  • EnVessel Pasteurization

    When the EPA 503 Regulations were first enacted the RDP EnVessel Pasteurization Process was the most popular Class A Process on the market due to it's simplicity, cost effectiveness and the market demand for lime. RDP has over 60 operating systems in the USA making the EnVessel Pasteurization process one of the most popular Class A processes ...

    By RDP Technologies, Inc. based in Conshohocken, PENNSYLVANIA (USA). from Biosolids Stabilization Systems Product line

  • RDP - Precision Lime Stabilization System

    The RDP Precision Lime Stabilization Systems combines over 30 years of first hand experience with robust equipment, in a clean, workmanlike, arrangement that results in a simple but clean Class B sludge/lime stabilization system that is practical, simple to operate for years without much regular operator attention or maintenance.

    By RDP Technologies, Inc. based in Conshohocken, PENNSYLVANIA (USA). from Biosolids Stabilization Systems Product line

  • BIO-SCRU - Biosolids Drying System

    Choosing the right drying system for your treatment plant is essential to maximizing cost efficiencies and reducing environmental impact. The BIO-SCRU dryer system eliminates pathogens and reduces moisture content to 90% and volume to typically 20% or less. The BIO-SCRU® is a simple, easy to maintain dryer system, with a small footprint. The ...

    By KMT International, Inc. based in Fremont, CALIFORNIA (USA). from Biosolids Drying System Product line

  • RDP - Hybrid Evaporator

    The Hybrid Evaporator can be operated as a pasteurizer or a dryer. In both cases, biosolids are automatically loaded from a storage bin. The biosolids are processed on a batch basis. The Evaporator utilizes a rotor mounted on a stationary drum, both of which are heated using a thermal fluid. The entire assembly is mounted on load cells. When the ...

    By RDP Technologies, Inc. based in Conshohocken, PENNSYLVANIA (USA). from Biosolids Stabilization Systems Product line

  • THERMO-SYSTEM - Active Solar Sludge Dryer

    Parkson’s THERMO-SYSTEMuses the sun as its main power source to generate 95% of the energy required for drying sludge.  The result is significantly reduced operating costs compared to competing technologies like conventional gas or oil fired dryers. The system’s sustainable, drying process is fully automated and is designed with ...

    By Entech Environmental and Industrial Equipment based in Laguna Niguel, CALIFORNIA (USA). from Biosolids Management from Parkson Corporation Product line

  • TPS ThermAer - For Biosolids Management

    Today, biosolids disposal is more complex than ever. Many states have imposed restrictive legistlation on land application, composting and land fills. Volume reduction and odor control are key elements in successful biosolids management. Now, thanks to ThermAer you have a solution.Superior volatile solids reduction independent of outside ...

    By Thermal Process Systems, Inc. based in Crown Point, INDIANA (USA).

  • BIO-SCRU - Model IC Series - Biosolids Dryer System

    As the challenges of disposing of Class B biosolids become more daunting, forward-thinking treatment plants are searching for cost effective solutions that will help their communities become EPA-compliant. For many reasons the disposal of Class B has become a problem. Transportation cost and tipping fees are soaring, in some instances landfills ...

    By Therma-Flite Inc. based in Benicia, CALIFORNIA (USA).

  • ThermAer TerSolair - Biosolids Management Software

    A Combination of Proven Technologies Offers an Exceptional Biosolids Management Process. Some of the best equations are the most simple. The combination of ThermAer + TerSolair offers you the smartest, most forwarding thinking biosolids management process available today.

    By Thermal Process Systems, Inc. based in Crown Point, INDIANA (USA).

  • FreshAWL - Model WOW-AIR B28™ - Biosolids and Pond Algae Control System

    Manufactured according to the EPA's standards for DfE, FreshAWL WOW-AIR B28 is designed for treating wastewater treatments where high concentrations of biosolids are present such as:

    By FreshAWL, LLC based in Concord, CALIFORNIA (USA). from Wastewater Treatment Systems Product line

  • Cambi - Biosolids Treatment - Thermal Hydrolysis Sludge Pre-treatment

    Cambi Thermal Hydrolysis Sludge Pre-treatment Technology for Enhanced Anaerobic Digestion of Municipal and Industrial Sludge. Cambi’s Thermal Hydrolysis Process (THP) is a proven and reliable technology that has been used around the world since 1995. THP has been implemented in existing and “green field” projects designed to ...

    By Cambi AS based in Asker, NORWAY. from Technologies Product line

  • Premium

    HTI - Model B2 - Unique and Automated Lime System

    This unique and automated system feeds the correct amount of liquid lime (CACO calcium oxide) to any type of liquid biosolids for achieving EPA 503 Class 'B' stabilization results. This system can be adapted almost any type of WWTP for the stabilization of biosolids. This system provides a very simple method to achieve Class 'B' stabilization and ...

    By WeDoTanks.com LLC based in Sahuarita, ARIZONA (USA). from Wastewater Treatment Product line

  • CleanB

    CleanB is BCR’s patented Class B residuals treatment solution. The CleanB system chemically conditions Waste Activated Sludge (WAS) and produces Class B biosolids in less than 10 minutes.

    By BCR Environmental based in Jacksonville, FLORIDA (USA).

  • Municipal Waste Water Treatment Plants

    Biosolids is the product created by treatment of sewage solids in Municipal Waste Water Treatment Plants. The thickened sludge is pumped to a belt press where it is dewatered to 13%-20% solids, which in most instances is Class B Biosolids in accordance with 40 CFR Part 503. The Tempest processes the Class B biosolid into a Class A material in one ...

    By Global Resource Recovery Organization (GRRO) based in Eldora, IOWA (USA).

  • Sludge Stabilisation

    Dirk mobile centrifuge feeding an Anglian Water liming plant at Kings Lynn sewage treatment works. The chapter 'Sludge Stabilisation' highlights the requirements of the water industry. Alkaline stabilisation is one possible tool to meet those requirements and an approved process for the production of agricultural biosolids. DIRK is a specialist in ...

    By Dirk European Holdings LTD based in Prenton, UNITED KINGDOM.

  • MaxWest - Model MW500 - Gasification System

    The MaxWest Gasification System uses biosolids from wastewater treatment plants as feedstock. Our unique and proprietary process converts the organic content of this residual material into green thermal energy and inert ash.

    By MaxWest Environmental Systems based in Lake Mary, FLORIDA (USA).

  • The Eco Solids Process

    The Eco-Solids Process is a continuous lime stabilisation process suitable for treating all types of sewage sludge. In particular, the Eco-Solids Process is able to treat Surplus/Secondary Activated Sludge (SAS), which is considered difficult to treat. The process produces an enhanced treated biosolid product (or a Class A/Exceptional Quality (EQ) ...

    By Ecosolids International Ltd based in New Milton, UNITED KINGDOM.

Need help finding the right suppliers? Try XPRT Sourcing. Let the XPRTs do the work for you