Briquetting Systems Equipment available in Liechtenstein

Available in Liechtenstein| Near Liechtenstein
192 Results found

We couldn't find any results in Liechtenstein

Here is a list of results available in Liechtenstein

Current filtering criteria

You can remove a filter by clicking on the x
  • Category: Waste & Recycling ×

  • Subcategory: Briquetting Systems ×

  • Available in: Europe ×

  • Available in: Liechtenstein ×

VIBRA-MILL - Vibratory Batch Sand Reclamation

by General Kinematics     based in Crystal Lake, ILLINOIS (USA)

Shakes, agitates, vibrates, tumbles, and abrades up to 4 foot lumps to minus 20 mesh grain size. Automatically. The Vibra-Mill lumpbreaker attrition mill has proved itself in scores of foundries as both a total attrition mill or as a sand preconditioner. It often eliminates the need for larger, more costly equipment and systems while actually ...

SAHUT CONREUR - Integrated System

by SAHUT-CONREUR     based in Raismes, FRANCE

SAHUT-CONREUR provides compact and complete turnkey systems (including electrical interlocking and interfacing control) integrating others around the briquetting press. These briquetting units are built to meet specific needs (space available,…)

Biomass Briquetting Press

by Harshad Engineering     based in Rajkot, INDIA

We supply piston/ram type biomass briquetting equipments from India. Our machines are mechanical ram or piston type presses with high prodcution capacity from 600 to 1600 Kg per hour with 60mm to 90mm diameter solid cylindrical briquette logs.Rawmaterial can be any type of agricultural wastes, wood wastes and forestry wastes. Our machines are ...

BRIK - Model MB90 - Mechanical Briquetting Presses

by DIPIU srl     based in Breganze (VI), ITALY

The mechanical briquetting press develops a compression force of approximately 2000 Kg. per square centimeter to obtain an high quality briquette having a high specific weight and a remarkably reduced volume, without added adhesives.

BRIK - Model MB50 - Mechanical Briquetting Presses

by DIPIU srl     based in Breganze (VI), ITALY

The mechanical briquetting press develops a compression force of approximately 2000 Kg. per square centimeter to obtain an high quality briquette having a high specific weight and a remarkably reduced volume, without added adhesives. The material to be briquetted must be cellulosic and dry (having a moisture content between 10 and 14%). The hourly ...

Model BK 250 - Briquetting Plants

by MKR Metzger GmbH     based in Monheim, GERMANY

Waste products are converted to exploitable secondary raw materials, value creation through high yields of metal and grinding sludge briquettes, few wearing parts are used to avoid malfunction periods, 3-step briquetting procedure, low residual moisture content in the briquettes.

Schuko - Briquetting Presses

by Schuko H. Schulte-Südhoff GmbH     based in Bad Laer, GERMANY

Save space and money by reduction your waste volume. The briquette presses by Schuko can make a substantial contribution to reducing the amount of space required to collect dust and shavings. Wood shavings briquettes require a minimum of storage space and have an excellent thermal value.

BRIK - Model MB100 - Mechanical Briquetting Presses

by DIPIU srl     based in Breganze (VI), ITALY

The mechanical briquetting press develops a compression force of approximately 2000 Kg. per square centimeter to obtain an high quality briquette having a high specific weight and a remarkably reduced volume, without added adhesives.

Charcoal Briquetting Plant

by ACAN Makina Imalat Sanayi Ve Dis Tic. Ltd. Sti.     based in Esenyurt, TURKEY

Industrial application of charcoal, through briquettes. The history of charcoal and history of metallurgy are closely connected. Charcoal long years was unique fuel for metallurgy. The beginning of 'Iron Age' IX... of VII centuries up to the middle of XVIII century, manufacture of charcoal was the developed industry. Our ancestors applied charcoal ...

Shredder

by Gökmasan Ltd.     based in Nilüfer / Bursa, TURKEY

Long and bushy swarf is broken up at a low rotating speed continuesly by the horizantal swarf shredder. Available for the carbon steel, stainless steel, aluminium alloys, titanium, 1200 N/mm2 and higher tensile stregth alloys and easily mounted before swarf briquetting press and chip wringer. Swarf is fed through the upside part of the shredder. ...

Manganese Briquetting Plant

by ACAN Makina Imalat Sanayi Ve Dis Tic. Ltd. Sti.     based in Esenyurt, TURKEY

Now in Russia sharp deficiency of manganese ores is felt. The modern need of the industry makes 1,3 million tons of manganese concentrates. As a result of enrichment fine products are formed. The reconnoitered stocks of manganese ores in Russia make 148 million tons which are concentrated in 13 fine deposits of the North-Ural manganese -mining ...

BRIK - Model MB110 - Mechanical Briquetting Presses

by DIPIU srl     based in Breganze (VI), ITALY

The mechanical briquetting press develops a compression force of approximately 2000 Kg. per square centimeter to obtain an high quality briquette having a high specific weight and a remarkably reduced volume, without added adhesives.

BRIK - Model MB60 - Mechanical Briquetting Presses

by DIPIU srl     based in Breganze (VI), ITALY

The mechanical briquetting press develops a compression force of approximately 2000 Kg. per square centimeter to obtain an high quality briquette having a high specific weight and a remarkably reduced volume, without added adhesives.

Model BK 25 - Briquetting Plants

by MKR Metzger GmbH     based in Monheim, GERMANY

Waste products are converted to exploitable secondary raw materials, value creation through high yields of metal and grinding sludge briquettes, few wearing parts are used to avoid malfunction periods, 3-step briquetting procedure, low residual moisture content in the briquettes.

Model BK 170 - Briquetting Plants

by MKR Metzger GmbH     based in Monheim, GERMANY

Waste products are converted to exploitable secondary raw materials, value creation through high yields of metal and grinding sludge briquettes, few wearing parts are used to avoid malfunction periods, 3-step briquetting procedure, low residual moisture content in the briquettes.

BRIK - Model MB80 - Mechanical Briquetting Presses

by DIPIU srl     based in Breganze (VI), ITALY

The mechanical briquetting press develops a compression force of approximately 2000 Kg. per square centimeter to obtain an high quality briquette having a high specific weight and a remarkably reduced volume, without added adhesives.

C. F. Nielsen - Briquette Breaker

by C. F. Nielsen A/S     based in Baelum, DENMARK

The CFN briquette breaker is a more economical and faster alternative to our BS 350 automatic briquette saw. The CFN briquette breaker is an ideal solution for rough breaking briquettes in similar length before packing in shrink film or cardboard boxes. The length of the briquettes can be adjusted from 200-350 mm and will vary +/- 10-15 mm in ...

Model PBC - Briquetting Presses

by Akros Danieli Henschel     based in CHAMBERY, FRANCE

Danieli Henschel briquetting presses are suitable for a wide range of applications. They can be used in the car industry as well as in scrap yards. The briquetting presses are designed for processing wood and mill shavings, ferrous and non ferrous metals, and for turning and drilling chips as well as granulate and mixed briquetting. ...

Briquetting Systems

by New Air Technical Services Limited     based in Leicester, UNITED KINGDOM

New Air has sold many briquetting systems over the years and the advantage over most other systems is that very high compaction rates are achievable, up to 40:1 compaction and there is no need to use any additives to achieve a solid briquette. The machines are basically screw fed pistons that compress material into 50, 60 or 65 diameter solid ...

Carbon Black Briquetting Plant

by ACAN Makina Imalat Sanayi Ve Dis Tic. Ltd. Sti.     based in Esenyurt, TURKEY

Briquette making of carbon black from pyrolysis process of scrap tyre. Carbon black has higher calorific value, fixed carbon and low sulphur and ash content; it can be potentially used as high quality fuel either in briquettes. The briquette making of fine carbon (powder form) from scrap tyre pyrolysis plant is slightly more difficult than ...

Need help finding the right suppliers?

Let the XPRTs do the work for you