Only show results available in Virginia? Ok

Can Recycling Applications

  • Premium

    Transport & Logistics - Sorting and Tracking

    In shipping terminals, automated sorting is a must when handling large volumes of parcels. METTLER TOLEDO’s data capture solutions provide accurate information for each parcel moving on a conveyor and assigns them to the correct lanes with maximum throughput. The solutions can be configured to handle all types of sorting methods such as tilt trays, swing-arms, pop-ups and more. The system also gives updated information to the track-and-trace system.

    By Mettler - Toledo Int. Inc based in Greifensee, SWITZERLAND.

  • Premium

    Recycling sorting solutions for the wood industry

    TOMRA Sorting can help you sort the contaminants out of wood.

    By TOMRA Sorting GmbH. based in Mülheim-Kärlich, GERMANY.

  • Premium

    Waste sorting solutions for the bulky waste

    Bulky waste sorting can produce a high number of valuable materials. The accessibility of these materials, however, is challenging due to its cumbersome nature.

    By TOMRA Sorting GmbH. based in Mülheim-Kärlich, GERMANY.

  • Premium

    Magnets for the food processing and pharmaceuticals industry

    Master Magnets manufacture a wide range of food-grade magnetic separation and metal detection equipment for the efficient removal of metallic contaminants. Many types of metal can enter a food processing line and magnetic separators are often utilised to protect the product stream from nuts, bolts and other machinery parts that inadvertently fall from upstream processing equipment. Where food and pharmaceuticals are processed, there is a need to protect the possibility of tramp metal entering and contaminating the product stream.

    By Master Magnets Ltd based in Redditch, UNITED KINGDOM.

  • Premium

    Magnets for the laboratory equipment industry

    Laboratory and pilot versions of mineral separators give results in laboratory conditions, which can be directly related to full scale production machines.

    By Master Magnets Ltd based in Redditch, UNITED KINGDOM.

  • Premium

    Recycling equipments for tyre recycling

    Used tyres are among the largest and most problematic sources of waste today, due to the large volume produced and their durability. The same characteristics which make waste tyres a waste problem also make them one of the most re-used waste materials. Recycled tyre chips can be used for TDF (Tyre Derived Fuel) which is a fuel used for heat plants and cement ovens or for equestrian (i.e. rubber mixed with sand or sawdust used in the horse industry as ground in the stable or at the tracks). Rubber granulate is reused in e.g. sports fields, artificial turfs, rubber mats and moulded products. Rubber powder can be reused in rubber paved asphalt. The recovered steel can be smelted and reused just like non-recovered steel. Finally, the liberated textile has a very high effective burning value and can therefore be mixed with other materials in order to increase that material’s effective burning value. Read more: http://eldan-recycling.com/en/tyre-recycling

    By Eldan Recycling A/S based in Faaborg, DENMARK.

  • Premium

    Pre-sorted Material Sorting

    TOMRA can help you sort the value out of Pre-sorted material. The input material of pre-sorted plastics will usually contain materials such as bottles and foil. Before recycling, any impurities need to be cleaned out in order to sort out any residue of organic matter, metals, PVC or coloured PET. The material is checked for colour and material. In the bottle-to-bottle procedures highest and consistent quality standards are required.

    By TOMRA Sorting GmbH. based in Mülheim-Kärlich, GERMANY.

  • Premium

    Metal sorting for the metal recycling industry

    Metals can be identified according to the colour, nature of the metal and of elemental composition.

    By REDWAVE a division of BT-Wolfgang Binder GmbH based in Gleisdorf, AUSTRIA.

  • Premium

    Plastic sorting for the plastics industry

    REDWAVE is a flexible system with applications in a variety of fields, especially for the plastics industry. No matter how complex the sorting task may be the REDWAVE range of sorting equipment can achieve high levels of purity. REDWAVE guarantees high waste throughput with effective recovery of required materials, achieving maximum return on the separated commodities.

    By REDWAVE a division of BT-Wolfgang Binder GmbH based in Gleisdorf, AUSTRIA.

  • Premium

    Recycling equipments for aluminium recycling

    Aluminium items are eminently suited to recycle. Did you know that aluminium can be recycled infinitely without losing quality? Recycling aluminium beverage cans saves 95% of the energy used making an aluminium can, compared to making it from raw bauxite. The energy saved from recycling one aluminium Coca Cola can will run a TV for three hours. If not recycled, it takes 80-100 years for an aluminium can to break down in a landfill.

    By Eldan Recycling A/S based in Faaborg, DENMARK.

  • Premium

    Jaw bucket crushers for recycling industry

    MB is the ideal solution for recycling all types of aggregate on site. With the use of screening buckets, it is possible to recycle, prepare and obtain materials from different types of processes, which can be used directly in the worksite, or sold. Not having to transport and dispose the material but instead being able to reuse it immediately, grant for significant savings and advantages in terms of sustainability and respect for the environment. Fills and new constructions can be carried out with the same materials present on-site, without having to bring in materials.

    By MB Crusher based in Fara Vicentino, ITALY.

  • Premium

    Jaw bucket crushers for urban job site and road works

    MB`s range allows for the crushing, recycling and reusing of materials to create roadbeds, drainage beds and dig fills directly at the worksite, thus reducing the cost of material transportation. Characterised by reduced dimensions and weight, MB also proves to be the ideal choice for small urban sites, or when special attention to the surrounding environment or architecture is necessary. With MB to work in historical urban centres and important sites is no longer a problem, and it can offer a new source of income for building companies.

    By MB Crusher based in Fara Vicentino, ITALY.

  • Premium

    Shredders and crushers for special waste recycling

    Stopping the spread of hazardous waste! Ever-increasing consumption across Europe, coupled with rising prosperity among the populations of the typical emerging economy are causing a sharp upturn in the volume of waste worldwide. The shredding and sorting of rubbish and refuse is one of the key challenges within the waste management cycle. And with ERDWICH shredding machinery and plant, there is a perfect set of solutions for meeting any of these challenges in special waste applications.

    By Erdwich Zerkleinerungssysteme GmbH based in Igling, GERMANY.

  • Premium

    Recycling of Used Beverage Cans (UBC)

    The Eldan Recycling System for UBC (Used Beverage Cans) is designed for processing loose or baled aluminium cans to be used as an alternative to virgin aluminium. Aluminium is used in many modern products like pots and pans, building materials and beverage cans. By recycling the aluminium in the UBC, up to 95% of the energy used in production can be reduced compared to production with virgin aluminium, proving aluminium recycling a profitable business! To ensure the product is pure, the cans can be downsized with the Eldan UBC Recycling System where ferrous metals, zinc, brass, organics, etc. is removed from the aluminium fraction. Furthermore, the density of the processed aluminium is higher, thus reducing the transportation costs. Depending on the specific customer requirements, the Eldan UBC Recycling System can be tailored to fit the demand. The modular build enables the possibility of upscaling production in the future.

    By Eldan Recycling A/S based in Faaborg, DENMARK.

  • Premium

    Shredding solutions for on board (marpol)

    The restricted operating spaces on board of a boat make essential the use of compact shredders for optimizing it. These shredders must ensure the required performance in terms of shredding capacity. SatrindTech proposes three models: one at 3hp, one at 10hp and one at 15hp. SatrindTech’s shredders at 3hp are MARPOL 73/78 – Annex V, approved. The other two models available, the 10 and the 15hp models can use special blade sets that can grant the same performances of the certified shredder. The goal to grant a

    By SatrindTech Srl based in Arluno, ITALY.

  • Premium

    Shredding solutions for aluminum cans

    The shredding process of aluminum cans, pressed or loosen, is done using two-shaft shredders. After that, in order to proceed with the briquetting phase, it is necessary to shred again the material using single-shaft, three- or four-shaft shredders for obtaining a controlled size. In addition to that SatrindTech offers customized solutions for a solid and liquid separation in case the material to be treated are filled cans.

    By SatrindTech Srl based in Arluno, ITALY.

  • Premium

    Hose pumps for brewery industry

    Breweries, whether large or small, are driven by the two key requirements of plant profitability and consistent product quality. In order to satisfy these goals, it is important that equipment and machinery used in the process is of the highest standard. Pumps in particular should perform as expected, be reliable and easy to maintain and of course have a low cost of ownership.

    By Albin Pump SAS based in Montelimar, FRANCE.

  • Premium

    Waste compaction for the cardboard & paper recycling industry

    Cardboard is by volume one of the most commonly recovered recyclables. HSM provides balers for use with cardboard in many different scenarios from small volumes, with the aim of creating a tidy, efficient work area is the main aim through to demanding, high volume situations where a baler which can deal easily with throughputs of many bales per hour is required. Our new generation of modern balers have been created to use low levels of energy, generate a minimum level of noise and operate without the need for constant supervision. HSM has a wide range of balers for use in industrial and manufacturing settings. Many materials including, cardboard, paper, plastic packaging, PET Bottles/other rigid plastics and drinks cans can be successfully baled using one of HSM’s high specification balers.

    By HSM GmbH + Co. KG based in Frickingen, GERMANY.

  • Premium

    Shredding solutions for drums and cubitainers

    The drums (from 5 to 220 lt) and the IBCs in HDPE are used for the transport and storage of liquids in countless industrial fields, alimentary and not. The shredders proposed by SatrindTech for this application are two-shaft type in the case of a simple volume reduction, used for achieving an optimization of the logistic processes (resulting in significantly reduce transport costs and material storage once shredded) and single-shaft, three- and four-shaft if the goal is to recycle material discarded from the production line. The two-shaft shredders can also be fitted with the special CL counterblade system that allows a controlled size of the material whilst shredding.

    By SatrindTech Srl based in Arluno, ITALY.

  • Premium

    Shredding solutions for textile and carpets industry

    All those textile materials (derived from natural or synthetic fibers) arrived at the end of the cycle, carpeting and rugs are shredded and used inside the mix of materials composing the RDF or SRF. The operation can be carried out in two or in one single stage. A two-stage process (volume reduction with two-shaft shredders and subsequent refinement of the final size of the material with single-, three- or four-shaft shredders) will grant a higher production and energy saving (in proportion) while, if processed directly with single-, three- or four-shaft shredders, the production rate will be less and the energy consumption could be relatively higher.

    By SatrindTech Srl based in Arluno, ITALY.

Need help finding the right suppliers? Try XPRT Sourcing. Let the XPRTs do the work for you