Can Recycling News

  • Two-shaft shredders put to sea

    It would be best for our latest four two shaft shredders if they do not suffer from sea-sickness, otherwise acclimatization to life on a large pipeline ship could be a long process. On board they will be used for volume reduction of steel swarf. On board a ship volume reduction is particularly important because of the limited space available. In addition, this ...

  • UNTHA XR waste shredder hits one million operational hours

    Austrian-headquartered shredding specialist UNTHA has just dispatched its 150th waste shredder. The XR mobil-e is heading to France where, when commissioned, it will process 25 tonnes per hour of C&I waste down to 80mm particle size. But this machine had a particularly special ‘send-off’ when it left UNTHA’s manufacturing plant in Salzburg. From its ...


    By UNTHA Shredding Technology

  • Designed to Perform: Metso’s M&J FineShred Series New sharp members of the Metso family

    The RDF Production Specialist The M&J FineShred series consists of one-shaft shredders ideal for all recycling purposes. The shredder handles a wide range of different materials in bales, rolls, bricks or loose – and is highly suitable for RDF production, delivering a throughput of up to 17 tons per hour. Designed to ...


    By eFACTOR3 LLC

  • The Recycling Technik in Dortmund is starting tomorrow

    “For the fourth time, international and national providers of recycling solutions will come together with decision makers. The trade show’s main focus is all about machinery and technical components for recycling and environmentally responsible disposal: from balers and shredding machines, sorting systems and crushers, to sieving and separating machines, through to conveyor systems ...

  • UNTHA reveals third generation waste shredder

    The UNTHA XR was first brought to market as a robust pre-shredder that could effectively process a myriad of municipal, commercial and industrial wastes in readiness for the alternative fuel production market. But committed to strengthening the profitability of clients’ operations – not just their functional capabilities – the Austrian-headquartered team continued to ...

  • The Lindner universal shredder securely destroys top-secret data

    Since the end of 2014 the REISSWOLF Akten- und Datenvernichtung GmbH in Frankfurt, Germany has been the proud owner of a single shaft universal shredder, the Micromat 2000 by Lindner Recyclingtech. Documents and storage devices bearing strictly confidential information are destroyed using the highest safety standards available. The high throughput and highly reliable process stability of the ...


    By Lindner-Recyclingtech GmbH

  • Rotork CK valve actuators deliver intelligent modular solutions

    Built on the cornerstones of reliability and safety inherent in all Rotork products, the CK enhances the scope of Rotork flow control technology. The modular CK design provides flexibility and configurability, enabling quick selection from stock to meet customer specification with short lead times. The torque range facilitates reliable operation of valve types and sizes typically found in ...


    By Rotork

  • UNTHA reveals third generation waste shredder

    Global shredding giant UNTHA has launched its 3rd series XR waste shredder, following more than 10 years at the forefront of this progressive industry. The UNTHA XRwas first brought to market as a robust pre-shredder that could effectively process a myriad of municipal, commercial and industrial wastes in readiness for the alternative fuel production market. But committed to ...


    By UNTHA UK LTD

  • Now even more quality shredders with a bite at the LIGNA 2017

    From May 22 to 26, 2017 the LIGNA in Hanover is once again the meeting point for the wood working and processing industry. Themed "Now even more quality shredders with a bite", UNTHA shredding technology will present its tried and tested wood shredders as well as the new QR class in hall 13, at booth D34. The Austrian shredding specialist from Salzburg will exhibit a large selection of ...


    By UNTHA Shredding Technology

  • Recofloor names 2017 vinyl flooring recycling award winners

    Recofloor, the UK’s vinyl flooring take-back scheme, celebrated the environmental commitment of its recycling champions at its sixth Annual Awards Event at London’s world-famous Kia Oval cricket ground in March. Flooring companies, contractors and distributors received trophies and certificates in ten ...

  • First Wind-Powered Recycling Robots in Malmö

    ZenRobotics Ltd. has delivered a ZenRobotics Recycler waste sorting system to its customer Carl F in Malmoe, Sweden. The wind-powered robotic sorting line has been operational since February and is the first of its kind in Sweden. The investment in robotic sorting technology is expected to increase the recovery with 12 000 tons annually. Carl F, based in Malmö, is a ...


    By ZenRobotics Ltd.

  • International Automobile Recycling Congress IARC 2017:New trends in automobile recycling

    Again this year, leading representatives of the international automobile recycling industry came together in Berlin for the 17th International Automobile Recycling Congress IARC 2017. From March 22 to 24, around 200 attendees and 20 exhibitors from 22 different countries assembled in the German capital for this key event. The congress again had a wide-ranging programme in store for its visitors ...

  • Assistance in the salvage of clean air with Herts Essex Recycling

    Filtrex Global provides products and systems that are energy efficient, and ensure that installations are adequately maintained to prevent environmental issues. HVAC systems with clogged filters decrease air flow, causing the systems to work harder, which in turn increases energy consumption.  The same goes for the condition of ducting; if ducts along with coils and filters are ...


    By Filtrex Global Limited

  • We’ve teamed up with NHS Trust Leeds to push sustainability in hospitals

    We’re working closely with Leeds Teaching Hospitals NHS Trust to reduce the carbon footprint of hospitals around Leeds, and save money through steps such as improving recycling and saving energy. We were in the Gledhow Wing at St James’s Hospital last week supporting the Estates team with their NHS ...


    By Wybone Ltd

  • Register Now for the 2017 APR Plastics Recycling Educational Webinar Series

    As The Voice of Plastics Recycling®, APR consistently seeks to recognize and promote innovations that enhance the recyclability of a new or existing package or container. APR promotes the long-term growth and development of plastics recycling by providing the leadership and tools necessary to support the sustainability of the industry. Innovation drives the growth of recycling, and is ...

  • We helped recycling at Marwell Zoo become more relephant

    We manufactured bespoke Mini Cyclo Dual Recycling Bins for Marwell Zoo in Winchester, with the added feature of a tray stacking area on the top of the unit. Manufactured from glass fibre composite, our Mini Cyclo bins are hardwearing and durable, and ...


    By Hansford Sensors

  • Recofloor: Recycling vinyl flooring saves money

    Flooring companies that recycle their waste vinyl flooring through Recofloor can save up to 70% on disposal costs when compared to sending offcuts or uplifted material to landfill. Since Polyflor and Altro founded their national waste vinyl flooring recycling scheme in 2009, more than 700 collectors across the UK and Ireland are now benefiting from this sustainable alternative disposal route. ...

  • Register Now for the 2017 APR Plastics Recycling Educational Webinar Series

    As The Voice of Plastics Recycling®, APR consistently seeks to recognize and promote innovations that enhance the recyclability of a new or existing package or container. APR promotes the long-term growth and development of plastics recycling by providing the leadership and tools necessary to support the sustainability of the industry. Innovation drives the growth of recycling, and is ...

  • Can You Hear Me? Communicating With Your Supply Chain Through the Noise

    Data — it is the word that resonates most when discussing the supply chain with my clients. Do you have a point regulatory requirement like REACH or anti-human trafficking? Data helps you comply. Does your company have a Supplier Code of Conduct (SCOC) that is linked to your values, and those of your suppliers? Data conveys those values. Is there a big change at your ...


    By Assent Compliance Inc.

  • Presona and Stadler in North America

    Colfax, North Carolina-based Stadler America LLC has finalized exclusive representation in North America for the Presona line of balers designed and manufactured by Presona AB of Tomelilla, Sweden. “We are excited about this opportunity,” says Mat Everhart, CEO of Stadler America. “Presona manufactures a fabulous baler. Being able to ...


    By Presona AB

Need help finding the right suppliers? Try XPRT Sourcing. Let the XPRTs do the work for you