Channel Balers Equipment For Waste And Recycling Available In West Virginia
-
Manufactured by HSM GmbH + Co. KGbased in GERMANY
For industrial applications with small to medium material loads. Suitable for continuous loading. Variety of uses. Suitable for many different materials. Operating side can be selected. Control of compression cycle via light barrier. Compact bale dimensions. Low space requirement. Available as an option with manual ...
-
Manufactured by HSM GmbH + Co. KGbased in GERMANY
With this waste disposal station, HSM combines the FA 500.3 heavy duty document shredder with a channel baling press. It is therefore perfect for use in archives or central stations for shredding large quantities of documents, which are then compressed into bales of up to 90 ...
-
Manufactured by HSM GmbH + Co. KGbased in GERMANY
Implementation of special solutions. HSM does not just offer hardware alone, but provides individual system solutions as well. When it comes to demanding systems, you can benefit from our extensive know-how and broad experience. Experienced HSM specialists assist you right from the start on site and provide ongoing support and service. With the wide range of options and accessories, our disposal ...
-
Manufactured by HSM GmbH + Co. KGbased in GERMANY
Fully automatic channel baling press with a throughput of up to approx. 268 m³ per hour (theoretically). Suitable for compressing paper, cardboard, punchings and shredded material, foil and much more. Versatile use in industry, manufacturing and retail (processing industry, printing, paper industry, department stores, wholesalers, central warehouses, distribution centres). Produces bales ...
-
Manufactured by Macpresse Europa S.R.Lbased in ITALY
The L series balers are designed and built to compact municipal solid waste, RDF and in general all recyclable materials. The MACPRESSE L series is characterized by high output efficiency thanks to the compression cycle speed and cutting efficiency of the materials exceeding the size of the compacting chamber. The MAC 108L/1 baler is the smallest of the MACPRESSE “L” series models. ...
-
Manufactured by Anis Trend d.o.o.based in SLOVENIA
The feeding hopper can be lengthened or shortened depending on the intended use or the size of the pieces of material. Each above-mentioned baler includes a mounted cylinder to either increase or decrease the compression force. Based on that fact, we can offer you three heavy-duty methods of manufacture. Engine power or the number of mounted engines is dependent on the required ...
-
Manufactured by HSM GmbH + Co. KGbased in GERMANY
HSM does not just offer hardware alone, but provides individual system solutions as well. When it comes to demanding systems, you can benefit from our extensive know-how and broad experience. Experienced HSM specialists assist you right from the start on site and provide ongoing support and service. With the wide range of options and accessories, our disposal solution can be fully integrated into ...
-
Manufactured by HSM GmbH + Co. KGbased in GERMANY
For industrial applications with small to medium material loads. Suitable for continuous loading. Variety of uses. Suitable for many different materials. Operating side can be selected. Control of compression cycle via light barrier. Compact bale dimensions. Low space requirement. Available as an option with manual ...
-
Manufactured by HSM GmbH + Co. KGbased in GERMANY
For industrial applications with small to medium material loads: Suitable for continuous loading: Variety of uses: Suitable for many different materials: Operating side can be selected: Control of compression cycle via light barrier: Compact bale dimensions: Low space requirement: Available as an option with manual ...
-
Manufactured by Europress Umwelttechnikbased in GERMANY
As a hook lift mobile solution, the mobile channel baler has a hook lift mount and can be lifted onto suitable vehicles with appropriate systems. The local independence enables safe and reliable operation in the field, e.g. on landfills. Both wire and twine binding are possible to tie the compressed material ...
-
Manufactured by Europress Umwelttechnikbased in GERMANY
Stay flexible: With our hook-lift mobile chain belt conveyor you can fill your plants anytime and anywhere. This conveyor can be ideally combined with our hook lift mobile channel ...
-
Manufactured by Kadant PAAL Holding GmbHbased in GERMANY
Kadant PAAL’s range of PACOMAT channel baling presses, which is offered with either vertical or horizontal wire tying, is the ideal baler for most grades of paper, cardboard, cartons, foils, and many other materials. The PACOMAT range of balers is robust and fully automatic yet the PACOMAT is also an affordable and cost-effective baler ...
-
Manufactured by Valvanbased in BELGIUM
Used often in natural fiber baling (Flax, Hemp, Kenaf, coconut fibres ) and waste fiber baling (trim waste, yarns, waste textiles and recovered fibres). Also suited for baling limited capacities of recyclables such as plastics , cardboard or ...
-
Manufactured by OBM Machines B.V.based in NETHERLANDS
Baler Paal, type Impress D225-165-D-5V/5H-1.6, pressing force 21 t, yoc 2022, only 1,486 operating hours, drive power 3 x 45kW, 10-fold cross tying ...
-
Manufactured by HSM GmbH + Co. KGbased in GERMANY
For industrial applications with small to medium material loads. Suitable for continuous loading. Variety of uses. Suitable for many different materials. Operating side can be selected. Control of compression cycle via light barrier. Compact bale dimensions. Low space requirement. Available as an option with manual ...
-
Manufactured by Macpresse Europa S.R.Lbased in ITALY
The MAC 110/1 series has been appropriately designed to bale large quantities of recyclable materials. Thanks to its great work flexibility this model can bale all types of waste paper, plastic containers, aluminium cans, food tins and many more recyclable ...
-
Manufactured by HSM GmbH + Co. KGbased in GERMANY
For industrial applications with medium material loads, e.g. processing industry, department stores, document shredding facilities, printing and paper industry. Suitable for applications with a throughput rate up to approx. 244 m³ / hour. Versatile solution for materials up to approx. 50 kg/m³ bulk weight. Particularly suitable for compression of paper, cardboard and foils. With large ...
-
Manufactured by HSM GmbH + Co. KGbased in GERMANY
For industrial applications with medium material loads, e.g. processing industry, department stores, document shredding facilities, printing and paper industry. Suitable for applications with a throughput rate up to approx. 214 m³ / hour. Low price solution for light goods up to approx. 40 kg/m³ bulk weight. Particularly suitable for compressing lighter cardboard. Large loading aperture ...
-
Manufactured by HSM GmbH + Co. KGbased in GERMANY
For professional disposal management or major industrial applications, e.g. processing industry, disposal companies, PET bottles / UBC disposal, department stores, document shredding facilities, printing and paper ...
-
Manufactured by HSM GmbH + Co. KGbased in GERMANY
For industrial applications with small to medium material loads: Suitable for continuous loading. Variety of uses. Suitable for many different materials. Operating side can be selected. Control of compression cycle via light barrier. Compact bale dimensions. Low space requirement. Available as an option with manual ...
Need help finding the right suppliers? Try XPRT Sourcing. Let the XPRTs do the work for you