Chipping Equipment Articles

  • From a 1m3 cubitainer to 50mm chips, using a two-shaft shredder? With SatrindTec, “Sí, es posible!”

    A Spanish manufacturer of HPDE cubitainers and containers based in Cataluña has chosen SatrindTech to implement its recycling line of defective cubitainers. The request received by our Sales Department was to replace an existing SatrindTech twin-shaft shredder, in use since the mid-1990s, to now be able to ensure a regular size of the shredded material. ...


    By SatrindTech Srl

  • Cold Weather Maintenance

    Brrrrr! It’s cold out there! In severely cold weather, it is important to remember that your equipment maintenance regime should be even more vigilant. Some special attention is needed for machines that are actually used during these cold months. Your lawn mower, brush cutter, and wood chipper will likely be fine sitting in the shed all winter, but machines such as snow blowers will ...


    By DR Power Equipment

  • Next Generation: Phosphor Coatings

    Reducing the Cost of LED Fixtures with Next Generation Phosphors There are two main methods through which LEDs can produce white light. One method is to use red, green and blue diodes so that their combined output appears white to the human eye. However, the limitation of this approach is that it requires three types of LEDs, and heat dissipation becomes an issue when they are assembled ...


    By Global Energy & Lighting

  • Raw material cycle: from chip to briquette to product - Case Study

    Thanks to their briquetting system from RUF Frischhut can redeploy production scrap and melt it again Ludwig Frischhut GmbH and Co. KG have closed the circle on their raw material cycle by utilising a briquetting press from RUF: cast chips produced during the machining of parts for water supply and sewage disposal are pressed to solid briquettes and then melted in the in-house foundry and ...

  • Making environmentally friendly fuel from wood chips - Case Study

    The RUF briquetting press earns the Ortinger company additional profits During the production of round bars or rods for flags, skewers and many more products made from wooden planks, lots of wood chips are accumulated. Instead of disposing of them as waste, the wood processor Ortinger presses them into briquettes, which they then sell as fuel. This way they can economically support ...

  • 5 Essential Wood Chipper Safety Tips

    If you use a wood chipper around your property, then you know what powerful machines they are. For cleaning up brush piles and making valuable wood chip mulch, using a wood chipper is often the easiest and most effective method. But with great power comes great responsibility. In this case, it is your responsibility to stay safe when using your wood chipper. Here are some easy ways to prevent ...


    By DR Power Equipment

  • CHIP-tuning for biological wastewater treatment plants

    The demand for efficiency improvement in municipal and industrial wastewater treatment plants (WWTP’s) is increasingly based on problems related to the water quality, process stability and/or insufficient performance in the COD removal and/or nitrification process. New, stricter requirements or the need for higher removal efficiency intensify the demand for optimizing the existing ...


    By Multi Umwelttechnologie AG

  • Bio Cabin Case Study

    Site background: As a result of a previously successful planning application on one of their other farms, The Hampton Estate management team agreed that biomass was the preferred fuel for this new project. The project was to build new housing including the conversion of an existing barn on the estate. Description of problem before installation: New heating system to ...


    By Ashwell Biomass Ltd

  • Shredding of end-of-life tyres (ELTs): a ´black gold mine´ ready for being exploited

    “Problems can't be solved by using the same kind of thinking we used when we created them" (Albert Einstein). The 2014 report by the ETRMA (European Tyre and Rubber Manufactures’ Association Sustainable Development Foundation) shows that only considering consumer, light truck, truck, motorcycle and agriculture tyres, in 2012 Germany, UK, France, Italy and Spain had been able ...


    By SatrindTech Srl

  • The Crunch Factor – Corn Chip Edition

    Friday, January 29 was National Corn Chip Day. To celebrate, we took a closer look at this wonder of the snack world and are sharing the important role that moisture plays in the production of corn chips and snack foods in general. To get the scoop on corn chips, we spoke to Randy Rupprecht, QA Manager, and Mike Klein, Processing Manager, of Axium Foods. ...


    By Arizona Instrument LLC

  • Mesquite wood chips (Prosopis) as filter media in a biofilter system for municipal wastewater treatment

    The biofiltration system over organic bed (BFOB) uses organic filter material (OFM) to treat municipal wastewater (MWW). This study evaluated the performance of a BFOB system employing mesquite wood chips (Prosopis) as OFM. It also evaluated the effect of hydraulic loading rates (HLRs) in order to achieve the operational parameters required to remove organic matter, suspended material, and ...


    By IWA Publishing

  • small potato chips plant

    Semi-automatic potato crisps line in low price is specially designed for small and medium scale potato chips manufacturers. We offer three different models(30 kg/h, 60 kg/h, 150 kg/h) for various potato chips sellers. Semi-automatic potato chips line can be applied in grocery, retail store, supper market, restaurant, etc. Semi-automatic potato chips processing line has the similar functions as ...


  • Compressed and free of cooling lubricant - Case Study

    RUF’s briquetting press increases the efficiency of Zollner’s aluminium production Zollner AG compresses more than 100 tons of aluminium chips per year using a RUF briquetting press. The mechatronics service provider thereby reduces the volume of this recyclable material to a fraction and isolates clinging oils and emulsions. By recovering cooling lubricant and thanks to ...

  • Eco-friendly Caribbean Rum case study

    The St. Nicholas Abbey Plantation in Barbados can look back on more than 350 years of history. The method of rum production has not veered from tradition. The process has, however, become more eco-friendly - the boilers being used in the distillery are no longer run with oil but with eco-friendly palm briquettes. Larry Warren, whose family assumed responsibility for the 400-acre plantation in ...


    By WEIMA

  • Highly recommended case study

    Füllgraf GmbH & Co. Möbelwerkstätten und Küchenstudio KG with its registered office in Bad Arolsen is self sufficient – at least when it comes to heating its production hall and the adjacent exhibition rooms together with the administrative offices. The company with its over 60 years of history uses the WL 4 single-shaft shredder from WEIMA Maschinenbau GmbH of ...


    By WEIMA

  • Removal of As from groundwater by in situ bioprecipitation and zero-valent iron

    The aim of this study was to evaluate the in situ bioprecipitation (ISBP) and zero-valent iron (ZVI) for removal of arsenic from groundwater. Batch experiments were set up to test the metal/oxyanion removal efficiency using the processes induced by ZVI, by ISBP and by combining both technologies. For the construction of microcosms in anaerobic condition, aquifer material was mixed with ...


    By IWA Publishing

  • Aura leisure centre - Youghal - case study

    Key Facts Boiler Type: UTSK Size: 360kW Fuel: Wood Chip Imperative Energy Ltd examined the new Leisure Centre at Youghal in 2008 / 2009 with a view to installing biomass heating systems to compliment the existing oil-fired systems. The traditional approach to providing for domestic central heating and hot water in a centre such as ...


    By Imperative Energy Ltd (IEL)

  • Pulp & Paper Mill #2

    Problem: This company manufactures box board, chip and manila line. It furnishes recycled paper (box, cardboard and newsprint) and it operates 335 days/year on a one-cylinder machine. The DAF was not meeting sewer requirements and posed a maintenance problem. The effluent water could not be recycled. Solution: Hydrocal installed a CAF-100 unit to ...


    By HydroCal Inc.

  • Electrical contacts to single nanowires: a scalable method allowing multiple devices on a chip. Application to a single nanowire radial p–i–n junction

    Semiconductor nanowires are currently at the forefront of research in the areas of nanoelectronics and energy conversion. In all these studies, realising electrical contacts and statistically relevant measurements is a key issue. We propose a method that enables to contact hundreds of nanowires on a single wafer in an extremely fast electron beam lithography session. The method is applied to ...


    By Inderscience Publishers

  • Thermal management of micro hotspots in electric components with carbon nanotubes

    The excellent thermal and electrical conductivity as well as the remarkable mechanical properties of Carbon Nanotubes (CNTs) all point towards an unbeatable and facile route towards replacing traditional thermal management materials, like copper, in the electronics industry. In spite of that, the technology is still suffering from considerable challenges. In order to realise an actual ...


    By Inderscience Publishers

Need help finding the right suppliers? Try XPRT Sourcing. Let the XPRTs do the work for you