Only show results available in Texas? Ok

Combustion Waste services for Waste and Recycling

  • Premium

    Waste Management Services

    Over the past 10 years, Inciner8 have been busy developing new product ranges that utilise the latest in technological advances in waste management and combustion technology. Disposing of waste in an environmentally-friendly manner should be high of any company’s agenda. Using an array of thermal treatment solutions, we can work alongside ...

    By Inciner8 Limited based in Southport, UNITED KINGDOM.

  • Premium

    Hazardous Releases Services

    The modelling of hazardous releases can be required for emergency situations, such as a liquid spill, catastrophic failure of a tank or rupture of a pipeline. Toxic or flammable substances, such as ammonia, chlorine and Liquid Natural Gas (LNG), are often considered.

    By Cambridge Environmental Research Consultants (CERC) based in Cambridge, UNITED KINGDOM. from Environmental Consultancy Service line

  • Analytical Chemistry

    Tradebe Inutec provides a comprehensive analytical chemistry service encompassing radionuclide, chemical and physical analysis. Inutec has extensive experience in the analysis of a diverse range of materials, from seafood, soil, waters, liquid effluents, “soft” wastes, to the characterisation of the nuclear inventory of fuel ...

    By Inutec based in Dorchester, UNITED KINGDOM. from Waste Sampling & Characterisation Service line

  • Proprietary Recycling Process Services

    It takes approximately 95% less energy to produce secondary aluminium, via recycling operations, than is otherwise consumed when producing primary aluminium from bauxite. This is one of the main reasons why recycled aluminium is so valuable and environmentally friendly.

    By Enval Limited based in Cambridge, UNITED KINGDOM.

  • Neutralization

    Perma-Fix Neutralization/Stabilization can be performed at all four of the Perma-Fix facilities. Due to the waste treatment approach of this section Perma-Fix is providing our treatment capabilities for neutralization followed by stabilization however in many cases combustion at our DSSI facility provides the most cost effective option. ...

    By Perma-Fix Environmental Services, Inc. based in Atlanta, GEORGIA (US) (USA). from Mixed Low Level Waste Treatment Service line

  • RDF from Combustible Wastes

    Hansol EME provides technology to produce RDF/RPF from selected combustible solide wastes through MBT(Mechanical Biological Treatment) system which sorts out organic and inorganic matters.

    By Hansol EME based in Gyeonggi-do, SOUTH KOREA.

  • Wirajasa - Industrial/Farm Waste Handling System

    Industrial or Farm Waste Handling System may involve compacting, baling, moisture reducing, storage, loading on truck or tanks and further utilization. Industries served include general industries, food and non food, pulp and paper, palm oil, agricultural product processing, power plant, mining, etc.Please contact Suhardiyoto Haryadi via email: ...

  • Hazardous Waste Management Services

    Mr. Cary Perket has over 30 years experience in hazardous waste management. Mr. Perket background includes regulatory positions with State of Minnesota and Wisconsin hazardous waste programs, consultant to manufacturers on hazardous waste management, management of superfund and other remediation projects, and the permitting of waste management ...

    By Envirobiz Group Inc. based in San Diego, CALIFORNIA (USA).

  • Energy from Waste and Biomass Services

    COWI provides multidisciplinary services for the environmentally sound thermal treatment of combustible waste at waste-to-energy plants and utilisation of the energy in waste and biomass. Waste is no longer something that simply has to be disposed of. It is becoming a useful and valuable energy resource. Our aim is therefore to provide a safe and ...

    By COWI A/S based in Kongens Lyngby, DENMARK. from Water and Environment - Solid Waste Management Services Service line

  • BS EN 14181 Testing Services

    BS EN 14181, Quality Assurance of Automated Measuring Systems, is a European Standard which applies to automated emissions monitoring instrumentation installed on large combustion plant or waste incineration. It covers the approval calibration, testing and performance monitoring of the measuring system.

    By CES Environmental Instruments Ltd based in Burton on Trent,, UNITED KINGDOM.

  • Emissions Monitoring Services

    ENVIROMETRICS is an accredited ISO/IEC 17025:2005 emission monitoring laboratory. State of the art sampling and emissions measuring systems, high standard personnel competency, experienced sampling team and deep understanding of industrial processes make ENVIROMETRICS the ideal choice for emission monitoring and industrial process testing ...

    By Envirometrics Ltd based in Athens, GREECE.

  • Pioneer Plus

    The eco/Tech Pioneer-Plus waste combustion technology is a rugged, small-scale, next-generation stepped hearth system based on operating experience at their resource recovery facilities in Pittsfield (since 1981) and the Pioneer Valley (since 1988). Energy Answers sold these facilities in October 2007 to Covanta Energy. 

    By EnergyAnswers Corporation based in Albany, NEW YORK (USA).

  • Research and Development Services

    Waste combustion on a grate is a technology that has been tried and tested for decades. However, there are always new challenges that necessitate further development and improvement. Some examples are: more stringent requirements with regard to limit values for emissions, the quality of the residues generated, a change in waste composition etc. ...

    By Martin GmbH für Umwelt- und Energietechnik based in München, GERMANY.

  • Hazardous Waste Incineration

    Hazardous Waste Incineration is used to describe those facilities which are specifically designed for the treatment of hazardous waste - these facilities are typically a rotary kiln design operating above 1100 degrees centrigrade with a highly specialised flue gas cleaning system. Where possible energy is recovered either for use in the process, ...

    By Eurits based in Mechelen, BELGIUM.

  • Flue Gas Cleaning

    The combustion of waste results in the production of a mixture of gases containing pollutants such as carbon dioxide, sulphur dioxide, dust and soot, as well as nitrogen oxides, heavy metal bearing fumes and unburned hydrocarbons. The pollutants can be removed from the flue gases by using the latest flue gas cleaning systems, so that harmful ...

    By EEW Energy from Waste GmbH based in GERMANY.

  • Echo/Tech - Sludge Recycling System

    eco/Tech developed an innovative technology to co-combust different types of sludge with municipal solid waste in combustion facilities. Sludge is the semi-solid waste material removed during the treatment of municipal wastewater or from certain manufacturing operations like paper mills and can present disposal concerns for communities and ...

    By EnergyAnswers Corporation based in Albany, NEW YORK (USA).

  • PER Process Services

    PER Plant extracts recycled oil by completely melting waste material and condensing produced gas with the application of indirect heat to waste material input.

    By PER North America, LLC. based in Duluth, GEORGIA (US) (USA).

  • Principles of Waste Incineration

    Waste incineration is the thermal oxidation of combustible matter with oxygen (from air) at sufficient temperatures to ignite the waste. The combustion design also generates heat sufficient to destroy volatile contaminants in the hot gases before being emitted through the stack. Cyclonator incinerators can be modified to recover ...

    By Westland Environmental based in Edmonton, ALBERTA (CANADA). from Waste Management Service line

  • Waste Incineration

    This technology extends the life of landfill through the incineration of combustible solid wastes. Stoker and Fluidized bed Combustion(FBC) are well known as the one of incineration types.

    By Hansol EME based in Gyeonggi-do, SOUTH KOREA.

  • Installation and Commissioning

    ABB's professional installation and commissioning services ensure that you get the best out of your investment, protecting reliability and reducing downtime risk.

    By ABB Measurement Products based in Zurich, SWITZERLAND.

Need help finding the right suppliers? Try XPRT Sourcing. Let the XPRTs do the work for you