Construction Waste Equipment For Waste And Recycling In Latin America
-
PremiumManufactured by ENVEAbased in FRANCE
Microwave sensor for continuous moisture measurement in dry bulk solids, with flow detection and process temperature ...
-
PremiumManufactured by ENVEAbased in FRANCE
Microwave sensor for continuous moisture measurement in dry bulk solids. Sensors for continuous moisture measurement and installation on conveyor belts, screw feeder or hoppers. Two types of sensor-technology to cover a wide range of applications. Both sensors penetrate the product for most reliable measurements. ...
-
PremiumManufactured by Tana Oybased in FINLAND
The legendary TANA 440 Shark shredder now has a little brother: the TANA 220DTeco. The TANA Shark is well known as the most versatile mobile waste shredder with excellent capacity and productivity. A robust machine is built to last and maximize uptime. The new TANA 220DTeco is mechanically similar to the TANA 440 shredder, except it is powered by a single hydraulic motor. Whereas the TANA 440DT ...
-
PremiumManufactured by Tana Oybased in FINLAND
TANA 440Deco industrial waste shredder offers unrivalled versatility with the ability to shred a wide range of difficult materials, such as mattresses, tyres, cables, ragger wire, municipal solid waste (MSW), and construction and demolition waste. This makes it possible to recover valuable materials and reduce waste volumes at the same ...
-
PremiumManufactured by ENVEAbased in FRANCE
Sensor for continuous moisture measurement in dry bulk ...
-
Manufactured by Arjes GmbHbased in GERMANY
The TITAN class is all about the heaviest chunks and the most demanding applications. Where many throw in the towel, we take on the challenge and seek to satisfy with a competitively superior range of applications. Especially companies that have to process a huge amount of waste products on a daily basis find themselves at home within this price ...
-
Manufactured by Komptech GmbHbased in AUSTRIA
The Metalfex adds a mobile non-ferrous metal separator to the Komptech line. Designed for conveyor feed, the Metalfex has its own intake conveyor and an overhead ferrous separator upstream of non-ferrous separation. It removes non-ferrous metals using an eddy current separator with eccentric pole system, discharging the metals and the cleaned fraction by two folding conveyors to the left and ...
-
Manufactured by HENNLICH ENGINEERINGbased in CZECH REPUBLIC
The Pacific line is a high-pressure system that sprays water or water with chemicals, though nozzles to create a fine atomised mist. The system operates with either mains or generator supplied power (240V/415V) and mains supplied potable water. ...
-
Manufactured by Arjes GmbHbased in GERMANY
Alternatively, the ARJES heavy-duty class also offers the possibility of using a stationary electric or diesel version, in which the twin-shaft shredders convinces with maximum efficiency. The system is divided into a drive and control unit and can be integrated into existing recycling plants or used as a stand-alone ...
-
Manufactured by Bulk Handling Systems (BHS)based in USA
The fully-redesigned Nihot SDS i-Series is a semi-mobile, Plugand-Play air separator using industry-leading negative pressure technology to sort a wide range of material by density. The new SDS i-Series improves on its highly-successful predecessor with increased performance and adjustability, a compact footprint and robust components. The fully-assembled unit fits in a semi-trailer or in a 40' ...
-
Manufactured by MB Crusherbased in ITALY
Designed with our constructive approach towards reducing waste and increasing the profitability of the construction site, this machine is the latest “gem.” Designed and produced by an Italian company famous all over the world: what’s new about the MB-HDS Shafts Screener is its ability to adapt to a wide range of job sites and varied types of materials. It is the ideal solution ...
-
Manufactured by MB Dustcontrol B.V.based in NETHERLANDS
The SprayCannon 10 is especially designed to cover both small indoor- and outdoor areas where dust and odour suppression is required. The machine is perfectly suitable for small demolition, recycling and construction applications, also it can be successfully used at asbestos removal sites. Since the machine is very compact and light, it is very easy to manouvre and lift. Due to the Frequency ...
-
Manufactured by Eggersmann GmbHbased in GERMANY
The Trommel screening machine T4 is the most powerful screening machine in the compact class. Terra Select has compressed the technical advantages of the larger machines and transferred them to the T4. So you can find in the T4, the special hopper drive, a large diesel engine, galvanized conveyor frames, wide transfer points and conveyor belts. These features and the Trommel diameter of 1.600 mm ...
-
Manufactured by Arjes GmbHbased in GERMANY
Alternatively, the ARJES heavy-duty class also offers the possibility of using a stationary electric or diesel version, in which the twin-shaft shredders convinces with maximum efficiency. The system is divided into a drive and control unit and can be integrated into existing recycling plants or used as a stand-alone ...
-
Manufactured by Arjes GmbHbased in GERMANY
The TITAN class is all about the heaviest chunks and the most demanding applications. Where many throw in the towel, we take on the challenge and seek to satisfy with a competitively superior range of applications. Especially companies that have to process a huge amount of waste products on a daily basis find themselves at home within this price ...
-
Manufactured by Bulk Handling Systems (BHS)based in USA
The BHS Debris Roll Screen is the industry’s flagship disc screen. This proven, patented technology is the premiere sizing tool for single stream, Municipal Solid Waste (MSW), Construction and Demolition (C&D) waste, wood waste, compost, green waste, plastics, glass, tires and other miscellaneous ...
-
Manufactured by Casellabased in UNITED KINGDOM
For site operators and managers who need to monitor the dust levels within their site, inside or outside, or at the boundary, the Casella Dust Detective is the ideal tool for survey measurements. It comprises of the Microdust Pro, a real time, logging dust monitor and a personal sampling pump all housed in a rugged casing to IP65. This means that you can use the Dust Detective both indoors and ...
-
Manufactured by Arjes GmbHbased in GERMANY
The stationary electric version of our compacts twin-shaft shredder is convincing in particularly difficult areas of application due to its high efficiency and low maintenance costs. The two shredder components, shredding unit and control unit, can easily be integrated into existing recycling plants or used as an invidual ...
-
Manufactured by Sensor, spol. s r.o.based in SLOVAKIA
The LID method avoids all of the issues of historical leak detection and location techniques by avoiding all traditional parameters and instead directly measuring for leakage in the electrophysical properties of the ground around the ...
-
Manufactured by Arjes GmbHbased in GERMANY
Upholding the motto ”never change a running system“, for the mobile compact class we are offering proven ARJES technology with a field-tested and competitive design. The COMPAKTOR 300 has a new name, but when it comes to its structure, it is not a blank sheet on the global recycling market. Especially disposal companies of the construction and demolition sector value the ARJES brand ...
Need help finding the right suppliers? Try XPRT Sourcing. Let the XPRTs do the work for you