Container Liners Equipment For Waste And Recycling Near Australasia
-
PremiumManufactured by Royal Eijkelkampbased in NETHERLANDS
The split tube sampler is an apparatus for rapid undisturbed sampling at the surface. The apparatus is very suitable for research on root systems, fertilizing and soil biology. The set consists of a split tube sampler with a handle with beating head, hammer with nylon heads (shock-absorbing), sample liners, storage containers and a steel lifting jack with lever and chain. The split tube sampler ...
-
Manufactured by Australia Wide Lining (AWL)based in AUSTRALIA
Geosynthetic clay liners are factory manufactured liners containing a thin layer of bentonite clay. This is supported by geotextiles and/or geomembranes. It is held together by needling, stitching or may be physically bonded. GCL can be installed exclusively or as part of a lining system design in conjunction with a Geomembrane. ...
-
Manufactured by Weiss Umwelttechnik - Schunk Groupbased in GERMANY
Regulated humidity and negative temperatures within a test combined with corrosion place high demands on the design of the test chamber. The corrosion test chambers of weisstechnik® are equipped with a refrigeration circuit. The components of this are located in the test chamber and are corrosion resistant. Depending on the area of application and the requirements of the test, a choice can ...
-
Manufactured by DDShgSolutionsbased in USA
This UN tested and DOT approved 5 gallon kit is designed for the shipment of 3 to 4 of the chairside dental amalgam separators. The external dimensions of the 5 gallon pail are 11.97″ x 10.44″. Price includes container, liner, instructions, generator certification form, prepaid return shipping, recycling and ...
-
Manufactured by Soilmoisture Equipment Corp.based in USA
For rapid undisturbed sampling at depths to 40 cm (16.75 inch). The split sampler version makes it easy to perform effective core sampling by the virtue of easy opening split tubes. Often in core sampling with wet clay soils that tend to stick it makes the job almost impossible. By using the split tube sampler one can easily remove a soft sticky soil core. In addition it uses protective core ...
-
Manufactured by PacTec, Inc.based in USA
The TransLiner is a disposable polyethylene container liner with a revolutionary design that ensures a form fit every time. Our design positions the liner seals outside the container, providing exceptional leak protection to safely and securely transport solids and sludge wastes. The TransLiner may also be fitted to cover the load which aids in dust and odor ...
-
Manufactured by Solmaxbased in CANADA
Typically used in applications with large differential settlement or in areas with a high risk of stress crack occurrence, Solmax’s LLDPE Liner series is the ideal containment liner. With its high multi-axial and stress crack resistance properties, this series of geomembrane liners offers a great, cost effective solution to designers and operators. See one of our success stories with LLDPE ...
-
PremiumManufactured by CETCObased in USA
RESISTEX Geosynthetic Clay Liners are a polymer-modified bentonite GCL that are engineered to provide the highest level of chemical compatibility for hydraulic barrier performance in extremely aggressive leachate environments. Our RESISTEX family of GCLs offer compatibility with a wide range of pH, electrical conductivity, and ionic strengths that are common to mining liquids. CETCO recommends ...
-
Manufactured by China National Electronic Imp. & Exp. Anhui Corpbased in CHINA
This unit is one of our famous set which are special designed for ice cube packing. We already served many ice machine factory and provide this unit together for their customers. The full unit contain material elevator, liner head weighing system, vffs packing machine and output conveyor. PE film and laminated film are both ok according to your requirement, and the capacity could be 1-10kg. ...
-
Manufactured by Damei Kingmech Pumpbased in CHINA
Type WAD pump are cantilevered,horizontal,centrifugal slurry pumps.They are suitable for delivering low density slurries for metallurgical,mining,coal and building material departments.The shaft seal adopts both gland seal and centrifugal seal. Type WAD pumps operate in high speed with small volumes to save floor area.The frame plates have changeable,wear-resistant metal liners rubber liners and ...
-
Manufactured by Damei Kingmech Pumpbased in CHINA
Heavy abrasive duty pump are horizontal centrifugal slurry pump.They are suitable for delivering low density slurry for metallurgical,mining,coal and building material departments.The shaft seal adopts both gland seal and centrifugal seal. This kind of slurry pump operate in high speed with small volumes to save floor area.The frame plates have changeable,wear-resistant metal liners and rubber ...
-
Manufactured by Shijiazhuang Ruite Pump Co.,Ltd.based in CHINA
TAH Slurry Pumps are heavy duty horizontal slurry pumps designed to handle abrasive and high density slurries in mining and heavy industry. TAH slurry pumps are available in sizes ranging from 1 inch to 18 inch discharge and feature high efficiency performance capable of flow rates from 10.8 to 5400 m³/h and heads up to 125 meters for high head models. Such as metallurgical mill pulp ...
-
Manufactured by K K Enviro Tech Pvt Ltd.based in INDIA
Geomembranes are manufactured using high density polyethylene (HDPE). These are of various thicknesses and with either smooth or textured surfaces (for steeper slopes). The product is suitable for sealing landfill caps and base liners, secondary containment, potable water and non-toxic containment applications such as water conveyance structures, canals or ...
-
Manufactured by Graphite India Limited (GIL)based in INDIA
Graphite India Limited is the pioneer in the field of manufacturing of large diameter Glass Fiber Reinforced Plastic (GRP) pipes, pipeline liners by continuous process in India. This venture was started in 1989 with Technical and financial collaboration of Veroc technology AS, Norway which was then known as Flowtite AS. We have a state of art , totally computerized Plant with advance technology ...
-
Manufactured by Gulnar Plastics Pvt. Ltd.based in INDIA
JalCover 16 is a durable geomembrane designed for maximum strength and performance. JalCover is quickly becoming the popular choice for use in high strength durability applications. JalCover products are designed for use as heavy-duty liners and covers for various applications in oil fields, landfills, spill containments, remediation, trucks and railcars, ponds and pools. ...
-
Manufactured by Gulnar Plastics Pvt. Ltd.based in INDIA
Jalcover 12 is a durable geomembrane designed for maximum strength and performance. Jalcover is quickly becoming the popular choice for use in high strength durability applications. Jalcover products are designed for use as heavy-duty liners and covers for various applications in oil fields, landfills, spill containments, remediation, trucks and railcars, ponds and ...
-
Manufactured by Rishi FIBC Solutions Pvt Ltd.based in INDIA
Transporting and handling bags by the forklift is not just time-consuming, at times it turns wasteful with punctures and product contamination. Users are fast moving to the system of container liners, which provides fast modes of loading and unloading, cuts down labor costs, and holds up to 19,000 kgs of product. It reduces several ancillary costs involved in pallets, boxes, and bags, spillage ...
-
Manufactured by Rishi FIBC Solutions Pvt Ltd.based in INDIA
A Polyethylene (PE) container liner is essentially a packaging material used to create a barrier between the container carrying products that are to be shipped. These liners are effective for transporting materials like minerals, powders, seeds and food. As the name suggests, the material used to make these liners is polyethylene. They are designed from this material based on the requirements it ...
-
Manufactured by HCP Plastene Bulkpack Limitedbased in INDIA
The most popular and economical type of FIBC liner is a lay flat tube. The liner lacks any curves or spouts. The liner typically has an open end and a heat-sealed end. Similar to how a form-fitting liner is inserted and affixed to a bulk bag, lay flat liners can also be used. Lay-Flat polyethylene liners are available either pre-installed in the bag or in rolls. They are Gusseted, available in ...
-
Manufactured by HCP Plastene Bulkpack Limitedbased in INDIA
Form-fitting liners precisely match the shape of the FIBC’s body, down to the filling and discharge spouts. Form-fit liners enhance the functionality of the bags and shield the packaged goods from contamination during handling, storing, and transportation. Liner filling and discharge spouts can be manufactured specifically to the customer’s size requirements.Form fit liners reduce ...
Need help finding the right suppliers? Try XPRT Sourcing. Let the XPRTs do the work for you