Cutting Systems Articles

  • The ‘Swiss Army Knife’ of Mass Flow Controllers

    Did you ever wish your mass flow controller could do it all? You’re not alone. End users ranging from machine builders to laboratory researchers are often faced with the challenge of needing flow measurement and control equipment for a wide variety of applications. Many customers call the SmartTrak 100 mass flow ...


    By Sierra Instruments, Inc.

  • UNTHA optimises WtE production and metal recycling at Turkish paper mill

    An UNTHA shredder is now fully operational in Turkey’s first solid waste incineration plant. The single step XR3000C has transformed Modern Enerji’s approach to metal recycling, at the same time as boosting the production of ...


    By UNTHA Shredding Technology

  • Mexico’s first commercial waste to energy facility to supply alternative fuel under agreement

    Mexico’s first Waste to Energy plant is up and running in Hermosillo, Sonora. The facility began to take shape two years ago, when total waste management specialist ...


    By UNTHA Shredding Technology

  • UNTHA XR shredder boosts capacity of German SRF specialist

    One of the most experienced alternative fuel producers in Germany – Lober GmbH & Co. Abfallentsorgungs KG – has invested in the UNTHA XR3000C waste shredder to optimize its SRF plant. For three generations, Lober has successfully handled the waste disposal for municipalities and ...


    By UNTHA Shredding Technology

  • Stellio heliostat set to cut CSP tower costs by 20%

    A new heliostat modeled on South African data is using a pentagonal reflector design, innovative construction techniques and smart software to boost the cost efficiency of tower plants. Heliostat fields typically contribute about 50% of the capital investment for CSP tower plants, according to a study by SBP Sonne, the German engineering firm which has ...


    By FCBI Energy

  • Compliance on the Cutting Edge - Keep Your Company From Becoming an Expensive Lesson in Non-Compliance

    When your company is operating on the cutting edge of technology or seeking to establish a foothold in a new market created by modern technology, the mundane requirements of staying compliant to existing legislation can seem to be archaic and ...


    By Convergepoint

  • RDF production at Delete Oy with UNTHA shredders

    UNTHA’s complete RDF system strengthens Delete’s waste to energy commitment When environmental services specialist Delete needed a new alternative fuel production system for its site in Tampere, central Finland, the €100million turnover company turned to Austrian-based UNTHA. Now manufacturing more than 20 tonnes of 80mm RDF an hour, ...


    By UNTHA Shredding Technology

  • High Output of Quality Flavors Demands Efficient Grinding

    EAST HANOVER, NJ Vanilla beans from Madagascar, cinnamon bark from Sri Lanka, ginger roots from Nigeria and many other natural flavors you enjoy have likely come from Givaudan Flavors Corp. which extracts flavor from natural products, concentrates it, packages and markets it to food and beverage manufacturers. Givaudan processes natural ingredients on a mass scale, placing high demands on its ...

  • Turning metal wires from pulp bales into profit with TANA Shark

    Metal wires from paper pulp bales are high in value but very hard to shred and clean for selling purposes. Usually the metal wires are stuck with plastics and some remains of the pulping process. This particular type of waste is almost impossible to separate, says a landfill operator in France. Normally the only possibility to handle this type of waste is to dump it at a landfill. This is due ...


    By Tana Oy

  • Who pays? Who cuts emissions? 5 issues for UN climate deal

    World governments are hoping that this year will mark a breakthrough in the slow-paced U.N. climate talks. In Geneva this week, negotiators from more than 190 countries are working on a draft of a deal that's supposed to be adopted in Paris in December. At this point it's a wish list reflecting the diverging preferences of rich countries like the U.S. and Japan, major developing economies such as ...


    By Associated Press

  • Circular economy to be scrapped?

    Riverside Waste Machinery’s managing director Jonathan Oldfield, a passionate advocate of UK resource efficiency, talks about the current uncertainty surrounding the circular economy. There are a few things the waste and recycling industry knows for certain in 2015. New rules stipulating the separate collection of paper, plastics, metals and glass for recycling – where technically, ...


    By Riverside Waste Machinery

  • Even a Dragon can run like a Deere - Liquid Waste Technology launches a new Swinging Dragon dredge with John Deere power

    The new Swinging Dragon dredge from Ellicott Dredges/Liquid Waste Technology (LWT) boasts superior productivity when it comes to dredging marinas, canals, fly ash lagoons, and sand and gravel pits. It’s demanding work. That’s why LWT builds this heavy-duty floating monster with only proven and reliable components. John Deere engines, Funk pump drives, and a complete engine enclosure ...

  • Screen classifying cutters meet productivity needs of extrusion and thermoforming lines

    A major plastics thermoformer, whose operations include sheet extrusion and calendering, installed 20 screen classifying cutters from Munson Machinery Co. Inc., Utica, NY, to assure efficient granulation and sizing of its process scrap. It is essential that the cutters work to full ...

  • Start up of Indonesian Cinnamon Plant employs screen classifying cutter, rotary mixer

    Starting up a new process plant can be a tricky business for any company, but when it is the first plant the company has ever built and the location is halfway around the world from equipment suppliers, the project can be daunting. So it was with ForesTrade, Inc., when it set about building Indonesia's first state-of-the-art organic cinnamon-processing plant and an associated essential oils plant ...

  • `A real blockbuster`

    Recycling experts among themselves. Whenever UNTHA distributes invites to a live demonstration of one of its product innovations, industry experts are eager to accept. Most recently, attendees were bravely encouraged to: "Test the best!" The location: .A.S.A. Abfall Service AG in Himberg/Lower Austria; the focal point: The revolutionary new UNTHA Shredder ...


    By UNTHA Shredding Technology

  • Less fines improves productivity in waste wood shredding - Case Study

    A customer in France was shredding waste wood with two Doppstadts. After processing the wood twice, up to 20% of the total outcome was worthless fine wood dust. With TANA Shark the problem with the dust was eliminated and productivity of the process was improved respectively. Steady burning process in a heating unit requires pure wood particles ...


    By Tana Oy

  • For a clean Environment case study

    AmeyCespa is one of the leading providers of recycling, composting, anaerobic digestion and waste management services. The company combines the expertise of Amey, the UK’s leading public service provider, and Cespa, Spain’s major waste management company, which has over 40 years of expertise in the field. In Waterbeach, which is located only a few miles north of Cambridge (England), ...


    By WEIMA

  • Winning With Zero Waste

    In the business of professional and collegiate sports, with top priority on championships, player injuries, and filling stadium seats, attending a meeting with Martin Tull, Executive Director of the Green Sports Alliance (Alliance), seems like a walk in the ballpark. “When we speak to potential members, we often say, ‘Would you like to know how other teams are saving millions of ...


    By BioCycle Magazine

  • Sample preparation for the analysis of matured timber

    The matured timber statute dedicates itself with the utilization and application of matured timber. A perfect assistant for the sample preparation are the FRITSCH Cutting Mills.  It especially includes rules concerning analysis for the examination of matured timber in regards to heavy metals (lead, cadmium, chromium etc.), arsenic, as well as PCP and PCB (pentachlorophenol and ...


    By Fritsch Milling and Sizing

  • EU could cut emissions by 40 percent at moderate cost

    The costs of achieving a more ambitious EU climate target are estimated to be moderate. Upscaling greenhouse-gas emissions reduction from the current 20 percent by 2020 to 40 percent by 2030 would be likely to cost less than an additional 0.7 percent of economic activity. This is a key finding from an international multi-model analysis by the Stanford Energy Modeling Forum (EMF28) and comes at a ...

Need help finding the right suppliers? Try XPRT Sourcing. Let the XPRTs do the work for you