Demolition Waste Services For Waste And Recycling Available In Guyana
-
based in USA
Environmental, Health and Safety Compliance services for manufacturing, distribution, utilities, commercial/retail, airports, universities, landfills, and construction projects. KERAMIDA provides OSHA compliance and environmental compliance consulting for the management of hazardous waste, hazardous materials, toxic substances, stormwater, air emissions, water discharges, employee hazards, and ...
-
based in UNITED KINGDOM
Redefining Best practice in Environmental Noise Control - Think “Best Practicable Means” or “Best Available Technology” in environmental noise control and you will almost certainly end up with our award winning noise reduction technology instead of conventional high cost palliatives such as acoustic enclosures, barriers and ...
-
based in GERMANY
According to which waste code number should or may waste be classified? This is a crucial question when dealing with ways of waste disposal and the costs connected with it. The applicable waste code number is based on the Waste Catalogue Ordinance as well as other legal regulations and directives. Types of waste are classified by either origin, function, or substance, and thus their correct waste ...
-
based in USA
Contractors face many pollution risks stemming from operations at their job sites. These include contaminated soil disposal and the accidental release of fuel oil, chemicals and toxic gases from broken pipelines, utilities, and stationary and mobile fuel tanks. Contractors Pollution Liability insurance helps protect a wide range of pollution risks associated with construction ...
-
Manufactured by Geothermal Development Associates (GDA)based in USA
Shallow temperature surveys are a cost-effective tool that can identify and delineate geothermal outflow zones, prior to more expensive temperature gradient hole (TGH) drilling. Both the Geoprobe and 2-meter surveys can significantly reduce the cost of subsequent geophysics and TGH drilling by directing the exploration to a smaller area. The cost of both surveys together are normally less than ...
-
Manufactured by Karl Weiss Technologies GmbHbased in GERMANY
The company Karl Weiss Technologies GmbH is equipped to carry out all common types of pit shoring works with its own plant and staff. Furthermore, we have our own steel warehouse with a mobile crane, where we store various types of support girders and sheet piles so we can react quickly if they are needed. For more complex services we have equipment such as a lattice boom crane, pile drivers ...
-
based in USA
While R. Baker & Son is considered one of the top experts in the industrial dismantling industry we take pride in our ability to perform selective and total interior demolition projects. We are proficient in performing projects in any occupied or vacant environment, such as, office buildings, pharmaceutical plants, laboratories, manufacturing facilities and ...
-
by COWI A/Sbased in DENMARK
COWI provides services within waste collection, source separation, recycling, thermal treatment, biological treatment and recovery facilities. Coherent waste collection and treatment schemes are necessary if waste is not to become an ever-growing problem. The schemes must provide viable solutions that satisfy users' needs. COWI has taken part in developing the waste collection and treatment ...
-
by EDESSA Groupbased in LEBANON
Master plan Studies, Waste generation studies, Sorting and pre-treatment, Recycling and waste minimization, Waste treatment, Waste landfilling, Medical waste management, Industrial waste management, Construction and demolition (C&D) waste ...
-
based in USA
R.Baker & Son, a Service-Disabled Veteran-Owned Small Business (SDVOSB), provides nationwide wrecking and demolition services. With over 70 years of structural demolition, wrecking and dismantling experience, a highly-skilled and safe workforce, and a comprehensive range of modern equipment, R. Baker & Son is prepared to perform the demolition of one structure or an entire ...
-
based in USA
Bhate imploded the first-ever building on an Army installation (Ft. Myer) in the US in May 2007. More than 95% of the building materials were recycled from the demolition. Since then, Bhate has become one of the premier demolition contractors in the US. We currently hold four Facility Reduction Program contracts via the USAESC/Huntsville. As part of our demolition services, the abatement of ...
-
based in UNITED KINGDOM
EMR can help you turn your ferrous scrap metal into an income stream. We handle around 10 million tonnes of ferrous metal every year at our worldwide recycling centres, and pay extremely competitive prices. That's one of the reasons we have such long-standing relationships with our ...
-
based in UNITED KINGDOM
Globally EMR handles around 800,000 tonnes of non-ferrous metal every year and we buy all grades including aluminium, brass, cable, copper, lead, tin, titanium and stainless steel, to name but a few. We have long-standing relationships with our customers which is testament to the excellent service we provide based on competitive prices, honesty and efficiency. Whilst it will feel like you're ...
-
Manufactured by Picvisa Machine Vision Systems S.L.Ubased in SPAIN
The Test Center is available to any PICVISA customer to carry out their own ...
-
based in SINGAPORE
Mammoet offers clients tailor-made methods for the relocation and decommissioning of installations, with a specific focus on safety, cost-effectiveness, schedules and environmental impact. ...
-
based in UNITED KINGDOM
Pre-completion acoustic commissioning tests may be required to satisfy various project obligations, such as BREEAM, Building Regulations Part E for dwellings, hotels, schools or simply to demonstrate compliance with the client's specifications. Similarly, before a refurbishment project, it may be prudent to examine the acoustic performance of the existing building fabric. Or you may be the tenant ...
-
based in USA
Tidewater’s Construction Services Division provides GC / construction management, design-build, and construction / demolition services for civil and vertical and construction projects throughout the ...
-
based in USA
WESTON has performed a number of demolition and decommissioning projects for our clients over the past 45 years. These projects have included field surveys, sampling and analysis, dismantling/demolition designs, construction demolition phasing, recycle/reuse studies, and transportation and disposal cost ...
-
Distributed by 3Di Process Equipment Ltdbased in UNITED KINGDOM
You can access years of experience in the closure of manufacturing facilities, including demolition, dismantling, decontamination, rigging and site clearance. Our expertise has proved vital for clients wanting to close down their own facilities and dispose of surplus assets quickly and ...
-
by Arcadisbased in USA
Redundant, outdated and out-of-service facilities pose many challenges. To manage risk and drive down cost, owners need expert assistance with the deactivation, decommissioning, decontamination and demolition (D4) of these surplus ...
Need help finding the right suppliers? Try XPRT Sourcing. Let the XPRTs do the work for you