Domestic Waste Equipment For Waste And Recycling Available In Bahamas
-
PremiumManufactured by Enerpat Groupbased in CHINA
MSA-F Series Single Shaft Shredders are small to medium size reduction machines suitable for processing a wide range of materials to a uniform particle size. The products can often be sold as is, or be sent for further processing through additional equipment. Throughputs typically range between300kg/hr –5,000kg/hr+ depending on the model, material type and ...
-
PremiumManufactured by Presona ABbased in SWEDEN
The Presona pre-press technology baler is probably the most energy efficient baler on the market… When looking for a correct capacity baler, the most interesting comparison is the throughput capacity set in relation to the motorization of the baler. The figure to compare is the real volume capacity – the theoretical figures only say how much of “nothing” a baler can ...
-
PremiumManufactured by Bunting - Redditchbased in UNITED KINGDOM
The Electro Drum Magnet has stationary electromagnetic coils positioned inside a non-magnetic, commonly manganese steel shell, fitted with welded stainless-steel wiper bars. The shell rotates around the stationary electromagnetic coil at a speed determined by the volume of processed material. The electromagnetic coil, computer designed for maximum energy and induction efficiency, consists of a ...
-
PremiumManufactured by Presona ABbased in SWEDEN
If you want a baler that will perform with an optimized energy efficiency, choose the Presona baler. The correct capacity Presona baler to meet the customer’s requirements is always available. The Presona Baler Series consists of 6 basic models, the OH, EH, VH, CH, DH and XH. These letters refer to size of the feed opening. All models are available with either larger or doubled up motors ...
-
PremiumManufactured by Enviro Solutions Technology Co.,Ltdbased in CHINA
TDLAS is a laser-based technique that uses tunable lasers to measure the absorption of light at specific wavelengths, allowing the targeted measurement of HCl gas. FTIR spectroscopy is a technique that measures the absorption of infrared light, which means it can measure a wide range of compounds including HCl ...
-
PremiumManufactured by PHILOS Co. Ltd.based in SOUTH KOREA
Our advanced Membrane Bioreactor (MBR) Containerized System efficiently treats 50m3/day of wastewater, ensuring top-quality treated water and minimal environmental impact through fully automated operation, remote monitoring via SCADA, and odor and sludge removal ...
-
PremiumManufactured by Granutech-Saturn Systemsbased in USA
Solid waste and municipal solid waste (MSW) size reduction requires processing of many different materials, from filled drums to household waste. And, as the amount of solid waste increases and the cost of landfill management increases, it is becoming more critical that waste management become more effective, economic and efficient. Shredded and compacted waste is easier and cheaper to transport ...
-
PremiumManufactured by Enerpat Groupbased in CHINA
MSB-E Series Two Shafts Shredders are small to large size reduction machines suitable for processing a wide range of materials to a smaller size. The products can often be sold as is, or be sent for further processing through additional equipment. Throughout typically range between 300kg/hr – 20,000kg/hr+ depending on the model, material type and application. MSB-E Series Two Shafts ...
-
PremiumManufactured by Sebright Products, Inc.based in USA
Our CD-1-4-16 is the economical Hydraulic Cart Dumpers/Tipper made to lift moderate loads and carts up to 1 cubic yard. This dumper uses a 4-inch cylinder and heavy support frame to lift loads up to 48 ...
-
PremiumManufactured by Granutech-Saturn Systemsbased in USA
The disposal of hazardous waste requires special handling to ensure that safety and regulatory requirements are met. Preparing the waste for incineration or burial requires equipment that is durable and reliable so that the materials are processed safely and in accordance with the regulatory requirements. Granutech’s Saturn Shredders are custom-designed to handle hazardous waste materials ...
-
PremiumManufactured by Presona ABbased in SWEDEN
The DH and XH balers are all equipped with Presona’s unique two-step pre-press system. This system allows a feed opening of 2200 mm – all the way from the feed opening down to the bottom of the press chamber. The powerful XH balers with a combined press force of 210 tons, channel format 1100 x 1100 and a power pack of 2 x 75 kW can produce up to 50 tph or over 800 cbmh. These balers ...
-
PremiumManufactured by Enerpat Groupbased in CHINA
MSB-E Series Two Shafts Shredders are small to large size reduction machines suitable for processing a wide range of materials to a smaller size. The products can often be sold as is, or be sent for further processing through additional equipment. Throughout typically range between 300kg/hr – 20,000kg/hr+ depending on the model, material type and application. MSB-E Series Two Shafts ...
-
PremiumManufactured by Suzhou Jono Environmental Technology Co., Ltdbased in CHINA
The light intelligent sorting robot uses artificial intelligence technology and deep learning to perform highlevel abstraction of data using multiple processing layers(neural networks) that include complex structures or consist of multiple non-linear transformations. Establishing a special frame model according to the using characteristics. Through continuous sample collection, the target can be ...
-
PremiumManufactured by ENVEAbased in FRANCE
Continuous dioxin and furan emission monitoring by long-term sampling. TÜV and MCERTs certified, ETV EPA approved. The AMESA-D utilizes the water cooled probe method with Isokinetic sampling system coupled with XAD-II adsorbent cartridge for Long-term sampling of dioxins (PCDD), furans (PCDF) and other persistent organic contaminant (POPs). AMESA-D is the most utilized dioxin monitoring ...
-
PremiumManufactured by Suzhou Jono Environmental Technology Co., Ltdbased in CHINA
After-sales Service: Instruction for Commissioning and Maintenance. Warranty: 1 Year. Condition: New. Certification: ISO, CE, SGS. Automation: Automatic. Screw: Multi-Screw. Customization: ...
-
PremiumManufactured by Suzhou Jono Environmental Technology Co., Ltdbased in CHINA
JONO's unique patented disc screen, which has been used for more than five years in more than 100 cases, has proved to be very suitable for the screening of Asian's chaotic domestic waste. Compared with the traditional trommel screen, the flexible screen hole of disk screen has the function of self-cleaning. The unique transmission shaft greatly reduces the possibility of winding caused by long ...
-
PremiumManufactured by Sebright Products, Inc.based in USA
HPV Series Dumpers are designed for heavy loads from ground level and side dumping/tipping where differences in elevations exist. The two hydraulic cylinders are mounted vertically to provide a versatile dumper that can accept carts from the end or the side. These dumpers can lift up to an 84-inch elevation, available as a free-standing unit or anchored to other equipment for space saving. These ...
-
PremiumManufactured by Harden Machinery Ltd.based in CHINA
Harden large-scale hydraulic drive primary shredder is design for volume reduction of bulky waste and pre-treatment of solid waste, features powerful and stable operation and low maintenance cost. With functions of shearing, chopping, tearing and extrusion, the shredder can easily process a variety of waste such as untreated household wastes (MSW), decoration waste and industrial waste. Harden ...
-
PremiumManufactured by Fiberscope.net by Medit Inc.based in CANADA
The Trogloprobe-SL is a self-leveling push camera with a 1.9” diameter camera head and an industrial grade design suitable for tough environments. These units are manufactured in UK, using 30 years of experience and expertise to make them the best solution to inspect wet environments, since the camera head and push cable are IP68 waterproof and the reel, DVR box, and keyboard are also IP67. ...
-
PremiumManufactured by Suzhou Jono Environmental Technology Co., Ltdbased in CHINA
After-sales Service: Instruction for Commissioning and Maintenance. Warranty: 1 Year. Condition: New. Certification: ISO, CE, SGS. Automation: Automatic. Screw: Multi-Screw. Customization: ...
Need help finding the right suppliers? Try XPRT Sourcing. Let the XPRTs do the work for you