Only show results in Massachusetts? Ok

Drilling Waste Applications

  • Premium

    Drill Cuttings Plants For Oil and Gas Industry

    Common drilling procedures for oil and gas, used widely around the world, produce a consistently increasing amount drill cuttings containing oil. In some cases, drill cuttings even contain other hazardous components such as mercury or NORM (Natural occurring Radioactive Material), requiring special attention. Treatment of drill cuttings is therefore beneficial from both an environmental and an economic standpoint, allowing valuable drilling oil to be recovered, and ensuring environmentally sound disposal of the...

    By econ industries services GmbH based in Starnberg, GERMANY.

  • Premium

    Mercury Waste Plants for Oil & Gas Industry

    Mercury-contaminated wastes are a major challenge for many industries including the chlorine industry, oil & gas drilling, oil & gas refineries (catalysts) and fluorescent lamps recycling. Due to strict legal restrictions and HSE requirements, mercury-contaminated waste is required to be handled with special care. We at econ industries have the best solution for each specific mercury waste stream, with plants that are recognised as being state of the art from approval authorities worldwide.

    By econ industries services GmbH based in Starnberg, GERMANY.

  • Premium

    NORM Waste Plants for Oil and Gas Industry

    Natural Occurring Radioactive Material consists of materials enriched with radioactive elements found in the environment. They are usually brought to the surface by oil and gas exploration or mining. NORM wastes can be treated in a VacuDry® unit in order to prepare it for a safe sub earth disposal. Find more information, important key facts and the benefits of VacuDry® NORM waste plants on http://www.econindustries.com/applications/norm-waste

    By econ industries services GmbH based in Starnberg, GERMANY.

  • Premium

    Hazardous waste treatment solutions for oil and gas industry

    There are a wide amount of applications for our VacuDry® process within the oil and gas industry. A large variety of wastes and by-products that are generated in the oil & gas production chain can be treated effectively and sustainably. In past decades, numerous thermal desorption processes have been implemented worldwide, using a variety of heating chamber designs to separate hydrocarbons from the mineral solids. Such standard TDUs work under atmospheric pressure which can lead to safety risks, high...

    By econ industries services GmbH based in Starnberg, GERMANY.

  • Premium

    Oil Spill Eater II (OSE) for energy storage and fuel storage leaks

    The OSEI Corporation manufactures a first response bioremediation product Oil Spill Eater II that has been used to clean up leaks around storage tanks from valve breaks, line breaks and small holes in tanks, as well as for tank sludge clean outs. OSE II has been cleaning up oil/hydrocarbon based spills including heavy oils, sludge, drilling mud, tailings as well as refined product since 1989.

    By OSEI - Oil Spill Eater International, Corp based in Dallas, TEXAS (USA).

  • Premium

    Oil Spill Bioremediation

    The OSEI Corporation manufactures a first response bioremediation product Oil Spill Eater II that has been used to clean up leaks around storage tanks from valve breaks, line breaks and small holes in tanks, as well as for tank sludge clean outs. OSE II has been cleaning up oil/hydrocarbon based spills including heavy oils, sludge, drilling mud, tailings as well as refined product since 1989.

    By OSEI - Oil Spill Eater International, Corp based in Dallas, TEXAS (USA).

  • Premium

    Vertical Cuttings Dryers for Waste Solids Management

    In Elgin’s last White Paper, “Common Challenges Relative to the Use of Decanter Centrifuges for Barite Recovery in the Oil & Gas Industry,” a detailed discussion was offered about the complexities involved in achieving effective solids control when deploying a dual-centrifuge “barite recovery” system. As noted in that report, when centrifuges are properly used, centrifuges enhance the drilling fluid properties, thereby improving rig performance. By maintaining the target properties of the drilling fluid,...

    By Elgin Separation Solutions based in Stafford, TEXAS (USA).

  • Premium

    Electronic pressure measurement devices for oil and gas industry

    Scientists these days believe that the natural resources of oil and gas are not quite as finite as thus far assumed. These resources are likely to remain available considerably longer than hitherto predicted.

    By BD|Sensors GmbH based in Thierstein, GERMANY.

  • Premium

    Separation solutions for oil & gas industry

    Elgin Separation Solutions complete line of liquid / solid separation and dewatering equipment is fully compliant with all requirements for the oil & gas industry. Utilizing our closed loop technology project sites will be able to reclaim clean water and recovered drilling fluid that is cost effective and environmentally safe. Featuring shale shakers, decanter centrifuges, vertical cuttings dryers and dewatering systems.

    By Elgin Separation Solutions based in Stafford, TEXAS (USA).

  • Premium

    Separation solutions for dredging industry

    Dredging is the process of removing organic and/or inorganic sediment from the bottom of shallow water bodies in order to economically dispose of those sediments and/or have them repurposed for land farming or construction purposes. Elgin Separation Solutions manufactures effective solid recycling systems capable of handling high flow capacity. Elgin`s linear motion shakers have the largest screening surface area on the market. In addition, we have complete desilter and desander hydrocyclone manifolds incorporated...

    By Elgin Separation Solutions based in Stafford, TEXAS (USA).

  • Premium

    Separation solutions for constructions industry

    Today`s construction industry focuses a great deal on underground drilling and support systems. These processes typically use drilling fluid or slurry techniques. Packaged mud recycling systems are designed to minimize solids waste for disposal and effectively clean drilling fluid and slurry for active reuse. Foundation Drillers utilize drilling fluids for stability of holes during operation. Mud reclaimers process the used drilling fluid for continuous use downhole and creates less solids waste.

    By Elgin Separation Solutions based in Stafford, TEXAS (USA).

  • Premium

    Solids Control Centrifuges for Drilling Fluid Dewatering

    Saving Money, Time, and the Environment Through Chemistry A General Process Philosophy Description of Elgin’s Drilling Fluid Dewatering Systems. The drilling industry is regulated by a myriad of environmental regulations that protect our air, water, and land resources. As these regulations continue to evolve, so too must the technologies utilized by the drilling industry. Though lowering compliance costs is always a worthy initiative, incorporating technology that also enhances the drilling process by...

    By Elgin Separation Solutions based in Stafford, TEXAS (USA).

  • Premium

    Sub-ppm Oil in Water Testing

    InfraCal 2 is the newest addition to the worldwide-recognized Wilks InfraCal line of portable, filter-based infrared analyzers. It provides sub-ppm measurement capability, password protected calibrations and instrument settings, data storage and multiple calibrations, and a touch screen display for more user options. Ideal for measuring oil content levels in FRAC and produced water, fats, oil and grease (FOG) in wastewater, industrial and refinery wastewater effluents, cleaning of metal parats, drill cuttings,...

    By Spectro Scientific based in Chelmsford, MASSACHUSETTS (USA).

  • XRF analysis for metals exploration & mining

    Niton instruments offer unprecedented performance for a variety of mining and metals exploration applications, all in the palm of your hand. Examples include: Geo-Chemical Exploration. Metal exploration and assessment. Survey & Ore-Body Assessment. Mine Mapping, Development & Grade Control. Mill Heads & Tailings. Smelter Operations. Environmental Monitoring. Mining & Mineral Assessment.

    By Niton UK Limited based in Woodmancott, Winchester, UNITED KINGDOM.

  • Applications and Air Pollutants Removed in the Petroleum/Petrochemical Industry

    Scrubbing of Hydrogen sulfide, mercaptans and other organosulfur compounds from sour gas and other sources. Proprietary regenerative scrubbing chemistries for hydrogen sulfide removal with sulfur production. By-product production systems for producing sodium hydrosulfide (Nash) from hydrogen sulfide. Sulfur dioxide scrubbing. Recover catalyst dust from FCC units. HCL storage tank vent scrubbing. Removal of HCL and particulate from thermal oxidizers burning chlorinated plastics. Marine drilling platforms sulfur...

    By Bionomic Industries Inc. based in Mahwah, NEW JERSEY (USA).

  • Drill Cuttings Remediation

    With a Vulcan® Systems Thermal Desorption Unit, Hydrocarbons are separated from the solids in the sludge. The treated solids have little to no residual hydrocarbons, resulting in an end product that can be disposed of easily and cost-effectively. What makes our equipment unique? The ability to recover diesel or oil in a way which maximizes the resaleability of use as a fuel.

    By Vulcan Drying Systems based in Moberly, MISSOURI (USA).

  • Laser micromachining systems for drilling of fuel injector nozzles sector

    The fuel injector nozzle is critical to the performance of engines. Some of the important injector nozzle parameters are nozzle hole size and geometry. High quality holes of diameters less than 145 μm are required for the manufacture of diesel fuel injection nozzles for improved combustion efficiency and reduction of emission to the environment. The practice of using electro-discharge machining (EDM) drilling of fuel injection nozzles is limited in terms of the hole size it can produce effectively and the...

    By ELAS, Ltd. based in Vilnius, LITHUANIA.

  • Membrane for Oil and Gas Field Wastewater Treatment

    CNPC African Chad oil field wastewater treatment project 600 m³/day, using our SUPER DiscTube RO module. Classical and charateristics of oil and gas field wastewater:

    By Chengdu Meifute Membrane Technology Co.,Ltd. based in Jinniu District, Chengdu, CHINA.

  • Decanting centrifuges solutions for mining, tunneling & drilling fluids industries

    Mineral industry: Centrifuges are used all over the world to prepare mineral suspensions. Hiller decanters are ideally suited to hydrometallic processes, such the extraction of gold, silver or nickel. The processing of industrial minerals such as calcium carbonate, kaolin or titanium dioxide is also optimally carried out using Hiller technology. The dewatering and classification of mineral sludges is a complex issue, and requires special designs. Hiller high performance decanters have been developed and optimised...

    By Hiller GmbH based in Vilsbiburg, GERMANY.

  • StructureScan

    Cutting and coring experts and construction professionals require a reliable, non-destructive means to locate targets within concrete structures prior to drilling, cutting or coring. The industry’s widest range of concrete inspection antennas ensures that StructureScan is optimized for one`s particular application. StructureScan is the tool of choice of concrete professionals based on ease of use, field-proven durability, and accuracy for locating rebar, post-tension cables and conduits.

    By Geomorph Instruments based in Nicosia, CYPRUS.

Need help finding the right suppliers? Try XPRT Sourcing. Let the XPRTs do the work for you