drilling waste News
-
Project - Mexico
Project Description: The first ATDU designed and built for operations outside the US, this 84” diameter ATDU operated in Villahermosa, Mexico processing drilling waste at a rate of 8-10 tons per hour. The unit went into operation in the mid 1990’s. Material: Drilling Waste Composition: Solids Content: ±60% Oil Content: ±20% Water Content: ±20% Start Date: 1995 ...
-
Project - Oman 1 - PDO
Project Description: The 54" Diameter ATDU system is operated by Tradebe in the service of the PDO (Petroleum Development Oman). The unit is processing OBM drilling waste at a maximum rate of 5 metric tons per hour. The unit operates in parallel with a 66” diameter RLC ATDU. Material: OBM Drill Cuttings Composition: Solids Content: ±80% Oil Content: ±10% Water Content: ...
-
Project - Oman 2 - PDO
Project Description: The 66" Diameter ATDU system is operated by Tradebe in the service of the PDO (Petroleum Development Oman). The unit is processing OBM drilling waste at a maximum rate of 8 metric tons per hour. The unit operates in parallel with a 54” diameter RLC ATDU. Material: OBM Drill Cuttings Composition: Solids Content: ±80% Oil Content: ±10% Water Content: ...
-
EHS This Week: Minority Health Month, ICAO’s Safety Ratings, FDA Food Facility Regulations and More!
On this week’s edition of EHS This Week we’ve got the week’s top stories in environment, health and safety news: April Minority Health Month North Dakota Approves Project to Recycle Oil Drill Waste International Civil Aviation Association’s Safety Ratings Impact Aviation Industries FDA Regulations on Registration of Food Facilities Listen to the full podcast ...
-
Curtain down at ADIPEC - doors open for future business
With the focus on drill cuttings treatment econ did everything right during this year's ADIPEC exhibition. Talking to clients from all over the Gulf region it became obvious that our unique approach to supply technology that can be used for Diesel based drill cuttings, synthetic based drill cuttings as well as contaminated soils is extremely attractive on a mid and long term basis, in addition we ...
-
TDP-2 for drilling waste treatment increases capacity
An active exploitation of the Kuyumbinskoe oil and gas condensate deposit is accompanied by increasing of residual formation. IPEC company experts have developed technology for the purpose of technological process optimization and increasing of the Complex overall performance. The Pyrolysis Plant TDP-2-800 utilizes preliminary exposed to partial dehydration highly watered drilling waste. The ...
By IPEC
-
CEC issues determination in the drilling waste in cunduacan submission
On 8 April 2009, the Secretariat of the Commission for Environmental Cooperation (CEC) determined that, due to the existence of pending proceedings initiated by Mexico pursuant to Article 14(3)(a) of the North American Agreement on Environmental Cooperation, it could proceed no further with consideration of submission SEM-07-005 (Drilling waste in Cunduacan). In the submission, the Tabasco Human ...
-
Drilling waste management for Shell Oil China
Drilling waste management system including cuttings dryer ,high speed decanter centrifuge ,catch tank,screw feed pump were in operation in Shell Oil China OBM drilling waste management job site. from 6th,May 2012 to 21 th ,May 2012, totally 15days 85 hours. During this period, the well depths was drilled from 3110m to 3680m.rock physical character is argillaceous sandstone, oil based drilling ...
-
Soiltech awarded contracts with WintershallDea and Petrogas E&P
Soiltech has been awarded two contracts for drilling waste management, both on the jackup drilling rig Noble Resilient. This will be the first time Soiltech’s sustainable technologies are installed on this rig. WintershallDea has awarded Soiltech a contract for treating contaminated water during a plug and abandonment (P&A) campaign in the Danish sector of the North Sea, with estimated ...
By SoilTech AS
-
Range Resources to pay $4M drilling waste fine
Energy company Range Resources said Thursday it has agreed to pay a $4.15 million fine for environmental violations at a western Pennsylvania site that handled natural gas drilling waste. The penalty is the largest the state has ever imposed on the shale gas industry. Range, based in Fort Worth, Texas, said in a statement that it accepts the Pennsylvania Department of Environmental Protection ...
-
Sionix to own and operate its first wastewater treatment facility
Mobile water treatment systems company Sionix Corp is to design, build, own and operate a wastewater treatment facility (WWTF) in the Bakken Shale Formation in North Dakota. Sionix has reached an agreement with Dakota Solutions Inc to lease a property in Tioga, North Dakota. The WWTF will be designed specifically for the treatment of heavily contaminated production, flowback and frac water ...
-
Vertical cuttings dryer for Nigeria Shell Oil drilling waste management
FD Petrol drilling waste management system has arrived in Nigeria oilfield and begin operation.The system including SGL-01 cuttings dryer ,high speed decanter ,screw converyor,centrifugal pump,feed pump,fluids catch tank. FD Petrol patented cuttings dryer not only applicable for oil based mud ,but also for water based mud and blocking agent. According to our customer feedback,every one hour ...
-
Oil and gas industry waste treatment plant was presented at ADIPEC 2014
IPEC company presented the brand new modification of its waste treatment and management plants range TDP-2-200. Continuous Thermal Decomposition Plant was developed for drilling waste management and sludge removal. Oily sludge treatment is based on pyrolytic processing of hydrocarbon materials without absence of oxygen. Plant production capacity is 200 kg of waste per hour, operation mode ...
By IPEC
-
Project - UAE 4 - Habshan Expansion
Project Description: RLC Technologies was contracted to manufacture equipment to be used for the ADCO drilling operations in Habshan, UAE. The equipment was used to process drill cuttings. The waste was be treated to reduce the Total Petroleum Hydrocarbon (TPH), as per EPA procedures SW846/8015B and 1664, to below an environmentally acceptable limit of 0.5% Weight/Weight and to satisfactorily ...
-
Project - UAE 2 - Habshan
Project Description: RLC Technologies was contracted to manufacture equipment to be used for the ADCO drilling operations in Habshan, UAE. The equipment was used to process drill cuttings. The waste was be treated to reduce the Total Petroleum Hydrocarbon (TPH), as per EPA procedures SW846/8015B and 1664, to below an environmentally acceptable limit of 0.5% Weight/Weight and to satisfactorily ...
-
Oilfield Services Market to Aggregate USD 143 Billion by 2026
According to the Research Report, The global oilfield services market in 2019 was approximately USD 117 Billion The market is expected to grow at a CAGR of 3.35% and is anticipated to reach around USD 143 Billion by 2026.The oilfield services include various oil-related activities such as interference, stabilization, drilling, development, completion, and extraction, among several others to ...
-
Soiltech signs two contracts in Norway
Equinor has awarded Soiltech a contract for cuttings handling services on Oseberg Sør, with expected startup in the first quarter of 2024. Production on Oseberg Sør started in 2000 and several initiatives are evaluated to increase the production. Well Expertise has awarded Soiltech a contract for treating contaminated water on a mobile drilling rig in the North Sea, with expected ...
By SoilTech AS
-
Equinor extends contract with Soiltech
Equinor has exercised its first option to extend the drilling waste management contract with Soiltech for two years from 01.06.2024 to 31.05.2026. Equinor has options to extend the contract further until 2034. Under the contract, Soiltech provides our full technology portfolio of innovative and sustainable waste management solutions, including slop treatment, cuttings handling, swarf treatment ...
By SoilTech AS
-
The oil and gas industry leading thermal treatment technology
IPEC company presents its innovations and solutions in oil sludge and drilling waste management at the company’s first workshop – Oil Production And Oil Refinery Waste Treatment at its industrial site from 25 — 26 February 2015. Workshop Program: February 25 – Drilling muds and used drilling solutions treatment February 26 – Oil sludge and emulsions treatment ...
By IPEC
-
Project - Kuwait 1 - Kuwait Oil Company
Project Description: RLC Technologies was contracted to manufacture equipment the National Cleaning Company to remediate a Kuwait Oil Company (KOC) crude oil waste lagoon as well as process waste from drill cuttings, crude oil and waste from the ’91 war. The RLCT plant has been in continual use and remains in use today, processing these waste streams. Cleanup criteria was 1% (~10,000 mg/L) ...
Need help finding the right suppliers? Try XPRT Sourcing. Let the XPRTs do the work for you