Only show results in Texas? Ok

Electronics Recycling Applications

  • Premium

    Mercury Waste Plants for Oil & Gas Industry

    Mercury-contaminated wastes are a major challenge for many industries including the chlorine industry, oil & gas drilling, oil & gas refineries (catalysts) and fluorescent lamps recycling. Due to strict legal restrictions and HSE requirements, mercury-contaminated waste is required to be handled with special care. We at econ industries have the best solution for each specific mercury waste stream, with plants that are recognised as being state of the art from approval authorities worldwide.

    By econ industries services GmbH based in Starnberg, GERMANY.

  • Premium

    Machineries for e-waste shredding & recycling

    Governments and manufacturers of electronic hardware are increasingly coming under pressure regarding the safe disposal of electronic waste once their useful life has been completed. End-of-life (EOL) legislation for e-scrap is in place in many countries and pending throughout Europe and North America. Shred-Tech® has engineered and manufactured custom systems to shred, separate and recover the component materials that make up these electronic products.

    By Shred-Tech Corp. based in Cambridge, ONTARIO (CANADA).

  • Premium

    Machineries for product destruction & recovery

    Complete Turnkey Systems, custom designed and manufactured by Shred-Tech®, destroy, recover and separate a wide variety of off-spec, mis-packaged and out-dated products. Shred-Tech®’s Material Separation and Recovery / Destruction Systems are used around the world for recovering precious metals from computers and telecommunications scrap, nylon from carpet, and recyclables from MSW, just to name a few. Mis-packaged consumer products such as breakfast cereals, cosmetics, milk and juice containers,...

    By Shred-Tech Corp. based in Cambridge, ONTARIO (CANADA).

  • Premium

    Recycling equipments for electronic waste recycling (WEEE)

    The content of WEEE (electrical and electronic waste) gives recyclers various initiatives for recycling. It contains hazardous substances, such as lead, mercury or certain flame retardants, as well as precious metals like gold and silver. In 2012 approx. 64,900.000 ton electronic goods where produced and 49.000.000 ton electrical and electronic waste (WEEE) was generated. As the amount of sold electronic goods rise, the amount of WEEE rises. It is vital that this waste is taken care of properly.

    By Eldan Recycling A/S based in Faaborg, DENMARK.

  • Premium

    Recycling equipments for non-ferrous scrap metal shredding & recycling

    Non-Ferrous Metal Recycling is a large industry focusing on the recovery of metals such as aluminum, brass, copper, and even precious metals from electronic scrap. The applications and needs of non ferrous metal recyclers vary greatly. These can include a large corporate recycler buying UBC bales for shredding to be converted back into beverage cans or a small recycler who is recovering precious metals from circuit boards or catalytic converters.

    By Granutech-Saturn Systems based in Grand Prairie, TEXAS (USA).

  • Premium

    Recycling equipments for shredding scrap metals

    Scrap metal includes metals that can be reclaimed for use in manufacturing, processed for re-melting or prepared for disposal in landfills. These metals include industrial scrap metal and remainders, electronic scrap, aluminum and precious metals. Shredders prepare the metals for bailing and bundling, saving storage space, transportation and disposal costs. Quad shaft shredders reduce and separate electronic scrap and prototypes in one process, allowing for the recovery of precious metals. Dual or quad shaft...

    By Granutech-Saturn Systems based in Grand Prairie, TEXAS (USA).

  • Premium

    Harden Shredding Technology for Metal-processing Industry

    Harden Shredding Technology for Metal-processing IndustryMetal waste may be comes from the metal-processing industry, automotive industry, electronics industry, waste industry or commercial production, we will always offer you the right shredding system for recycling your valuable resources! The processing of scrap metal is strongly related to steelworks and, therefore, it becomes fundamental to deliver uniform material with a high specific weight. Harden scrap metal shredders are perfect parallel to shearing...

    By Harden Machinery Ltd. based in Zhongshan City, CHINA.

  • Premium

    Recycling equipments for refrigerator recycling

    The Eldan refrigerator recycling plant is designed for processing refrigerators operating with CFC/pentane gasses in order to prevent harmful substances to evaporate into the atmosphere and to achieve the most efficient recycling of the solid materials. A complete refrigerator recycling system includes everything from pre-chopping to separation of the material.

    By Eldan Recycling A/S based in Faaborg, DENMARK.

  • Premium

    Shredders and crushers for refrigerator recycling

    Several million scrap refrigerator units are disposed of every year in Germany alone. The proportion of refrigeration units recycled by volume totals about 40% and is the most significant segment after consumer electronics. One particular challenge in this recycling process is presented by chlorofluorocarbons such as R 11, R 12 or R 141b, which were used for decades as foaming agents for insulation materials. Since these substances damage the Earth’s ozone layer when released, they must be removed and...

    By Erdwich Zerkleinerungs-Systeme GmbH based in Igling, GERMANY.

  • Premium

    Plastic sorting for the plastics industry

    REDWAVE is a flexible system with applications in a variety of fields, especially for the plastics industry. No matter how complex the sorting task may be the REDWAVE range of sorting equipment can achieve high levels of purity. REDWAVE guarantees high waste throughput with effective recovery of required materials, achieving maximum return on the separated commodities.

    By REDWAVE - a division of BT-Wolfgang Binder GmbH based in Eggersdorf bei Graz, AUSTRIA.

  • Premium

    Optical sorting machines for electronic scrap (WEEE) industry

    Recovery of recyclables from Waste Electrical and Electronic Equipment (WEEE): Metals and alloys. Plastics (thermoplastics, plexiglass, etc.). Composite materials (circuit boards, etc.). Brominated plastics (BFR). Plastics with cadmium compounds. Material tainted with precious or recoverable metals (e.g. copper, brass, silver, etc.). Sorting of monitor glass (CRT), etc.

    By REDWAVE - a division of BT-Wolfgang Binder GmbH based in Eggersdorf bei Graz, AUSTRIA.

  • Premium

    Scrap Metal Recycling

    Metal scrap processing requires slow speed shredders and hammer mills to densify scraps such as drums, door & window frames, white goods, and metal skeletons. Many metal recyclers around the world use HARDEN shredders to remove airspace, increase density, so as to reduce transportation costs and improve pricing. The shredding process also prepares materials for sorting, delacquering systems and furnaces. With our hardened knife tips design, HARDEN low speed shredders can be used to process ferrous metal,...

    By Harden Machinery Ltd. based in Zhongshan City, CHINA.

  • Premium

    Cardboard Shredders

    Reducing transportation costs, compressing material for feeding to existing pressed-waste containers or baling presses are good reasons for deploying a cardboard shredder. Harden machinery’s paper and cardboard shredders are available for a variety of output demand, including all kinds of paper, cardboard tubes, and even production waste. Harden designs and manufactures machine based on paper and cardboard shredding systems, capable of shred up to 10 tons per hour. High torque shear shredding technology ensure a...

    By Harden Machinery Ltd. based in Zhongshan City, CHINA.

  • Premium

    Recycling Equipment for Plastics Industry

    Shredders for Plastics Scrap Size Reduction. Low cost alternatives for your waste plastics recycling equipments. Shredders for Plastic Scrap and E-scrap. Harden Machinery supplies single shaft and two/four shaft shear shredders for plastic scrap recycling and other solid waste size reduction applications. All of our machine are made in Chine with European design and Chinese cost. Our machines are being used in China and around the world.

    By Harden Machinery Ltd. based in Zhongshan City, CHINA.

  • Premium

    Recycling equipment for shredding electronic scrap (E-scrap)

    Processing electronic scrap (E-Scrap or WEEE) presents special challenges. Computers, consumer electronics, and IT equipment need to be destroyed to extract recyclables or ensure the security and complete destruction of the product. Hard drives, tapes and data storage devices must be completely destroyed to provide data security. And, while many electronic scrap items do not require the specific size reduction that hard drives or other data storage devices require, all electronic scrap includes recoverable...

    By Granutech-Saturn Systems based in Grand Prairie, TEXAS (USA).

  • Premium

    Processing of LCD screens

    The safe extraction of valuable raw materials: robots automatically dismantle monitors containing mercury, while protecting workers’ health at the same time. According to initial projections, around three million LCD screens will be recycled in Germany in 2016. However, their backlighting system often contains mercury, which means they are classified as 'hazardous waste' in accordance with the EWC, and as 'Collection Group 3' in accordance with the Electrical and Electronic Appliance Law. They also contain...

    By Erdwich Zerkleinerungs-Systeme GmbH based in Igling, GERMANY.

  • Premium

    E-scrap Recycling Equipment for Recycling Industry

    Electronic scrap (also named e-scrap) mainly includes discarded household appliance like refrigerator, TV, computer, washing machine, printer, fax machine, cellphone, circuit board, hard discs, CD ect. With the development of electronic industry and information technology, and electronic products’ fast replacement, the problem of e-scrap has become one of the stringent problems which need to be resolved effectively and correctly. Every year the 20 – 50 million metric tons of electronics end up in...

    By Harden Machinery Ltd. based in Zhongshan City, CHINA.

  • Premium

    Electronic scrap shredding for the electronic waste management industry

    One of the greatest challenges facing our society is the reclamation of valuable raw materials from electrical and electronic scrap. A global scrap volume exceeding 40 million tonnes a year – a figure forecast to double by 2025 – presents both a challenge and an opportunity. Since even in Germany only some 40% of scrap is currently fed into a waste management process, we may assume that the global rate of waste management is still substantially lower. With additional support from WEEE Directive...

    By Erdwich Zerkleinerungs-Systeme GmbH based in Igling, GERMANY.

  • Premium

    Shredder solutions for the material recovery facilities (MRF)

    A Materials Recycling Facility (MRF) uses the latest technology to recycle a range of materials.

    By Harden Machinery Ltd. based in Zhongshan City, CHINA.

Need help finding the right suppliers? Try XPRT Sourcing. Let the XPRTs do the work for you