Only show results in Texas? Ok

Four Shaft Shredding Applications

  • Premium

    Recycling equipments for white goods

    Granutech Saturn Systems design and manufacture white goods shredders and systems capable of sorting the ferrous fraction from the fluff and can equip these with eddy current and other finder technology to sort aluminum, stainless, and other recoverable metals.

    By Granutech-Saturn Systems based in Grand Prairie, TEXAS (USA).

  • Premium

    Recycling equipments for shredding scrap metals

    Scrap metal includes metals that can be reclaimed for use in manufacturing, processed for re-melting or prepared for disposal in landfills. These metals include industrial scrap metal and remainders, electronic scrap, aluminum and precious metals. Shredders prepare the metals for bailing and bundling, saving storage space, transportation and disposal costs. Quad shaft shredders reduce and separate electronic scrap and prototypes in one process, allowing for the recovery of precious metals. Dual or quad shaft...

    By Granutech-Saturn Systems based in Grand Prairie, TEXAS (USA).

  • Premium

    Recycling equipments for non-ferrous scrap metal shredding & recycling

    Non-Ferrous Metal Recycling is a large industry focusing on the recovery of metals such as aluminum, brass, copper, and even precious metals from electronic scrap. The applications and needs of non ferrous metal recyclers vary greatly. These can include a large corporate recycler buying UBC bales for shredding to be converted back into beverage cans or a small recycler who is recovering precious metals from circuit boards or catalytic converters.

    By Granutech-Saturn Systems based in Grand Prairie, TEXAS (USA).

  • Premium

    Recycling equipments for ferrous scrap metal shredding & recycling

    Ferrous scrap metal includes metals that can be reclaimed for use through traditional ferrous scrap recovery systems. These metals include a wide variety of light ferrous scrap such as sheet steel, 55 gallon drums, white goods, and other forms of loose tin. Heavier ferrous scrap can be processed through the Saturn hammermill line of shredders which also produce a more consistent, higher density shred. Shredders prepare the metals for further separation or directly to end ferrous scrap consumers. Additional...

    By Granutech-Saturn Systems based in Grand Prairie, TEXAS (USA).

  • Premium

    Machineries for plastics shredding & recycling

    Shred-Tech® custom designs and manufactures Plastic Shredding Systems to reclaim post consumer and industrial plastic wastes. Dual and four shaft shredders are often used to reduce large molded items, purgings, engineered plastics, film, etc., so that they may be further granulated for reuse in molding or directly to extruding.

    By Shred-Tech Corp. based in Cambridge, ONTARIO (CANADA).

  • Premium

    Recycling Equipment for Plastics Industry

    Shredders for Plastics Scrap Size Reduction. Low cost alternatives for your waste plastics recycling equipments. Shredders for Plastic Scrap and E-scrap. Harden Machinery supplies single shaft and two/four shaft shear shredders for plastic scrap recycling and other solid waste size reduction applications. All of our machine are made in Chine with European design and Chinese cost. Our machines are being used in China and around the world.

    By Harden Machinery Ltd. based in Zhongshan City, CHINA.

  • Premium

    Special plants for recycling of toners

    Printer consumables and empty toner cartridges cannot be grouped with municipal solid waste but require special treatment for recycling. FORREC has designed an exclusive plant that provides specific processing for this type of waste. The system developed and produced by Forrec consists in a treatment with a four-shaft shredder that provides a reduction to less than 40mm allowing the subsequent separation of iron, plastic and non-ferrous materials. A dust suction system is combined with a shredding system.

    By Forrec srl based in Santa Giustina in Colle, ITALY.

  • Shredding solutions for pharmaceutical industry

    The shredding process of this pharmaceutical waste can be carried out with the three type of machines by SatrindTech: the single shaft, the three- and the four-shaft shredders. The purpose of the process is twofold: to recover the plastic blister and to destroy expired medicines safely.

    By SatrindTech Srl based in Arluno, ITALY.

  • Shredding solutions for textile and carpets industry

    All those textile materials (derived from natural or synthetic fibers) arrived at the end of the cycle, carpeting and rugs are shredded and used inside the mix of materials composing the RDF or SRF. The operation can be carried out in two or in one single stage. A two-stage process (volume reduction with two-shaft shredders and subsequent refinement of the final size of the material with single-, three- or four-shaft shredders) will grant a higher production and energy saving (in proportion) while, if processed...

    By SatrindTech Srl based in Arluno, ITALY.

  • Shredding solutions for OTR (off-the-road) tyres

    For shredding OTR (Off-The-Road) tyres up to 51″, SatrindTech proposes two-shaft shredders, suitable to a volume reduction of the material. Before proceeding with the shredding phase, it is essential, however, to remove the two central rings of the tyre with a hydraulic debeader and, subsequently, to slice the tire with a hydraulic shrear so to get pieces with a proper size for being introduced in the shredder hopper. After using a two-shaft shredder to get a first reduction of the material, four-shaft...

    By SatrindTech Srl based in Arluno, ITALY.

  • Shredding solutions for pallets, dry wood in general and green wood industry

    The treatment of this material is mainly for a reuse of this material for energy purpose: with wood shredding we refer to pallet and dry wood shredding while with green wood we consider the crashing of the gardening or agricultural waste. Depending on the desired final size, with dry wood different types of shredders can be used: a crusher or a shredder with T-blades can be used for a mere volume reduction of the material or single-, three- and four- shaft shredders if the purpose is getting a size controlled....

    By SatrindTech Srl based in Arluno, ITALY.

  • Shredding solutions for Aluminum SWARFS

    The aluminum industry recovers much of the material required by reprocessing machining waste. In order to re-use this kind of waste as the second material, it is necessary to obtain in a suitable size for the subsequent processing stages with briquetting or hammer mills. SatrindTech proposes two-shaft shredders for the volume reduction of the hanks and three- and four-shaft shredders for the subsequent shredding step for obtaining a controlled size of the waste.

    By SatrindTech Srl based in Arluno, ITALY.

  • Shredding solutions for cardboard and packaging recycling industry

    Cardboard and packaging recycling is intended to recover cellulose from the material treated. It is estimated that we can pulp the material up to six or seven times and that over 50% of the product cardboard produced in Europe comes from the recovery of cellulose. For this purpose, SatrindTech proposes two-shaft shredders for the first application and single-, three- and four- shaft shredders for the second.

    By SatrindTech Srl based in Arluno, ITALY.

  • Shredding solutions for food industry

    This category includes both the wet fraction of MSW (generally collected in the appropriate compostable bags) and all that waste generated by the food industry. If treated properly, this waste can be reintroduced in the production cycle. SatrindTech proposes two-shaft shredders or bag opener for preparing the material for the subsequent steps of separation and composting cycle. If the industrial applications may require a controlled size of the output, the choice has to be fall onto single-, three- and four-shaft...

    By SatrindTech Srl based in Arluno, ITALY.

  • Shredding solutions for Metal SWARFS

    The metal industry recovers part of the material by reprocessing machining waste. In order to re-use this kind of waste as the second material, it is necessary to obtain in a suitable size for the subsequent processing stages with briquetting or hammer mills. SatrindTech proposes two-shaft shredders for the volume reduction of the hanks and three- and four-shaft shredders for the subsequent shredding step for obtaining a controlled size of the waste.

    By SatrindTech Srl based in Arluno, ITALY.

  • Shredding solutions for automotive oil filters industry

    The oil filters mounted on cars, trucks and tractors, if shredded and properly processed, can return the 97% of the materials. The components which can be recovered are oil, paper, plastics, ferrous materials and not.

    By SatrindTech Srl based in Arluno, ITALY.

  • Shredding solutions for refuse derived fuel (RDF) industry

    It’s the so-called Residue Derived Fuel, obtained by treating the dry fraction of the MSW that, after having carefully removed glass, metals and inert, has suitable characteristics to be used as an alternative fuel. The mix of materials are paper (less than 50%), plastic (less than 25%), textiles (less than 15%), organic (less than 15%), wood and other (less than 5%). It is mainly used in cement and steel production plants and energy production plants. SatrindTech proposes two-shaft shredders as primary...

    By SatrindTech Srl based in Arluno, ITALY.

  • Shredding solutions for paper waste industry

    The shredding of paper waste is carried out for two main purposes: shredding for recycling or shredding for destroying. In the first case we have a volumetric reduction (done with two-shaft shredders) in order to obtain the ideal size for proceeding with baling or pressing. In the second case, is more related to the safe destruction of the information contained in private and confidential documents, which dimensions have to be done in according to the DIN 66399 directive. This establishes the security parameters...

    By SatrindTech Srl based in Arluno, ITALY.

  • Shredding solutions for automotive components

    They are all those plastic and textile materials in the car that can be shredded. SatrindTech proposes a two-shaft shredders for volume reduction of bumpers, headlights and three- and four-shaft shredders for shredding automotive interior fabric, sponge and plastic type of synthetic materials.

    By SatrindTech Srl based in Arluno, ITALY.

  • Shredding solutions for Electronic Waste (WEEE)

    The constant technological improvements of the electronic devices and the subsequent obsolescence of the electronic equipment we use on a daily base has increased the amount of the material to be processed in the metal and plastic recycling business. PCs, laptops, smartphones, USB sticks, credit cards, microwaves, washing machines are just some examples of the products that can be processed in order to recover materials.

    By SatrindTech Srl based in Arluno, ITALY.

Need help finding the right suppliers? Try XPRT Sourcing. Let the XPRTs do the work for you