Glass Recycling Applications available in Australia
-
Premium
Near-Infrared Analysis for Edible Oil Sector
Fats and oils are recognized as essential nutrients in human diets and are presented in varying amounts in many foods. They provide the human body with a concentrated source of energy and supply essential fatty acids that are precursors for important hormones. The quality of edible fats and oils is assessed through parameters such as iodine value (IV), trans content, peroxide value (PV), anisidine value (AV), saponification number (SN), free fatty acids (FFA), and solid fat content (SFC). The traditional chemical ...
By Galaxy Scientific Inc based in Nashua, NEW HAMPSHIRE (USA).
-
Premium
Hand-Held & Process Control Water Testing Instrument for Circuit Board Cleanliness Testing Industry
Contamination of circuit boards can bring about severe degradation of insulation resistance and dielectric strength. Cleanliness of completed circuit boards is, therefore, of vital interest. For those companies who have established circuit board cleaning procedures, the MIL Spec P-28809 has been used as a guideline for control. Now a simple 'on line' test for the relative measurement of ionic contamination has been developed. This fast and economical method for testing circuit board cleanliness uses a Myron L ...
By Myron L Company based in Carlsbad, CALIFORNIA (USA).
-
Premium
Air pollution, emission and process monitoring systems for minerals
ENVEA’s experience of working in the Mineral Industry has led to the development of an extensive range of unique ambient, emission and process monitoring solutions to suit often challenging process conditions. In addition to main stack emission monitoring and measurement, by closely monitoring process conditions such as solids flow, the measurement of material mass via non-intrusive, solid state powder mass measuring systems and proactive baghouse performance monitoring can improve process ...
By ENVEA based in Poissy, FRANCE.
-
Premium
Mixing and Grinding Technology for Preparation of Glass Batches
The key to quality glass: A homogeneous batch. Glass batches consist of many individual components which in some cases differ considerably in terms of ...
By Maschinenfabrik Gustav Eirich GmbH & Co KG based in Hardheim, GERMANY.
-
Premium
Metal Separators for Glass
REGULATOR-CETRISA, as manufacturer of metals separation equipment, offers different solutions for cleaning metal pollutants from ...
By Regulator-Cetrisa based in Gavà, SPAIN.
-
Premium
Gas analyzers from combustion: control emission monitoring
Today different ministerial directives lead the market to follow the industries. There are power stations, incinerators (domestic wastes, mud, hospitals…) cement industry, ...
By Chromatotec Group based in Val de Virvée, FRANCE.
-
Premium
Combustion gas analysis for the indoor environment industry
Flue-gas analyzers are designed to be rugged and accurate at the same time. They are used by the HVAC industry, energy industry, process control, glass industry, food industry, universities and analysis is required. ...
By IMR Environmental Equipment, Inc. based in Saint Petersburg, FLORIDA (USA).
-
Premium
Continuous emissions monitoring for glass manufacturing industries
Process control and emissions monitoring in a glass manufacturing plant is a challenge due to high temperature in the flue gas. The OPSIS DOAS system provides the glass industry with an accurate analyser that will operate with a minimum of maintenance. The OPSIS DOAS system is based on a non-contact method that uses an optical path to measure across the duct. A single OPSIS system will measure all relevant gas componensts such as NOX, SO2, CO, CO2, H2O, O2, and ...
By OPSIS AB based in Furulund, SWEDEN.
-
Premium
Emission control solutions for glass and ceramic furnaces sector
Glass and ceramic furnaces are typically associated with emissions of very fine particles (less than 5µm) in combination with high temperatures and load. An increasingly higher number of furnaces are powered with biomass fuel, further raising the level of particulate emissions that need to be treated, in order to comply with stricter regulatory limits. Solving this problem may or not require a two stage dedusting system such a cyclone pre-separation system followed by an ESP. Client's needs ...
By Advanced Cyclone Systems, S. A. (ACS) based in Porto, PORTUGAL.
-
Premium
Compressed air and industrial gases solutions for glass industry
Energy savings solutions in glass industry with VPInstruments. In a glass packaging plant, a VPVision system with over 20 compressed air flow meters keeps an eye on compressor efficiency and ...
By VPInstruments based in Delft, NETHERLANDS.
-
Premium
Metal Separators for Metal
REGULATOR-CETRISA, as manufacturer of metals separation equipment, offers different solutions for cleaning metal pollutants from metal ...
By Regulator-Cetrisa based in Gavà, SPAIN.
-
Premium
Flame Photometer for Recommended Sample Handling Techniques & Considerations
Preparation of Glassware: Thoroughly clean and rinse all glassware with the supplied BWB Technologies deionised distilled water to ensure that it is clean and free of extractable sodium and potassium. Glassware should be acid cleaned and rinsed thoroughly in deionised double distilled water prior to use to avoid contamination from extractable metals under ...
By BWB Technologies Ltd. based in Newbury, UNITED KINGDOM.
-
Premium
XRF Spectrometers solutions for RoHS and WEEE Testing sector
There is no secret that in the EU, every sphere of the industry that concerns production falls under different regulations that concern waste exposure and recycled materials usage. When it comes to electronics, there are two directives that regulate the issues: RoHS and WEEE. They regulate the existence and concentration of harmful substances in various categories of production (RoHS) and responsibility for the proper recycling of electrical equipment (WEEE). These regulations can prevent appearance on the EU ...
By Elvatech Ltd. based in Kyiv, UKRAINE.
-
Premium
Application package FLUXANA Raw Materials for Cement, Glass and Steel Industry
This application package is a 'ready to go' calibration kit for xrf instruments. Fusion technology is ideal for analysing oxidic materials like minerals or raw materials. It performs with the highest precision possible in xrf sample preparation. ...
By Fluxana GmbH Co. KG based in Bedburg-Hau, GERMANY.
-
Premium
Ozone generators for olive oil application
Ozonated Olive Oil is an amazing substance, used for healing wounds that would otherwise not heal. Stories abound of patients unable to heal wounds with topical and IV antibiotics, finally able to heal their wounds with topical application of ozonated oilive oil. The secret? The Ozonated Olive Oil not only kills bacteria, fungus, and other pathogens thereby sterilizing the wound, but it also does what no antibiotic could possibly do - stimulate the healing ...
By Absolute Ozone® based in Edmonton, ALBERTA (CANADA).
-
Premium
Combustion gas analysis for the glass industry
Flue-gas analyzers are designed to be rugged and accurate at the same time. They are used by the HVAC industry, energy industry, process control, glass industry, food industry, universities and analysis is required. ...
By IMR Environmental Equipment, Inc. based in Saint Petersburg, FLORIDA (USA).
-
Premium
Application package FLUXANA Glass
This application package is a 'ready to go' calibration kit for xrf instruments. In the glass industry, raw materials have to be analysed together with the quality control samples from production. FLUXANA has created two basic programs Raw Materials (CS-0022) and Glass (CS-0016) for these two purposes, which can be individually adapted by the ...
By Fluxana GmbH Co. KG based in Bedburg-Hau, GERMANY.
-
Premium
Magnets for the plastic and glass manufacturing industry
Magnetic equipment including Eddy Current separators from Master Magnets are used to remove ferrous and non-ferrous impurities from shredded plastics and crushed glass. The segregation of Aluminium ring-pulls and bottle caps ensures a cleaner glass product for efficient recycling. ...
By Bunting - Redditch based in Redditch, UNITED KINGDOM.
-
Premium
Application package FLUXANA RAW- Glass
This application package is a 'ready to go' calibration kit for xrf instruments. In the glass industry, raw materials have to be analysed together with the quality control samples from production. FLUXANA has created two basic programs Raw Materials (CS-0022) and Glass (CS-0016) for these two purposes, which can be individually adapted by the customer. The application package raw materials can, for example, contain: - Calibration set raw materials prepared from CRM as glass beads - Calibration work ...
By Fluxana GmbH Co. KG based in Bedburg-Hau, GERMANY.
-
Premium
Monitors and analysers for Glass industry
Precision temperature measurements are critical to the glass-making process. We supply a range of advanced solutions designed specifically for the glass industry, meeting the highest standards of quality and reliability. Glass is used for a variety of purposes, and can be shaped, toughened, coloured, laminated or treated to suit specific requirements. Our measurement systems provide accurate temperature monitoring to support these applications. As the world leader in temperature measurement, AMETEK Land has ...
By AMETEK Land Instruments International Ltd based in Dronfield, UNITED KINGDOM.
Need help finding the right suppliers? Try XPRT Sourcing. Let the XPRTs do the work for you