screen glass News
-
Binder+Co awarded the 2011 National Prize for Work Safety
Following last year’s National Prize for Innovation, the Styria-based mechanical engineering company Binder+Co has now received another important Austrian award in the shape of the 2011 National Prize for Work Safety. The Austrian National Prize for Work Safety is awarded biannually to companies that raise health and safety standards in the workplace beyond statutory requirements by means ...
By Binder Co
-
Binder+Co Q1/2010 results clearly down on the previous year’s level, order backlog in line with the long-term average
In line with expectations, Binder+Co, as a company positioned at the end of the economic cycle, first fully felt the effects of the global crisis in 2010. Overall, the Gleisdorf-based specialist for processing, environmental and packaging technology closed the first quarter of 2010 with a positive result, but both sales revenues and EBIT were markedly lower than the figures for the preceding ...
By Binder Co
-
Binder+Co 2009 – a soft landing in the crisis thanks to systematic innovation
At today’s presentation of its annual report for 2009, Binder+Co was able to present results, which in view of the tense general economic situation, are worthy of special note. However, a marked fall in order backlog over the preceding year means that 2010 will continue to be characterised by major challenges. Unsettled market environment In 2009, the economic environment for ...
By Binder Co
-
In H1/2010, Binder+Co’s key indicators lagged behind those of the preceding year, but showed a marked upturn in order intake.
In the first half-year 2010, the Gleisdorf-based processing, environmental and packaging technology specialist once again achieved a clearly positive result, although sales revenues and EBIT remained below the figures for the preceding year. However, especially during the second quarter, positive signals emanated from an upswing in order intake. “As a company that is traditionally affected ...
By Binder Co
-
Redwave XRF: new sorting possibilities for a multitude of materials
Austrian sensor-based separation and sorting equipment specialist Redwave has introduced a new sorting system – the Redwave XRF – which analyses and evaluates materials according to chemical composition. The new Redwave XRF sorting system was initially used in the field of glass sorting, more precisely for the separation of heat-resistant and leaded glass from waste glass cullet. ...
-
ALLU Finland Oy launch heavy series Screener Crushers
ALLU Finland Oy launch heavy series Screener Crushers ALLU started this spring at Bauma Munich impressively by launching two new Screener Crusher models. These new models, ALLU SCH and SCM are designed for users who want to treat high volumes of material. Both of the models are designed to fit larger excavators and wheel loaders. ALLU SCH rocks on pipeline job sites ...
-
Binder+Co order intake in Q1–3/2010 shows a clear upturn
During Q1–3/2010, Binder+Co, the innovative machine and plant manufacturer from Gleisdorf in Austria, was able to increase its order intake by a notable 50% over the previous year. However, company sales revenues and EBIT remained below the 2009 level. In view of these facts, Karl Grabner, from the Binder+Co Management Board is not dissatisfied: “Although our sales revenues and EBIT ...
By Binder Co
-
Binder+Co takes over Italian mechanical engineering company
The internationally successful Binder+Co AG is on an expansion course. Yesterday, the contracts were signed for the takeover of the Comec mechanical engineering company, which is located near Treviso in northern Italy. Comec is active in the raw material processing area and will complement the Binder+Co portfolio with products for the important crushing process. Karl Grabner from the Binder+Co ...
By Binder Co
-
Binder+Co starts 2011 with strong, first quarter growth
Binder+Co, the innovative machine and plant manufacturer from Gleisdorf in Austria, began the 2011 financial year in a highly successful manner. Company sales revenues were some 44% higher at EUR 17.34 million, EBIT more than trebled to EUR 1.10 million and order intake was 70% up at EUR 19.87 million. In view of these facts, Karl Grabner, from the Binder+Co Management Board is well pleased: ...
By Binder Co
-
CP Group installs 25TPH MRF for ReCommunity
The CP Group, headquartered in San Diego, CA, has designed, manufactured and installed a new single stream recycling facility in Beacon, NY. The facility, built for ReCommunity, began running April 23rd, and is processing 25TPH. The material recovery facility is estimated to process 57,000 tons this year and 90,000 in 2013. The facility serves the Dutchess County residents and businesses in the ...
-
Binder+Co 2010 progressing well: sales revenues and EBIT above the level of last year, order intake up by a notable 39%
With sales revenues of EUR 63.25 million and EBIT of EUR 7.22 million, in 2010 we not only surpassed the figures for the preceding year, but also returned to our pre-crisis levels. Order intake in the second half-year even returned to the record level of 2008 and therefore we can be genuinely satisfied.” Karl Grabner, member of the Binder+Co Management Board. Generally difficult and ...
By Binder Co
-
ReCommunity and CP Group Tucson MRF now in Full Operation
ReCommunity, headquartered in Charlotte, N.C., has started up its Tucson, AZ, 25 tons-per-hour residential recycling system. The new recycling facility was designed, manufactured and installed by the CP Group. Installation was complete earlier in July and the facility is now in full operation. The system is designed to process 25TPH of newspaper, mixed paper, cardboard, beverage cartons, steel, ...
By The CP Group
-
CP Group and Veolia team up for unique MRF in UK
The CP Group, headquartered in San Diego, CA, designed, manufactured and installed the Material Recovery Facility for Veolia in Gillmoss, Liverpool, UK. The facility, which is capable of processing 85,00TPA, has been in operation since late 2011, and recently had its grand opening. The large facility processes a mix of household recyclables including cardboard, paper, glass, steep cans, ...
By The CP Group
-
Casella opens zero-sort facility, built by CP Manufacturing
CP Manufacturing, San Diego, CA, installed a new Zero-Sort Facility for Casella in Rutland, Vermont. The 30,000TPY Zero-Sort Facility is now in full operation. The new facility is expected to drive improved recycling rates in the surrounding communities of Vermont, as well as from Glen Falls, NY, all the way south to Concord, New Hampshire. Zero-Sort, Casella’s brand of single stream ...
Need help finding the right suppliers? Try XPRT Sourcing. Let the XPRTs do the work for you