Granulation Systems Applications available in Massachusetts
-
Premium
Machineries for plastics shredding & recycling
Shred-Tech® custom designs and manufactures Plastic Shredding Systems to reclaim post consumer and industrial plastic wastes. Dual and four shaft shredders are often used to reduce large molded items, purgings, engineered plastics, film, etc., so that they may be further granulated for reuse in molding or directly to ...
By 3R-Machinery (by Shred-Tech) based in Raleigh, NORTH CAROLINA (USA).
-
Premium
Waste Treatment Solution for Municipal Solid Waste
Mixed MSW is a general term for recyclable waste, organic waste, hazardous waste, combustible waste, ...
By Suzhou Jono Environmental Technology Co., Ltd based in Suzhou, CHINA.
-
Premium
Technologies for Wastewater Treatment in Breweries
The "ideal" treatment of waste from beer (and not only) must respect the legal limits, produce the minimum possible quantity of sludge and recover the maximum possible amount of energy. Fluence offers an anaerobic solution on wastewater and sludge + aerobic wastewater treatment. The anaerobic solution uses a "Rapid" granular sludge digester. It is a digester in which a particular type of sludge capable of "granulating" grows and it is used for very low COD (> 2000 Öºmg / l) as long as the waste contains sugars or ...
By Fluence Corporation based in White Plains, NEW YORK (USA).
-
Premium
Cutting-Edge Technologies for Refractory Compounds
For many decades now, Eirich has been the leading supplier of cutting-edge technologies for the preparation of refractory compounds. ...
By Maschinenfabrik Gustav Eirich GmbH & Co KG based in Hardheim, GERMANY.
-
Premium
Recycling equipments for shredding solid waste & municipal solid waste
Solid waste and municipal solid waste (MSW) size reduction requires processing of many different materials, from filled drums to household waste. And, as the amount of solid waste increases and the cost of landfill management increases, it is becoming more critical that waste management become more effective, economic and efficient. Shredded and compacted waste is easier and cheaper to transport and extends the life of the landfill. In addition, separating out materials that can be reclaimed and recycled or that ...
By Granutech-Saturn Systems based in Grand Prairie, TEXAS (USA).
-
Premium
Mixing and Grinding Technology for Food Products
The CleanLine series has been completely redesigned by Eirich to meet the requirements of hygienic applications such as in the food ...
By Maschinenfabrik Gustav Eirich GmbH & Co KG based in Hardheim, GERMANY.
-
Premium
Paper shredding for the paper recycling industry
Lindner shredding machines also reduce paper waste of all kinds to the granulate size required by the customer. The extensive experience of our design specialists and application technicians ranges from pro-cessing of recovered paper via destruction of documents to manufacturing cellulose insulating ...
By Lindner-Recyclingtech GmbH based in Spittal/Drau, AUSTRIA.
-
Premium
Recycling equipments for tire shredding and recycling
Granutech Saturn Systems offers a complete line of tire shredding, granulating and powderizing equipment designed to process scrap tires for recycling and repurposing. With over 40 years of experience developing machinery to provide high quality rubber from scrap tires, Granutech Tire Shredders provide cost-effective options for shredding tires, separating rubber from steel and generating granulated or powderized rubber for recycling operations. Our staff has decades of experience in the scrap tire industry, and ...
By Granutech-Saturn Systems based in Grand Prairie, TEXAS (USA).
-
Premium
Recycling equipments for shredding industrial plastics
Plastics are one of the most commonly recycled materials today. Granutech’s Saturn Shredders are designed to process a wide range of plastic materials, from films to pipe. Our high performance shredders use low to mid-range speed, and high torque to efficiently cut the plastic materials while preventing melting during processing. Custom blade sizes and configurations offer precise sizing and produce materials ready for downstream processing. Our systems can integrate grinders and granulators to complete ...
By Granutech-Saturn Systems based in Grand Prairie, TEXAS (USA).
-
Premium
Activated carbons solutions for home water filters industry
As standards of living continue to increase in developed nations, consumers demand higher quality drinking water from their taps. Activated carbon is the time tested solution to meet these challenges. Jacobi offers a full range of products for water treatment from the AquaSorb™ line especially designed for use in home water filtration ...
By Jacobi Group based in Kalmar, SWEDEN.
-
Premium
Mixing and Grinding Technology for Environmental
Eirich offers tried and tested solutions at the highest technical level for the following ...
By Maschinenfabrik Gustav Eirich GmbH & Co KG based in Hardheim, GERMANY.
-
Premium
Recycling equipment for shredding electronic scrap (E-scrap)
Processing electronic scrap (E-Scrap or WEEE) presents special challenges. Computers, consumer electronics, and IT equipment need to be destroyed to extract recyclables or ensure the security and complete destruction of the product. Hard drives, tapes and data storage devices must be completely destroyed to provide data security. And, while many electronic scrap items do not require the specific size reduction that hard drives or other data storage devices require, all electronic scrap includes recoverable ...
By Granutech-Saturn Systems based in Grand Prairie, TEXAS (USA).
-
Premium
Near-Infrared Analysis for Rice Sector
Rice is one of the most important crops for feeding mankind. In 2013, rice was the world’s second largest grain crop, (corn being first), and half of the world’s population consumed rice. With the growth of the world population and global economic development, the demand for rice will continue to increase. To efficiently supply this surging demand, it is important to improve rice varieties, quality, and crop ...
By Galaxy Scientific Inc based in Nashua, NEW HAMPSHIRE (USA).
-
Premium
Recycling equipment for industrial rubber shredding & recycling
Granutech Saturn Systems has over 40 years’ experience designing and manufacturing world-class shredders for industrial rubber scrap. We have consistently been in the forefront of developing machinery to provide high quality rubber crumb from rubber and tire scrap. Whether your application is processing remainders from rubber molding, shredding rubber scrap or shredding tires, we have the expertise to design a custom solution that meets your exact application and processing ...
By Granutech-Saturn Systems based in Grand Prairie, TEXAS (USA).
-
Premium
General Industrial Waste Recycling Solution
Enerpat's general industrial waste solutions integrate hardware and software and adopt a modular design. The production line covers a crushing system, magnetic separation system, packing system, RDF granulation system, dust collection system, etc. ...
By Enerpat Group based in Nantong, CHINA.
-
Premium
Preparation Technology for Friction Lining Compounds
Eirich mixing systems have been used for years by many satisfied producers in the friction lining industry. They provide obvious advantages and deliver excellent results for all types of linings used in the production of bicycles, passenger cars, commercial vehicles, rail vehicles and in industrial ...
By Maschinenfabrik Gustav Eirich GmbH & Co KG based in Hardheim, GERMANY.
-
Recycling of Plastic
For the recycling of plastic we offer a wide range of solutions:shredding, separation, granulating , cleaning , ...
By eFACTOR3 LLC based in Pineville, NORTH CAROLINA (USA).
-
Vacuuming and cleaning solution for the food industry
Cleaning solution for for the food industry. Our air gun cleaning solutions to fluidize the production of animal or human food remove material deposits, clogging and concretions in storage units and material conveyance chutes. Depending on the moisture content of the silo, clogging of sugar, soya, bran and flour can ...
By Standard Industrie based in Roubaix Cedex 1, FRANCE.
-
Shredding solutions for scraps and purge production waste
The production processes within the plastic industry foresee the use of hot working machines and systems which generate a high percentage of production waste. The resulting waste material (purges in the case of extrusion plants or defective products in general proceeding from injection moulding lines, blow molding, production of plastic film, of tanks) can be reintroduced again in the production process (if the characteristics of the processed product are suitable) or used as the second material for other ...
By SatrindTech Srl based in Arluno, ITALY.
-
Containers for solid hazardous materials
Bins for disposal of solid materials harmful to the environment such as cleaning rags and wipes, paints, granulates, binders for oil and chemical ...
By P. Henkel GmbH based in Kreuztal, GERMANY.
Need help finding the right suppliers? Try XPRT Sourcing. Let the XPRTs do the work for you