Grease Treatment Equipment For Waste And Recycling Available In Israel
-
PremiumManufactured by Toro Equipment S.L.based in SPAIN
Its mission is to eliminate the solids carried by the water, in order to avoid clogging and mechanical problems in the installations. This equipment requires little maintenance and operates continuously, without the need for electricity. In urban waters, they can replace primary decanters in many cases, providing the elimination of coarse sands and up to 30% percentages of grease and effluent ...
-
PremiumManufactured by Ecological Laboratories, Inc.based in USA
MICROBE-LIFT/DGTT is designed specifically for industrial and municipal effluent line and trap treatment. MICROBE-LIFT/DGTT will eliminate odor and provide significant reduction in line and trap maintenance. Degrades grease, fat and oils, reduces line and trap deposits and accumulations, resulting in lower fats, oil and grease (FOG). MICROBE-LIFT/DGTT works in a wide range of temperatures. ...
-
Manufactured by Stolzbased in FRANCE
Pellet mill range designed for the compression of powdery products for animal nutrition meeting health, safety and normative requirements, or for the compression of any ...
-
Manufactured by Potential Engineeringbased in INDIA
CPI (corrugated plate interceptor) separators are used predominantly to separate free oil from wastewater/effluent. CPI unit is deployed at the primary stage of wastewater treatment wherein plate packs are used as the main separation device. The plate packs are designed with specific spacing and alignment to enable solids to settle and fall to the bottom while allowing oil drops to rise and ...
-
Manufactured by Roebic Laboratories, Inc.based in USA
A cylindrical shaped solid designed to be hung in a grease trap, large drain line or pump chamber. Trap-Sak dissolves slowly, continuously releasing fat and food-digesting Roe-Tech bacteria. Trap-Sak also contains surfactant and odor neutralizing ...
-
Manufactured by Potential Engineeringbased in INDIA
Hydrocyclone oil water separator is a skid-mounted packaged solution. It is a simple and most powerful oil water separator that does not use consumables or chemicals. In this separator oily water is pumped tangentially into the separator using a high-pressure low shear pump, it forms a powerful vortex and a huge centrifugal force. The centrifugal force is 1000 times stronger than the force of ...
-
Manufactured by Salherbased in SPAIN
Salher grit chambers and grease separators are systems made of GFRP to separate sands, oils and organic grease (animal and vegetal) from water by density ...
-
Manufactured by Beckart Environmental, Inc.based in USA
Beckart centrifuge systems have wide appeal wherever the highest standards of filtering and separation technology are required. From process applications such as food, beverage, pharmaceutical and energy product manufacturing … to wastewater treatment applications where sludges and slurries are produced and require dewatering to meet recycling and local discharge standards … there ...
-
Manufactured by Potential Engineeringbased in INDIA
TPI (Tilted plate interceptor) separators are used predominantly to separate free oil from effluent. TPI unit is deployed at the primary stage of wastewater treatment wherein plate packs are used as the main separation device. The plate packs are designed with specific spacing and alignment to enable solids to settle and fall to the bottom while allowing oil drops to rise and coalesce. A TPI is ...
-
Manufactured by Schreiber LLCbased in USA
Schreiber’s Screw Pumps are manufactured in two types, Open Flight Screw Pump and Tube Mounted Screw Pump (available in variable angle and stationary angle). The Open Flight Screw Pump is a traditional Archimedes, with a design concept that dates back over 2,000 years. The Tube Mounted Screw Pump is a variation of the Archimedes screw pump inserted in a steel tube (pipe). The Tube Mounted ...
-
Manufactured by Potential Engineeringbased in INDIA
Slotted pipe oil skimmers are used in API separators, steel mills, refineries, and wastewater treatment. The skimmer is a rotating pipe with C-shaped slots. The C-shaped slots are rotated down to water level to skim the oil. The pipe is turned up/ and or above the water level when skimming is not required. The skimmer can be installed in a pit with a water level variation of up to 2 meters ...
-
Manufactured by Environmental Products and Services Ltdbased in NORTHERN IRELAND
GreaseShield is the only proactive greasetrap in the world to deal with emulsified FOGs. Automatically separates grease from effluent to achieve < 100 ppm FOG Discharge. GreaseShield removes entrained solids to reduce BOD, COD and SS loadings. Eliminates frequent pumping costs, harvesting a source of renewable energy. Protects the environment by protecting the drainage and watercourse systems. ...
-
Manufactured by Cleveland Biotech Ltd.based in UNITED KINGDOM
The CBio design team focused on our customer’s need for low staff maintenance, fewer complex elements that could result in callouts and the ability to fit more easily into different ...
-
Manufactured by Recovered Oil Ltd. / Fatstrippa Corp UK Ltd.based in UNITED KINGDOM
Working closely with our suppliers, Recovered Oil have developed a range of Recoil/Fatstrippa units, specified and scaled, for the continuous removal of Fat, Oil and Grease from effluent streams within industrial food processing ...
-
Manufactured by Cleveland Biotech Ltd.based in UNITED KINGDOM
GreaseBeta Traps are the core element of any grease management solution. Simple, discrete and proven they are the most cost effective means of separating grease from an effluent stream. In so doing they prevent fat and food debris from collecting in the drainage network, hence significantly reducing the risk of blockages, infestations and odours. ...
-
Manufactured by Potential Engineeringbased in INDIA
We specialize in the design, manufacture, and installation of oily water treatment systems. We offer a complete range of oil water separator solutions. The wide range of standard capacities is either single-wall or double-wall in construction. We also custom-built oil/water separators to suit your specific requirements. The two types of oil water separator systems are gravity separators and ...
-
Manufactured by LifeQuest World Corpbased in USA
The Goslyn™ Grease Recovery Device is designed to remove FOG (Fats, Oils, and Grease) from wastewater effluent. There are no moving parts to break and no messy, time-consuming grease traps to clean. Plus it's small footprint makes it easy to install in even the smallest prep kitchens. The Goslyn is the ideal separator for Three-Compartment Sinks, Dishwashers, Prep Sinks, Woks, and ...
-
Manufactured by AWAS International GmbHbased in GERMANY
Oil-Water separation acc. to the vortex principle for industrial effluents with oil and grease. (successfully tested and type approved ac. To EN858 class I with less than 5 ppm residual oil) AWAS offers for the first time a flexible solution to suit individual applications - non clogging - no coalescence filter material - no corrugated plates - self cleaning coalescence device - oil collecting ...
-
Manufactured by Fluence Corporationbased in USA
This high-efficiency air flotation system removes fats, oils, and floatable solids from your waste stream. The ZEPHYR induced-air flotation system assists in the removal of fats, oil, and floatable solids by creating fine bubbles that attach to solids and bring them to the surface, making it ideally suited for oil and grease recovery. Clients use the Zephyr induced-air flotation system in pulp ...
-
based in INDIA
Circular & Rectangular ClarifierGeoMiller make clarifiers are highly effective equipments for solid-liquid separation in water and wastewater treatment application, which are manufactured in both circular and rectangular shape. Circular clarifier consist both type central and peripheral driven scraper mechanism included with adjustable V-notch, baffle plate with Scum removal arm & Scum Box in ...
Need help finding the right suppliers? Try XPRT Sourcing. Let the XPRTs do the work for you