Effluent Grease (Grease Treatment) Equipment
-
PremiumManufactured by Toro Equipment S.L.based in SPAIN
and up to 30% percentages of grease and effluent leftovers. Spans of 0.50 to 0.15 millimetres are used. From 30m³/h up to 228 ...
-
Manufactured by Perrier Sorembased in FRANCE
Chain Bar Screen is a leaning trash rake with a rotary chain and downstream screening. Thanks to its teeth which go right through the trash rake rack, it is ideal for difficult effluents carrying grease or fibres. Its unique design enables the immersed part of the drive system, shielded by the trash rake rack, to be protected from effluent ...
-
Manufactured by SFA enviro - Europelec - Aquaturbobased in FRANCE
Diffuser cover made of reinforced polypropylene. Diffuser designed for many various operating conditions: Ideal for Fibre Loaded Sludge, Effluents containing Grease, and Chemical Based wastewater ...
-
Manufactured by Rototec Spabased in ITALY
The grease separator is a physical pre-treatment process that removes oils, foams, greases and all substances of specific weight less than that of the effluent. The grease separator is nothing more than a stilling tank in which the substances of specific weight less than water are separated by floatation (upward flow to the ...
-
Manufactured by Recovered Oil Ltd. / Fatstrippa Corp UK Ltd.based in UNITED KINGDOM
Working closely with our suppliers, Recovered Oil have developed a range of Recoil/Fatstrippa units, specified and scaled, for the continuous removal of Fat, Oil and Grease from effluent streams within industrial food processing ...
-
Manufactured by PS International Incorporated (PSI)based in USA
These oil-water separators include an enhanced arrangement of corrugated coalescing plates that enable the separator to produce a free oil and grease effluent quality of 15 ppm or less. Rectangular design is for above grade to below grade installations in a concrete ...
-
Manufactured by PS International Incorporated (PSI)based in USA
These oil-water separators include an enhanced arrangement of corrugated coalescing plates that enable the separator to produce a free oil and grease effluent quality of 15 ppm or less. Cylindrical design is for direct burial or can also be saddle mounted for above grade ...
-
Manufactured by PS International Incorporated (PSI)based in USA
These oil-water separators include the same corrugated coalescing plate assembly as the PSR Models and also include a highly efficient polypropylene media final polishing coalescer that is designed to remove free oil droplets down to 20 micron in size and produce a free oil and grease effluent quality of 10 ppm or less. Rectangular ...
-
Manufactured by PS International Incorporated (PSI)based in USA
These oil-water separators include the same corrugated coalescing plate assembly as the PS Models and also include a highly efficient polypropylene media final polishing coalescer that is designed to remove free oil droplets down to 20 micron in size and produce a free oil and grease effluent quality of 10 ppm or less. Cylindrical ...
-
Manufactured by Rototec Spabased in ITALY
of the solids and a third outlet zone for the treated effluent. The above ground grease separators are designed to be floor mounted (not buried). Its reduced width allows it to be carried through doorways. In this way, it can be installed in a suitable utility room, cellar, etc… ...
-
Manufactured by AWAS International GmbHbased in GERMANY
Oil-Water separation acc. to the vortex principle for industrial effluents with oil and grease. (successfully tested and type approved ac. To EN858 class I with less than 5 ppm residual oil) AWAS offers for the first time a flexible solution to suit individual applications - non clogging - no coalescence filter material - no corrugated ...
-
Manufactured by Hepburn Bio Care Ltdbased in UNITED KINGDOM
is a powder mix, diluted with water, and used to kick-start biodegrading contaminated or anaerobic greywater in collecting tanks, sewage effluent in sewage plants, grease and fats in galley tanks, grease traps and contaminated bilge water. ...
-
Manufactured by AWAS International GmbHbased in GERMANY
Universal separator with less than 5mg/l final oil content made of stainless steel EN 1.4301/ AISI 304 for free standing installation, in a building or buried tanks. The design permits to have water inlet and outlet either in front or at the side walls. LGA Bayern tested acc. to EN 858 class I with less than 5 mg/l final oil ...
-
Manufactured by Environmental Products and Services Ltdbased in NORTHERN IRELAND
GreaseShield is the only proactive greasetrap in the world to deal with emulsified FOGs. Automatically separates grease from effluent to achieve < 100 ppm FOG Discharge. GreaseShield removes entrained solids to reduce BOD, COD and SS loadings. Eliminates frequent pumping costs, harvesting a source of renewable energy. Protects the ...
-
Manufactured by Presby Environmental Inc. (PEI)based in USA
Presby Environmental’s Newest Product. Exceeds NSF/ANSI Standard 40 Treatment Level Requirements. Ships Easily and Affordably Internationally and Nationally Through All Major ...
-
Manufactured by NuPlanet Sustainable Solutionsbased in IRELAND
The world’s most efficient grease interceptors. The Trapzilla Super Capacity Grease Trap collects free-floating Fats, Oils and Grease (FOG) contained in kitchen drain water flows. As most food service facility managers already know, FOG build-up inside a building’s grease containment system is a major cause of ...
-
Manufactured by FogBusters, Inc.based in USA
The world’s most advanced grease separator; an UNDER THE SINK, inexpensive solution to your kitchen grease ...
-
Distributed by Aqua Mundus Ltdbased in UNITED KINGDOM
The Trapzilla Super Capacity Grease Trap collects free-floating Fats, Oils and Grease (FOG) contained in kitchen drain water flows. As most food service facility managers already know, FOG buildup inside a building’s grease containment system is a major cause of problems due to exterior drain line blockages. These problems jeopardise ...
-
Manufactured by Cleveland Biotech Ltd.based in UNITED KINGDOM
GreaseBeta Traps are the core element of any grease management solution. Simple, discrete and proven they are the most cost effective means of separating grease from an effluent stream. In so doing they prevent fat and food debris from collecting in the drainage network, hence significantly reducing the risk of blockages, infestations and odours. ...
-
Distributed by Aqua Mundus Ltdbased in UNITED KINGDOM
Big Dipper point of source units efficiently servce fixtures such as 1 to 3 compartment sink, pre-rinse station, combi ovens or wok stations. Available in a range fo sizes from 1.26 litres per second up to 3.15 litres ...
Need help finding the right suppliers? Try XPRT Sourcing. Let the XPRTs do the work for you