Grinding Equipment Equipment available in Philippines

Available in Philippines| Near Philippines
239 Results found

We couldn't find any results in Philippines

Here is a list of results available in Philippines

Current filtering criteria

You can remove a filter by clicking on the x
  • Category: Waste & Recycling ×

  • Subcategory: Grinding Equipment ×

  • Available in: Asia & Middle East ×

  • Available in: Philippines ×

Model CT203/CT205 - TR Muncher

by NOV Mono - Mono Pumps Ltd     based in Audenshaw, UNITED KINGDOM

Designed specifically for the efficient maceration of abrasive sludges, the EZstrip CT203/05 TR Munchers are very effective in capturing irregular shaped objects.  The layback cutter shafts on this Muncher are set at an angle to the incoming flow.  If a rejection cycle is necessary, the object can drop into the built-in trash ...

Model YM Series - Pre-grinding Mill

by DSMAC Group     based in Zhengzhou, CHINA

The YM series of pre-grinding mill is designed with a simple vertical structure and features hierarchical crushing, easy operation, low energy consumption and little dust. It is without sieve plate so the problem of blocking is eliminated. The hammerhead uses a hinge structure making it convenient for replacement. Both the hammerhead and scale ...

Model RH1754-160 & RH1754-240 - Horizontal Grinders

by Rayco Manufacturing, Inc.     based in Wooster, OHIO (USA)

Horizontal grinders don’t have to break the bank. The RH1754 is designed to be a productive horizontal grinder priced within the reach of the small contractor. With low operating costs and versatility to process a wide range of materials, Rayco’s RH1754 is the economical solution for reducing green waste, pallets, lumber scraps, etc ...

Model GD - Hammer Mill

by Van Aarsen International     based in Panheel, NETHERLANDS

The GD Hammer mill is designed for grinding raw materials in the animal feed industry. This hammer mill range covers capacities ranging from 10–100 tons per hour, dependent on type of raw material,formula and required grinding structure. The hammer mill can be incorporated in a pre-grinding as well as a post-grinding system as a complete ...

10-Bar Fine Grinder

by Prater Industries     based in Bolingbrook, ILLINOIS (USA)

The 10-Bar fine grinder is for processing materials in explosive environments such as sugar grinding from (4X to 12X) with a single pass mill. These new mills are designed for explosion pressure shock resistance up to 10 bar (145 psi). Ideally, these mills are best suited for heat-sensitive products that require a tight distribution of particle ...

Granutech-Saturn - Model 160H - Roto-Grind Shredder

by Granutech-Saturn Systems     based in Grand Prairie, TEXAS (USA)

The Granutech-Saturn Roto-Grind shredder is a single rotor shredder which utilizes a load sensing feed ram design to continuously supply (unattended) size reduced material for downstream processing. The Roto-Grind shredder uses a solid steel rotor with multiple cutters, adjustable stationary cutters, a large feed hopper and a horizontal feed ram ...

TR - Model CT201 - Muncher

by NOV Mono - Mono Pumps Ltd     based in Audenshaw, UNITED KINGDOM

A new addition to the TR Muncher range has been designed specifically to meet on-site tanker discharge requirements and sludge/fat processing, for maceration of solids within the flow and protection of downstream equipment from blockages. Installation of the new CT201 TR Muncher is simple, with in-line flanges or the option of tanker coupling ...

EKOTON - Model Grizzly - In-channel Grinders RKD “Grizzly”

by EKOTON Industrial Group     based in Belgorod, RUSSIA

Grinder screens are intended for big and average wastes grinding, which came with sewage flow to sewage pumping stations.Installation of the grinders at the sewage pumping stations is the most effective way to protect pumps and completely solves the problem of removal and disposal of retained garbage.In-channel grinders are made entirely of ...

Hopper Fed Low RPM Grinders

by West Salem Machinery Co.(WSM)     based in Salem, OREGON (USA)

WSM’s Hopper Fed Grinder is a must-have complete grinding system for a wide range of operations. Specifically designed for industrial users, WSM’s rugged grinders deliver the performance that makes your job faster and easier. From “dump’n’go” batch feeding – to automatic unmanned operation – to easy ...

NETZSCH M-Ovas - Grinding System

by NETZSCH Pumpen & Systeme GmbH     based in Waldkraiburg, GERMANY

NETZSCH M-Ovas grinding systems can be used wherever it is essential that solid matter in fluids be broken down reliably to ensure the prevention of pipe clogging and damage to downstream equipment. The special design of the M-Ovas housing carries the solids in the wastewater flow to the cutting plate, where they are held and chopped by rotating ...

Model Series A - Muncher

by NOV Mono - Mono Pumps Ltd     based in Audenshaw, UNITED KINGDOM

The reliable Series 'A' Muncher is well proven in its ability to effectively macerate raw sewage, sludges, sewage screenings and industrial process flows. Available for pipeline or channel installations, the shaft speed of 85 rpm offers low cutter tip speeds and therefore dramatically reduces wear rates in comparison to high speed macerators. The ...

TR - Muncher

by NOV Mono - Mono Pumps Ltd     based in Audenshaw, UNITED KINGDOM

Designed specifically for the efficient maceration of abrasive sludges, the TR Muncher is very effective in capturing irregular shaped objects. The layback cutter shafts on this Muncher are set at an angle to the incoming flow. If a rejection cycle is necessary, the object can drop into the built-in trash trap set clear of and below the cutter ...

Columbia Steel - Double Beam Grates for Metal Shredders

by Columbia Steel Casting Co., Inc.     based in Portland, OREGON (USA)

Columbia Steel double beam grates shred against hammers with minimal flexing and bowing. Our parts maximize throughput and density with designs made to match your rotor for optimum efficiency.

Biomass Grinding for Biofuel

by Warren & Baerg Manufacturing     based in Dinuba, CALIFORNIA (USA)

Fossil Fuel has been used traditionally because of its low cost and availability. Now growing biomass for fuel is becoming more cost effective than in the past.

Diamond Z - Model 1463B - Tub Grinder

by Diamond Z     based in Caldwell, IDAHO (USA)

The 1463B is the standard by which all tub grinders are measured. No other grinder can match its power, (up to 1,650 horsepower) production, or its versatility. It grinds wood waste, green waste, and even tires at unparalleled rates. Since the first one produced in 1988, the 1463B has continued to out-perform the competition, resulting in the ...

Model RH1754-160 & RH1754-240 - Horizontal Grinders

by Rayco Manufacturing, Inc.     based in Wooster, OHIO (USA)

Horizontal grinders don’t have to break the bank. The RH1754 is designed to be a productive horizontal grinder priced within the reach of the small contractor. With low operating costs and versatility to process a wide range of materials, Rayco’s RH1754 is the economical solution for reducing green waste, pallets, lumber scraps, etc ...

Taskmaster - Model TM Series - High Flow Channel Grinder

by Franklin Miller Inc.     based in Livingston, NEW JERSEY (USA)

The TASKMASTER TITAN is a unique, high flow channel grinder. This TASKMASTER TITAN’S industrious twin shaft design features one over-sized cutter stack that allows for an increase flow capacity, while still maintaining the TASKMASTERS unsurpassed grinding performance. It does all of this with impeccable energy, efficiency and industry ...

SB - Muncher

by NOV Mono - Mono Pumps Ltd     based in Audenshaw, UNITED KINGDOM

Designed as an effective sewage grinder and to replace high speed macerators, the SB Muncher can save up to 85% of the energy requirements of a centrifugal force system. Typically it has a cutting tip speed 90% less than a high speed macerator system and also much lower vibration and noise levels. Being of a compact size for the smaller capacity ...

KAHL - Pan Grinder Mill

by Amandus Kahl GmbH & Co. KG     based in Reinbek, GERMANY

To Prepare Quality Pellets - Wood shavings, sawdust, wood chips, and other lumpy biomass are crushed in an eco-friendly way using the KAHL pan grinder mill.

Model MG-B series - Grinding Systems

by G.T.S. Grinding Srl     based in Gavirate, ITALY

The bestseller version of the classifier mill for flue gas treatment and micronization of Sodium Bicarbonate and Trona. The grinding in MG-B Series classifier mills takes place by high peripheral impact with fixed grinding tools in a circuit closed by a dynamic classifier.At the entrance of the grinding chamber, the material to be processed is ...

Need help finding the right suppliers?

Let the XPRTs do the work for you