Grinding Equipment services for Waste and Recycling available in Haiti

  • Premium

    Feed Water and Pre-Treatment Tests for Laboratory Service

    In order to optimise the operation of a membrane plant it's essential to fully understand the chemical nature of the feed water. From statistical analysis of the results of membrane autopsies we've carried out over the past ten years, we have concluded that more than 50% of membrane fouling and failure events result from inadequate pre-treatment. ...

    By Genesys International Limited based in Middlewich, UNITED KINGDOM.

  • Premium

    Pre-Engineering Service

    CTP offers the following services in Pre-Engineering: Feasibility Studies, Layouts, Cost Estimation, P+I Diagrams, HAZOP Studies.

  • Premium

    Pre-Treatment for Desalination

    For desalination plants it is of great importance of the operation of the entire plant that good pre-treatment of water takes place before the salt is removed. For reverse osmosis (RO) desalination plants, satisfactory pre-treatment is essential for avoiding membrane fouling. Membrane fouling may result in reduced water ...

    By Filtralite - Leca Norge As based in Alnabru, NORWAY.

  • (Pre-) Construction & Project Management Services

    Our target is to provide our customers with complete solutions and the realization of a project – be it an Engineering, Procurement, Construction (EPC) or an Engineering, Procurement, Construction Management (EPCM) solution. Further to design, construction and commercial management this includes site safety management, cost control, ...

    By M+W Group GmbH based in Stuttgart, GERMANY.

  • Size Reduction Services

    Our customers turn to Ingenia as a leader in thermoplastic ambient grinding. From producing the smallest possible product to obtaining a specific particle size, we can produce the full range of powders demanded by your application in rotomolding, powder coating, compounding and dispersions. Particle size distribution and morphology (shape) are ...

    By Ingenia Polymers Corp. based in Houston, TEXAS (USA).

  • Test and Hire Services

    At its own headquarters G.T.S. has an industrial grinding test equipment for the evaluation of the manufacturing capacity and the study of the most suitable solutions for the Customer’s products and special requests. In order to test the machine in actual conditions of use G.T.S. provides a pilot equipment equipped with classifier mill, fan ...

    By G.T.S. Grinding Srl based in Gavirate, ITALY.

  • Installation Services

    Our systems are pre-engineered and pre-assembled. Our systems are designed so that on-site assembly is kept to a bare minimum. We can install a complete wastewater plant in one day, and have you saving money on chemistry and discharge fees by that evening.

    By Clean Water Technology, Inc. based in Los Angeles, CALIFORNIA (USA). from Installation Services Service line

  • Back Grinding Services

    Back grinding is a process that removes silicon from the back surface of a wafer.  SVM provides grinding on our own substrates or on customer supplied wafers. We process bare and device patterned wafers with high yield and offer wafer thinning to customer specifications.

    By Silicon Valley Microelectronics, Inc. (SVM) based in Santa Clara, CALIFORNIA (USA). from Back Grinding Services Service line

  • Vulcan® - Engineering and Design

    Vulcan® Systems engineers specialize in ensuring that each system that leaves our premises works as defined by the client, and for those need less customization, a pre-designed standardized unit is available.

    By Vulcan Systems based in Moberly, MISSOURI (USA).

  • Initial and Comprehensive Trials at Jehmlich Testing Facility Services

    Your processing tasks in conveying, grinding, crushing, dosing and classification are our daily professional challenge. We evaluate all quality-critical processes. We analyze and optimize singular processing steps through trials in our Testing Facility.

    By Gebr. Jehmlich GmbH based in Nossen, GERMANY.

  • Special Services

    Preparation for export. Pre-delivery inspections. Initial FMCSR 396 DOT inspection.

    By Western Star Trucks based in Portland, OREGON (USA).

  • Pump Mapping Services

    SPP Energy offers a range of pre prepared training packages and can tailor specific training programs to suit your requirements.

    By SPP Pumps Limited based in Theale Reading, UNITED KINGDOM. from Pump Mapping Services Service line

  • Environmental Monitoring Services

    Environmental monitoring is performed to meet the requirements of quality system regulation when such an environment can influence the pre-sterilization bioburden level or resistance on a medical device.

    By North American Science Associates Inc.(NAMSA ) based in Northwood, OHIO (USA).

  • Reach-Late Pre-Registraton Services

    Pre-registrations the process by which a potential Registrant of a phase-in substance submits the required information to ECHAPre-registrations the process by which a potential Registrant of a phase-in substance submits the required information to ECHAPre-registrations the process by which a potential Registrant of a phase-in substance submits the ...

    By Shanghai ETM Material Technical Co.,Ltd based in Shanghai, CHINA.

  • Pallet Grinding

    WSM is the leader in supplying pallet and wood waste grinding systems to the pallet industry. From our High Torque Grinders in both hopper feed and horizontal feed configurations — to high volume fiber processing systems with Horizontal Hogs — to the 'Brute' portable grinder, WSM provides effective solutions for converting expensive ...

    By West Salem Machinery Co.(WSM) based in Salem, OREGON (USA).

  • Pre-Blast/Pre-Construction Inspections Service

    Pre-blast and pre-construction inspections are the first look at a house, apartment or commercial building adjacent to your project site. Establishing an accurate baseline of the structure's conditions provides the property owner and the project with the same starting point. As a public relations tool, inspections at the start of a project ...

    By GeoSonics/Vibra-Tech Inc. based in Warrendale, PENNSYLVANIA (USA).

  • Pre-Engineering

    Optimisation starts with a rough planning of the project. In cooperation with you, we develop the basis for making a decision on the required solution approach.

    By Straub Werke AG based in Wangs, SWITZERLAND.

  • Pre-After Sale Services

    True to the company's mission, 'supply worldwide reliable power solutions with continuous innovative technologies,' EverExceed always attaches the most importance to the satisfaction of the customers. We have a bridle-wise professional service team to provide worldwide service. Quick response, right solution and efficient on-site disposal are our ...

    By EverExceed based in Denton, UNITED KINGDOM.

  • Customer Sample Preparation

    We offer to prepare your production sample on our sample preparation machines for demonstration purposes, supplying you with your own material and the preparation procedure for your inspection. This is possible for your OES-samples, e.g. grinding of your iron base samples or milling of your non-ferrous samples. We furthermore can prepare your ...

    By LGC Standards GmbH based in Wesel, GERMANY.

  • Inspection and O&M Service

    Inspection in workshops, Non Destructive Tests (NDT), Inspection during operation, QA/QC, Pre commissioning and commissioning, Start up / Operation and maintenance.

    By Venezolana de Proyectos Integrados, C. A. (VEPICA) based in Caracas, VENEZUELA.

Need help finding the right suppliers? Try XPRT Sourcing. Let the XPRTs do the work for you