Halogenated Waste Equipment For Waste And Recycling Available In Maryland
-
Manufactured by IPECbased in USA
The process is based on low-temperature pyrolysis principle, involving the use of heat to thermally decompose hydrocarbon-based material in the condition of oxygen ...
-
Manufactured by Callidus Technologies - part of UOP, a Honeywell Companybased in USA
Our Halogenated Waste Thermal Oxidizer Systems can meet destruction efficiencies up to 99.99%. Operating temperatures range from 1500ºF – 2200ºF with residence times of 1.0 -2.0 seconds depending on the destruction efficiency required. Systems may utilize a direct quench or a boiler following the combustion process. An optional acid absorber may produce a diluted or concentrated ...
-
Manufactured by IPECbased in USA
The process is based on low-temperature pyrolysis principle, involving the use of heat to thermally decompose hydrocarbon-based material in the condition of oxygen deficit. ...
-
Manufactured by CTP America Inc.based in USA
The MultiTherm safely removes highly contaminated, i.e. halogenous, waste gas streams and liquid waste as well as wastewaters especially in the pharmaceutical, chemical and petrochemical industry. CTP‘s MultiTherm is a combined process in air purification. It consists essentially of a thermal oxidation and one or more upstream or downstream processes fitted to the application. These ...
-
Manufactured by Dexsil Corporationbased in USA
Quantitative (Laboratory) Test for Chlorine in Used Oil - (potentiometric end point). Laboratory Test for Total Halogens, (chlorine), in Used (waste) Oil. If you have a laboratory available and want to obtain optimal precision in your chlorine testing, then the Titra-Clor laboratory kits may be the preferred method. The Titra-Clor kits use chemistry similar to Clor-D-Tect, but because the sample ...
-
based in AUSTRIA
For safe removal of highly contaminated, i.e. halogenous, waste gas streams and liquid waste as well as wastewaters, especially in the pharmaceutical, chemical and petrochemical industry. CTP‘s MultiTherm is a combined process. It consists essentially of a thermal oxidation and one or more upstream or downstream processes fitted to the application. These could be heat recovery, wet ...
Need help finding the right suppliers? Try XPRT Sourcing. Let the XPRTs do the work for you