Hammer Mills Applications available in Fiji
-
Premium
Recycling equipment for shredding electronic scrap (E-scrap)
Processing electronic scrap (E-Scrap or WEEE) presents special challenges. Computers, consumer electronics, and IT equipment need to be destroyed to extract recyclables or ensure the security and complete destruction of the product. Hard drives, tapes and data storage devices must be completely destroyed to provide data security. And, while many electronic scrap items do not require the specific size reduction that hard drives or other data storage devices require, all electronic scrap includes recoverable ...
By Granutech-Saturn Systems based in Grand Prairie, TEXAS (USA).
-
Premium
Recycling equipments for white goods
Granutech Saturn Systems design and manufacture white goods shredders and systems capable of sorting the ferrous fraction from the fluff and can equip these with eddy current and other finder technology to sort aluminum, stainless, and other recoverable ...
By Granutech-Saturn Systems based in Grand Prairie, TEXAS (USA).
-
Premium
Recycling equipments for shredding scrap metals
Scrap metal includes metals that can be reclaimed for use in manufacturing, processed for re-melting or prepared for disposal in landfills. These metals include industrial scrap metal and remainders, electronic scrap, aluminum and precious metals. Shredders prepare the metals for bailing and bundling, saving storage space, transportation and disposal costs. Quad shaft shredders reduce and separate electronic scrap and prototypes in one process, allowing for the recovery of precious metals. Dual or quad shaft ...
By Granutech-Saturn Systems based in Grand Prairie, TEXAS (USA).
-
Premium
Recycling equipments for ferrous scrap metal shredding & recycling
Ferrous scrap metal includes metals that can be reclaimed for use through traditional ferrous scrap recovery systems. These metals include a wide variety of light ferrous scrap such as sheet steel, 55 gallon drums, white goods, and other forms of loose tin. Heavier ferrous scrap can be processed through the Saturn hammermill line of shredders which also produce a more consistent, higher density shred. Shredders prepare the metals for further separation or directly to end ferrous scrap consumers. Additional ...
By Granutech-Saturn Systems based in Grand Prairie, TEXAS (USA).
-
Premium
Recycling equipments for non-ferrous scrap metal shredding & recycling
Non-Ferrous Metal Recycling is a large industry focusing on the recovery of metals such as aluminum, brass, copper, and even precious metals from electronic scrap. The applications and needs of non ferrous metal recyclers vary greatly. These can include a large corporate recycler buying UBC bales for shredding to be converted back into beverage cans or a small recycler who is recovering precious metals from circuit boards or catalytic ...
By Granutech-Saturn Systems based in Grand Prairie, TEXAS (USA).
-
Special plants for recycling of scrap metals
The processing of scrap metal is closely related to the steel industry. For this reason, it is essential to obtain a uniform output material with a high specific weight. Forrec's metal scrap shredders use efficient shearing machines and hammer mills to achieve a reduction in volume, making the product shovelable. Processing focuses on safety, the wear and tear of the plant, and electricity ...
By FOR REC S.P.A. based in Santa Giustina in Colle, ITALY.
-
Shredding solutions for Aluminum SWARFS
The aluminum industry recovers much of the material required by reprocessing machining waste. In order to re-use this kind of waste as the second material, it is necessary to obtain in a suitable size for the subsequent processing stages with briquetting or hammer mills. SatrindTech proposes two-shaft shredders for the volume reduction of the hanks and three- and four-shaft shredders for the subsequent shredding step for obtaining a controlled size of the ...
By SatrindTech Srl based in Arluno, ITALY.
-
Shredding solutions for Metal SWARFS
The metal industry recovers part of the material by reprocessing machining waste. In order to re-use this kind of waste as the second material, it is necessary to obtain in a suitable size for the subsequent processing stages with briquetting or hammer mills. SatrindTech proposes two-shaft shredders for the volume reduction of the hanks and three- and four-shaft shredders for the subsequent shredding step for obtaining a controlled size of the ...
By SatrindTech Srl based in Arluno, ITALY.
-
Recycling equipments for shredder light fraction (SLF) recycling
Dismantled ELVs (End of Life Vehicles) are sold to shredder operators and are reduced to fist-size pieces by large rotating hammer mills. The Shredder Light Fraction (SLF) is removed from the stream by suction, the intensity of which determines the amount and composition of the SLF. SLF consists essentially of plastics/rubber (~60%), Glass/sand i.e. mineral substances (~15%), Textiles/leather/wood (~10%), Paint dust/rust (~10%) and Residual metals (~5%). Other names for SLF are ASR (Automobile Shredder Residue) ...
By Eldan Recycling A/S based in Faaborg, DENMARK.
-
Hammermill Shafts for Shredding Car Bodies
Schmachtenberg specializes in the production of very high-quality hammermill shafts for shredding car bodies. Our hammermill shafts greatly reduce material wear, supporting optimal service life for recycling machines. We produce hammermill shafts for machines by Metso Lindemann, Danieli Lynxx, Henschel, Hoffmann, Newell Equipment, and ...
By Schmachtenberg & Steinstosser - Buchholz Group based in Remscheid, GERMANY.
-
Shredders and crushers for refrigerator recycling sector
Several million scrap refrigerator units are disposed of every year in Germany alone. The proportion of refrigeration units recycled by volume totals about 40% and is the most significant segment after consumer electronics. One particular challenge in this recycling process is presented by chlorofluorocarbons such as R 11, R 12 or R 141b, which were used for decades as foaming agents for insulation materials. Since these substances damage the Earth’s ozone layer when released, they must be removed and ...
By Erdwich Zerkleinerungs-Systeme GmbH based in Igling, GERMANY.
-
Pellet Production Line
Shandong Hanyu Environmental Equipment Co., Ltd is the professional manufacturer of complete pellet production line. The complete pellet production line includes biomass fuel pellets, feed pellets, organic fertilizer pellets, fuel pellets, and feed pellets production line. We produce all machines for making pellets, such as different kinds of crusher, wood chipper machine, hammer mill, rotary dryer, cooler, pellet machine, screener, packing machine, biomass pellet burner etc. ...
By Shandong Hanyu Environmental Protection Equipment Co., LTD based in Jinan City, CHINA.
-
Industrial shredding solutions for wood industry
Wood is one of the most common materials put into industrial shredders. Depending on the combination of shredders you use, you could end up with wood chips or sawdust. Using our hydraulic press, you can convert your wood scraps into high value briquettes. Wood is a valuable material that can be used down to the last chip. Our single and double shaft shredders are ready to turn your wood chips and other waste into briquette material. This means you’ll increase storage room, reduce transportation costs, and ...
By UAB UMP Technika based in Ukmerge, LITHUANIA.
Need help finding the right suppliers? Try XPRT Sourcing. Let the XPRTs do the work for you