Hazardous Waste Disposal Applications available in Latin America
-
Premium
Waste Disposal System for Hazardous Waste
Harden introduced European hazardous waste shredding system in the early stage, and conducted several years of independent research and development according to cases experience. At present, there are nearly 100 successful cases of hazardous waste processing project made by Harden, including reliable hazardous waste shredder, full set of hazardous waste shredding and fire extinguishing system and full set of SMP hazardous waste processing system. Harden has an in-depth research on the details of hazardous waste ...
By Harden Machinery Ltd. based in Zhongshan City, CHINA.
-
Premium
Rapid analysis of total mercury in waste waters and process waters with elevated mercury content using direct pyrolysis technique
Introduction A conventional standard method of total mercury det ermination in water using atomic absorption spectrometry (AAS) involves preliminary sample digestion that ta kes from 30 minutes to 8 hours depending on the digestion conditions. The use of a mercury analyzer RA-915M/RA-915+ with Zeeman background correction in combination with PYRO-915+ pyrolysis attachment provides direct dete rmination of mercury in process and waste waters contaminated with mercury without digesti on or any other sample ...
By Lumex Instruments based in Mission, BRITISH COLUMBIA (CANADA).
-
Premium
Dose Rate & Survey Meters for Radioactivity measurement & characterization of high-contaminated waste
Control of high radioactivity levels can be done only with dedicated instruments able to measure radiation up to 300 ...
By Bertin Technologies based in Montigny-le-Bretonneux, FRANCE.
-
Premium
Coronavirus Incinerators
Incinerators are the only way to effectively destroy all infected and contaminated waste generated by Coronavirus sufferers. The key benefit of incineration over all other waste management facilities is its superiority in ...
By Inciner8 Limited based in Southport, UNITED KINGDOM.
-
Premium
Water Testing for Automatic Rinse Tank Controls
Proper rinsing is one of the most important steps in quality manufacturing or metal finishing. Plenty of low cost, good quality water for rinsing has been available in the past, so rinse water conservation has been largely ignored. Today, this is no longer true. Tap water costs have increased dramatically. Various new regulations are now in effect which limit the allowable volume of wastewater. Others require wastewater treatment. Still other laws tax the amount of water going down the sewer. These factors have ...
By Myron L Company based in Carlsbad, CALIFORNIA (USA).
-
Premium
Analytical Instruments for Analyzing by-Products, Effluents and Waste
Discover analysis and sample preparation solutions for environmental sum parameters like TOC, AOX, EOX, TX, TOX, TC, TS and many more, for cooling and waste water, contaminated soil, brine, and other process relevant matters like catalysts, waste oil, residues among others. These solutions can be applied in environmental protection, industrial self-control for effluents, recycling, regeneration, and ...
By Analytik Jena - an EndressHauser Company based in Jena, GERMANY.
-
Premium
Recycling equipments for shredding hazardous waste
The disposal of hazardous waste requires special handling to ensure that safety and regulatory requirements are met. Preparing the waste for incineration or burial requires equipment that is durable and reliable so that the materials are processed safely and in accordance with the regulatory ...
By Granutech-Saturn Systems based in Grand Prairie, TEXAS (USA).
-
Premium
TANA Shark Industrial Waste Shredder for Material Recovery & Re-use- End-of - Commercial and Industrial Waste, Plastics
Commercial and industrial waste typically contains different kinds of packaging materials, like hard and soft plastics, cardboard, paper, wires, paper rolls, containers, aluminium, gypsum or any reject from production line of a manufacturing process, sand paper for instance. In other words, a wide variety of different kinds of materials with various requirement to the machines it is treated with. TANA shredders are widely used in treatment of this variety of ...
By Tana Oy based in Jyvaskyla, FINLAND.
-
Premium
High-quality shredding solutions for hazardous waste disposal & recycling shredders sector
In order to dispose of and recycle hazardous waste, special precautions must be adhered to. Before the hazardous waste can be disposed of, the materials should be thoroughly reduced and preprocessed. Household waste, solid waste, empty or filled drums, aerosols, paint, radioactive waste, ammunition, and more are just some examples of hazardous materials that can cause damage to ecosystems and society if not handled and disposed of with proper care. Municipalities and local governments have strict regulations in ...
By 3R-Machinery (by Shred-Tech) based in Raleigh, NORTH CAROLINA (USA).
-
Instrumentation technologies for refineries
The petroleum refining industry uses a wide range of processes, from separation, petroleum conversion, and petroleum treatment to waste water management. Each of these processes has its own challenges and all are made more complex by the variety of products and contaminants in the process. Two key areas, from the water management perspective, are cooling water and waste water treatment. ...
By Advanced Sensors Ltd. - part of PAC L.P. based in Carrickfergus, UNITED KINGDOM.
-
Mercury Waste Plants for Oil & Gas Industry
Mercury-contaminated wastes are a major challenge for many industries including the chlorine industry, oil & gas drilling, oil & gas refineries (catalysts) and fluorescent lamps recycling. Due to strict legal restrictions and HSE requirements, mercury-contaminated waste is required to be handled with special care. We at econ industries have the best solution for each specific mercury waste stream, with plants that are recognised as being state of the art from approval authorities ...
By econ industries services GmbH based in Starnberg, GERMANY.
-
Balers And Waste Compactors for Marine and Offshore Industry
To put valuable space to optimal use is one of the top priorities aboard ships and in an offshore environment. Another challenge at sea is to reduce high waste disposal ...
By Orwak AB based in Sävsjö, SWEDEN.
-
Industrial incineration solutions for the thermal desorption, contaminated soil remediation sector
Petroleum, fuels & derivatives. Inorganic pollutants & Heavy metals. Volatile Organic & Semi-volatile Compounds (PCBs, VOCs & SVOCs). Solvents, thinners. Pesticides, herbicides & ...
By Dutch Incinerators BV based in Terneuzen, NETHERLANDS.
-
Hazardous waste treatment solutions for oil and gas industry
There are a wide amount of applications for our VacuDry® process within the oil and gas industry. A large variety of wastes and by-products that are generated in the oil & gas production chain can be treated effectively and sustainably. In past decades, numerous thermal desorption processes have been implemented worldwide, using a variety of heating chamber designs to separate hydrocarbons from the mineral solids. Such standard TDUs work under atmospheric pressure which can lead to safety risks, high ...
By econ industries services GmbH based in Starnberg, GERMANY.
-
Liquid/solid separation equipment for remediation pollution treatment
Landfills are categorized by regulations in three types: industrial, municipal, and hazardous. Individual landfills may be further differentiated by the types of waste which they accept. All landfills are required to be capped, usually occurring at the end of each day. The cap is typically 6-8” of soil. The cap reduces odor and loss due to wind. At the closing of the landfill, a permanent cap consisting of a membrane and more soil is added. Before the landfilling operation begins, an ...
By WesTech Engineering, LLC based in Salt Lake City, UTAH (USA).
-
Waste Management Solutions for Metal Manufacturing Industry
There are several challenges faced by the metal manufacturing industry. Firstly, there is a drive to recover as much metal credit as possible before disposal of by-products as wastes. Secondly, there is a requirement to minimise waste generation or alternatively minimise the costs of managing the disposal of any hazardous waste material generated during the manufacturing process. Finally, keeping the company competitive by generating value or by reducing costs in the manufacturing process. Any solutions that can ...
By Tetronics Technologies Limited based in Swindon, UNITED KINGDOM.
-
Waste recovery for construction industry
Construction waste consists of unwanted material produced directly or incidentally by the construction industry. This includes materials that may contain lead, asbestos or other hazardous materials. There is increasing pressure on the construction industry to dispose of this hazardous material in an environmentally responsible manner. Tetronics can help alleviate this pressure by providing waste recovery plants to deal with all types of hazardous wastes generated from a construction projects lifespan: from land ...
By Tetronics Technologies Limited based in Swindon, UNITED KINGDOM.
-
Intelligent compliance solutions for retail industry
Retailers are increasingly challenged with meeting EHS regulatory compliance obligations and an intense consumer demand for safer, more environmentally-friendly products. Nearly every aspect of a retailer's business is impacted by EHS compliance, which requires knowledge and expertise that is far from a core skill set possessed by most of a retailer's workforce. From sourcing products, to distribution and logistics, to employees handling regulated products, to the proper disposal of hazardous waste, a long list ...
By 3E - SDS and EHS Compliance Data Management Solutions based in Carlsbad, CALIFORNIA (USA).
-
Activated carbons for water purification - aquariums sector
Granular Activated Carbon (GAC) is used in filter systems or embedded in filter floss type units where aquarium water is pumped through the filter bed and a pre and/or post filter pad removes suspended solids. Puragen Activated Carbons offers industry-leading, premium-grade GAC with low phosphate levels and exceptional porosity and surface area to promote a healthy aquatic ...
By Puragen Activated Carbon based in Palm Beach Gardens, FLORIDA (USA).
-
Activated carbons for water purification - process water industry
Process water is a broad term that covers many applications such as product water for bottlers, brewers and fruit juice, boiler water, wash water, and any other water used in processing or as part of the end product. Because there are so many applications in this arena with various chemicals and compounds that need to be removed, Puragen Activated Carbons offers products with the correct sizing, purity, and activity level needed for the ...
By Puragen Activated Carbon based in Palm Beach Gardens, FLORIDA (USA).
Need help finding the right suppliers? Try XPRT Sourcing. Let the XPRTs do the work for you