Only show results available in Connecticut? Ok

Hazardous Waste Incineration Applications

  • Premium

    Gas analyzers and monitoring systems for waste incineration sector

    Waste-to-energy (WtE) or energy-from-waste (EfW) through incineration of waste is on the one hand an effective way of producing electricity and heat, while on the other hand it is disposing of possibly hazardous or unrecyclable waste. Its purpose is not to compete with waste recycling, reuse and prevention, but to complement them. After all, incineration not only reduces the amount of hazardous waste, but may also generate energy through the gases released in the process. Read about our solutions for waste-to-energ...

    By Gasmet Technologies Oy based in Vantaa, FINLAND.

  • Premium

    Air pollution control solution for incineration sector

    Waste incineration, such as sewage sludge, municipal solid waste and hazardous waste incineration are areas under particular scrutiny by regulators because of their multiple toxic pollutants. The Clean Air Group, LLC has been selected by several hazardous waste facilities to design and build integrated multiple pollutant air pollution control systems to replace existing scrubber systems to meet the new Maximum Achievable Control Technology (MACT) standards. In several instances, only a scrubber was required, in...

    By CR Clean Air Group, LLC based in Parsippany, NEW JERSEY (USA).

  • Premium

    Shredder solutions for the hazardous waste processing sector

    Hazardous waste processing is a challenging work, it is important the disposal of hazardous waste is both extremely safe and reliable. Shredding machine is one of most vital part in hazardous waste processing. HARDEN manufactures hazardous waste shredders for hazardous waste processing. Such as radioactive waste, steel drums containing hazardous materials or bacterially contaminated medical waste. Our single-shaft shredders are particularly suitable for shredding large volumes of hazardous waste for disposal in...

    By Harden Machinery Ltd. based in Zhongshan City, CHINA.

  • Premium

    Air pollution control solution for cement industry

    The fundamental ingredient in concrete is portland cement. The cement manufacturing process requires a great deal of energy to heat the mixture of raw materials in a cement kiln. The main source of toxic emissions from a portland cement plant is the kiln. The treatment of kiln exhaust is similar to most incinerators processes. Scrubbers are the best choices for control of acid gases, fine particulate, heavy metals as well as dioxin and furans. The MACT II regulations, yet to be finalized, for cement kilns are...

    By CR Clean Air Group, LLC based in Parsippany, NEW JERSEY (USA).

  • Premium

    Recycling equipment for waste-to-energy recycling

    Granutech has products that are well suited to process materials with the ultimate goal of producing energy from waste.

    By Granutech-Saturn Systems based in Grand Prairie, TEXAS (USA).

  • Premium

    Hazardous and Medical Waste shredder

    HARDEN designs and manufactures shredders and size reduction systems for safe disposal of hazardous, medical and pharmaceutical waste. HARDEN has extensive experience in the supply of purpose engineered reduction, fuel blending and destruction systems for the hazardous and medical waste processing industries.

    By Harden Machinery Ltd. based in Zhongshan City, CHINA.

  • Premium

    Hazardous waste incinerators for medical sector

    Our range of hazardous waste incinerators are specially designed to cope with ALL kinds of medical and hazardous waste in ALL climates and conditions. Our products ensure efficient, clean and hassle-free disposal of hazardous waste is possible. These models are suitable for the incineration of clinical waste including type 4 pathological waste (red bag waste) from Hospitals, Research Centres, Pharmaceutical Companies , Drug Manufactures, Primary Care Trusts, Private GPs Practices, Cosmetic Surgery Clinics,...

    By Inciner8 Limited based in Southport, UNITED KINGDOM.

  • Premium

    Activated carbons solutions for flue gas & mercury sector

    In many industrialized nations it is common practice to use incineration methods for waste disposal. There are also ways to recover energy from the process. However, operating an incinerator requires strict adherence to environmental regulations. Hazardous, clinical and waste to energy incinerators can benefit from our EcoSorb range of activated carbon. Specially designed to adsorb unwelcome airborne compounds from flue gases.

    By Jacobi Group based in Kalmar, SWEDEN.

  • Premium

    Continuous Metals Stack Monitor (CEMs)

    Cooper Environmental`s Xact® 640 has the unique ability to generate high time resolution metals measurement in stacks. This unique capability has the potential to qualify as a substitution for the combination of a Hg/ PM CEMs application as well as the potential for a pollution control system feedback loop that could result in the reduction of pollution control consumables. Our systems have been site certified for compliance measurements at hazardous waste incinerator and secondary lead smelter sites.

    By Cooper Environmental Services based in Tigard, OREGON (USA).

  • Premium

    Environmental solutions for the waste incineration industry

    Multi-pollutant abatement systems. Different Categories of Waste Incineration: From a regulatory standpoint, the industry is divided into a number of categories: commercial/industrial solid waste incinerators (CISWI), municipal waste combustors (MWC), hospital/medical/infectious waste incinerators (HMIWI), hazardous waste combustors (HWC), sewage sludge incinerators (SSI), and other solid waste incinerators (OSWI). While each sub-category is subject to differing environmental regulations, all can benefit from...

    By Dürr Systems, Inc. based in De Pere, WISCONSIN (USA).

  • Premium

    Small medical incinerators for health clinics and labs

    Clinical waste is costing more and more to dispose of safely. Health Clinics and Health centres can now handle their own waste streams using one of our specialist medical incinerators. Destroying hazardous waste at source is by far the most effective and efficient way of handling waste that could potentially spread diseases or viruses.

    By Inciner8 Limited based in Southport, UNITED KINGDOM.

  • Industrial Solution for incineration & thermal treatment

    Waste incineration, including solid municipal and hazardous waste, biomedical waste and hazardous liquid are all continually under more stringent scrutiny by regulators. Macrotek has designed and supplied many integrated systems to meet most guidelines. In several installations, hazardous waste has been combined with radioactive waste, requiring nearly non-detectable emission levels for many of the contaminants. Macrotek has installed and tested systems for these processes with the results significantly better...

    By Macrotek Inc. based in Markham, ONTARIO (CANADA).

  • Gas phase reduction technology solutions for military waste sector

    The Natural Energy Solution uses a proprietary, patented process called Gas Phase Reduction (”GPR”). This is a highly effective, non-incineration method that destroys all hazardous organic waste. The Natural Energy Process is a proven, non-incineration technology for the destruction of hazardous organic chemicals on a full commercial scale.

    By Natural Energy Systems Inc. (NES) based in Burlington, ONTARIO (CANADA).

  • High-calcium lime slurry for environmental reclamation industry

    Lime slurry can be easily applied to rough terrain with a fine spray, minimizing waste and dust migration while providing a much safer, cost effective alternative. Flue gas treatment for industrial facilities and hazardous waste incinerators.

    By Sudbury Lime Ltd. based in Copper Cliff,, ONTARIO (CANADA).

  • Applications and Air Pollutants Removed in the Chemical, Pharmaceutical and Plastics Industries

    Supplying for over 35 years reliable air pollution control equipment and systems for removal of all gaseous compounds, particulate and odors from chemical process operations, reactors, dryers, calciners, membrane cells, pharmaceutical reactors and tablet dryers, crystallizers, vessel filling and storage vent emissions, emergency scrubbing of high concentration gas releases from cylinders, vacuum pump emissions, Quench /scrubber systems for acid gases and particulate from high temperature thermal oxidizers....

    By Bionomic Industries Inc. based in Mahwah, NEW JERSEY (USA).

  • Shredding solutions for SRF (specified recovered fuel) sector

    The SRF (Solid Recovered Fuel / Specified Recovered Fuel) is a fuel produced by shredding and dehydrating MSW (plastic, paper, textile fibers, etc.), of non-hazardous waste (both urban and special) through appropriate treatments from other non-combustible materials, such as glass, metals and inert.

    By SatrindTech Srl based in Arluno, ITALY.

  • Scrubber systems for Chemical, Mineral, and Pharmaceutical Processing

    Scrubber systems for chemical, mineral, and pharmaceutical processing encompass a wide range of exhaust sources, pollutants, and scrubber technologies. There is no one size fits all for these industries. Envitech wet scrubber technologies are found in several chemical processing facilities around the country that includes companies like Dow Chemical, Dupont, Eastman Chemical, US Magnesium, Roche, and Bayer.

    By Envitech, Inc. based in San Diego, CALIFORNIA (USA).

Need help finding the right suppliers? Try XPRT Sourcing. Let the XPRTs do the work for you