Hazardous Waste Incineration Articles

  • Axetris Sensor Field Test

    The Axetris LGDs were operated continuously for two years. After intensive laboratory testing, they went out into the field in 2015. Axetris was able to test the functionality of its sensors under real-life conditions thanks to the support of the Linth waste incineration plant. The gas concentration measuring devices called laser gas detectors ( ...


    By Axetris Ag

  • How to deal with hazardous waste?

    At present,hazardous waste is a facing an increasingly serious environmental problem .so the mainstream of industrial waste disposal methods: curing landfill, biochemical method, incineration disposal method. Other hazardous waste disposal methods include high temperature steam sterilization, microwave, plasma incineration, pyrolysis incineration, wet air ...


    By Harden Industries Ltd.

  • Case study - LKAB, Sweden

    Customer: LKAB, Sweden Project: WetESP pressurized - Processgases Blast Furnace Year 1997 LKAB installed a pilot Blast Furnace at Swerea- MEFOS, Luleå. The product gas contains both CO and H2. The Blast Furnace operates at 0,8 bar over pressure. The design pressure for the WESP is 1,5 bar. The emission standards for dust are < 10 mg/Nm3. This gave ...


    By Envibat AB

  • Case study - SP, Technical Research Institute of Sweden

    Customer: SP, Technical Research Institute of Sweden Project: WetESP for Fire Laboratory Many fire tests are made in full scale. Example for fire tests can be engine rooms, vehicles, store houses, compartments etc. Most of the tests will include ignite phase, full fire and extinguishing. The ignite phase is sooting, full fire will give high temperatures ...


    By Envibat AB

  • Case study - Perstorp Speciality Chemicals AB,Perstorp, Sweden

    Customer: Perstorp Speciality Chemicals AB,Perstorp, Sweden Project: Chemical Waste Incinerator operating WESP Perstorp AB started up their Chemical Waste Incinerator year 2007. The emission standard to meet stated < 5 mg/Nm3. With a standard as low as 5 mg the natural choice ended up in a WESP. Result The plant has operated ...


    By Envibat AB

  • AVA Technology for Hazardous Waste Treatment - Case Study

    AVA has developed systems for pre-treating hazardous waste prior to incineration, which leads to higher throughput performance in combination with lower construction and maintenance costs and additional low pollution emissions, in comparison to conventional techniques. The system is based on the principal that constant gross calorific values and regular piece sizes together with consistency of ...


    By AVA GmbH u. Co. KG

  • Tracking chiral polychlorinated biphenyl sources near a hazardous waste incinerator: Fresh emissions or weathered revolatilization?

    The Swan Hills Treatment Centre (SHTC), located in central Alberta, is the primary facility in Canada for incinerating polychlorinated biphenyls (PCBs). Past studies have shown significant contamination by PCBs and other pollutants of the immediate surrounding region. However, it is unclear whether the major source of contamination to the region's atmosphere is historical release incidents or ...


    By John Wiley & Sons, Ltd.

  • An optimisation model for transportation of hazardous wastes

    The North American Free Trade Agreement (NAFTA) has considerably increased the transport of materials along the US-Mexico borders. Maquiladoras are business entities that are structured to take relative advantages offered by both countries to develop cost-effective products. Current Mexican regulations require that hazardous wastes generated by US companies be shipped back for proper disposal. ...


    By Inderscience Publishers

  • Hazardous wastes and economic risk reduction: case study, Poland

    A concise summary balance of industrial and hazardous waste is given, reflecting the situation in Poland. Nearly 130 million tonnes of waste were generated annually in the past in more than 1300 larger industrial plants. Approximately 1800 million tonnes of industrial waste is already stockpiled. The amount of hazardous waste generated per year was 0.3 and 1.0 million tonnes of the first and ...


    By Inderscience Publishers

  • OTM 17: Determination of Metal Concentrations Using Filters and Solid Sorbents in XRF Analyisis case study

    Eli Lilly and Company (Lilly) operates a waste incineration system located at the Tippecanoe Laboratories in Lafayette, Indiana. This incinerator system includes an Xact multi-metals continuous emissions monitoring system (Xact-CEMS, manufactured by Cooper Environmental Services, LLC) for demonstrating attainment with the Hazardous Waste Combustor MACT for semi-volatile metals, low-volatile ...

  • Incineration of hazardous wastes from the petroleum industry in Nigeria

    Persistent hazardous wastes are produced in the recovery, processing and upgrading of crude petroleum in Nigeria. However, recent developments in environmental pollution control are drawing increasing attention to the problems of hazardous wastes. The ever-increasing need to control these wastes from the petroleum industry often compels the chemical engineer to specify methods of treatment and ...


    By Inderscience Publishers

  • The Operation And Optimization of R.C.R.A. Permitted Liquid Injection Hazardous Waste Incinerators

    BASF Corporation in Hannibal, MO has operated multiple liquid incinerators for more than 20 years, burning various liquid wastes on a campaign basis. The composition of these wastes range from high organic content liquids to aqueous wastes. ...

  • Hazardous Waste Incineration Slag Optimisation by Additives

     Abstract Rotary kiln incineration combined with the disposal of residual slag on landfills defined by German landfill regulations is the most acceptable treatment for hazardous waste with respect to the environment. The objective of research is to optimize the elution behavior of HWI-slag. Quality-improved slags may be disposed off on cheaper landfill sites still applying to the landfill ...


  • Summary and Conclusions of the Study

    Background and objectives According to 'Affald 21', the Danish national waste plan for the period of 1998-2004 (Ministry of Environment and Energy, 1999) recycling of household waste should be increased over the coming years. The plan is focused on increasing sorting and collection from the households, in which glass is one of the fractions.The first objective of this project is to examine ...


    By 2.-0 LCA consultants

  • Hazardous Waste Generation in Selected European Countries: Comparability of Classification Systems and Quantities

     Executive summary Background & methodology The purpose of this report is to review existing data on hazardous waste for the period 1993-1996 and to try to improve the comparability of the data. The report has been prepared by the European Topic Centre on Waste (ETC/W) as part of the work programme of the European Environment Agency (EEA). ...

  • Techniques for processing industrial waste using arcplasma generated by the twelve-phase alternating current

    We have already presented an arc-discharging plasma generator, generally called a thermal plasma generator which is constructed by the six-phase alternating current power supply(Matsuura et al, 1994a, 1997). A more effective thermal plasma generator can construct by expanding this concept. As an example, this small power supply system has been presented in reference (Matsuura et al., 1994b). In ...


    By ORBIT e.V.

Need help finding the right suppliers? Try XPRT Sourcing. Let the XPRTs do the work for you