Only show results available in Connecticut? Ok

Hazardous Waste Incineration equipment for Waste and Recycling

  • Premium

    Model HR 160 - Thermowells & Tubes

    TTEC manufactures Thermocouple Assemblies for severe high temperature corrosive environments. These assemblies utilize an HR160 Thermowell or Protection Tube. HR160 is a solid, solution strengthened NI-Co-Cr-Si Alloy with outstanding resistance to various forms of high temperature corrosion attack. Outstanding High Temperature Corrosion ...

    By Thermocouple Technology, LLC (TTEC) based in Quakertown, PENNSYLVANIA (USA). from Power Industry Thermocouples Product line

  • Premium

    ENVEA (ex Environnement S.A) - Model BETA 5M - Continuous Stack Particulate Monitor

    Continuous stack particulate monitor by Beta ray attenuation. Exists in two versions : BETA 5M: for Dry process particulate monitoring. BETA 5M/H: for Wet process dust measurements.

    By ENVEA based in Poissy, FRANCE. from Emission Monitoring - Particulate Monitors Product line

  • Premium

    Inciner8 - Model I8-20S - General Incinerator

    I8-20S incinerator is one of the smallest and easily maintained general incinerators we make. The i8-20S General Incinerator is a simple and effective small incinerator with suitability for various non-hazardous waste types such as wood, paper, cardboard and other uncontaminated materials. The addition of a secondary chamber allows this model to ...

    By Inciner8 Limited based in Southport, UNITED KINGDOM. from Incinerators - Waste Incinerator Range Product line

  • Premium

    Inciner8 - PPE Kits for Incineration

    PPE kits save lives and ensure the safety of your workers. Anyone else working in close proximity to dangerous materials or powerful incinerators should also use them. The majority of personal protective equipment should be common sense and common place. Your exact requirements may vary depending on the types of waste you handle. But there are ...

    By Inciner8 Limited based in Southport, UNITED KINGDOM. from Others Product line

  • Premium

    ENVEA - Model AMESA - Dioxin Monitoring System

    Traditionally, the monitoring of pcdd/fs is achieved by taking 1–3 short-term samples per year (each of 6 hours). However, over the past 10 years it was discovered that especially during start-up and shut-down periods of (state of the art) incinerators the dioxin emissions in the flue-gas can increase compared to normal operation up to ...

    By ENVEA based in Poissy, FRANCE. from Dioxin Monitoring Product line

  • Premium

    ENVEA - Model MIR 9000 - Multi-Gas NDIR-GFC Analyzer

    Offers excellent performance for multigas measurements in dry sampling, including HCl, HF, NO, NO2, N2O, SO2, CO, CH4, TOC, CO2 and O2 in process applications or for stack emission compliance. Multi-Gas NDIR-GFC analyzer (Non-Dispersive Infrared Gas Filter Correlation) measuring up to ten gases simultaneously, including Nitrogen Oxide (NO), ...

    By ENVEA based in Poissy, FRANCE. from Emission Monitoring - Multi-Gas Stationary Monitoring Systems Product line

  • Premium

    ENVEA - Model MIR 9000 CLD - Multi-Gas Analyzer Infra-Red GFC (CLD-Chemiluminescence Option)

    A unique multi-gaz analyzer for the continuous monitoring of: NO, NO2, NOx, N2O, CO, CO2, SO2, HCl, HF, CH4, TOC and O2 in process applications and for stack emission compliance. Optional measurement of NOX by chemiluminescence.

    By ENVEA based in Poissy, FRANCE. from Emissions & Process - Gas Monitors Product line

  • Premium

    Inciner8 - Model I8-M15 - Medical Waste Incinerator

    I8-M15 Medical waste incinerator is our smallest and most compact solution. You get controlled air incineration, providing optimal combustion conditions for different waste types. The top loading design provides liquid retention making this incinerator ideal for the careful incineration of many different waste types. This unit benefits from a ...

    By Inciner8 Limited based in Southport, UNITED KINGDOM. from Incinerators - Medical Incinerator Range Product line

  • Premium

    ENVEA - Model Mercury Instruments SM-3 - Stack Gas Monitor

    The SM-3 mercury analyzer measures continuously the elemental, bound and ionic mercury in stack fluegas. The operating principle of the SM-3 is based on a completely new technique: mercury compounds cracking and the reduction of ionic mercury contained in stack gas is performed applying the thermocatalytic method. Wet chemical sample gas treatment ...

    By ENVEA based in Poissy, FRANCE. from Emissions - Mercury Instruments Product line

  • Premium

    Model HR160 - Thermowells & Tubes

    TTEC manufactures Thermocouple Assemblies for severe high temperature corrosive environments. These assemblies utilize an HR160 Thermowell or Protection Tube. HR160 is a solid, solution strengthened NI-Co-Cr-Si Alloy with outstanding resistance to various forms of high temperature corrosion attack. Outstanding High Temperature Corrosion ...

    By Thermocouple Technology, LLC (TTEC) based in Quakertown, PENNSYLVANIA (USA). from Thermowells & Thermocouple Protection Tubes Product line

  • Premium

    HARDEN - Model TS08 - Hazardous Waste Processing

    Hazardous waste processing is a challenging work, it is important the disposal of hazardous waste is both extremely safe and reliable. Shredding machine is one of most vital part in hazardous waste processing.HARDEN manufactures hazardous waste shredders for hazardous waste processing. Such as radioactive waste, steel drums containing hazardous ...

    By Harden Machinery Ltd. based in Zhongshan City, CHINA.

  • Premium

    Waste-to-Energy Recycling

    Granutech has products that are well suited to process materials with the ultimate goal of producing energy from waste.

    By Granutech-Saturn Systems based in Grand Prairie, TEXAS (USA). from Industrial Recycling & Shredding Applications Product line

  • Premium

    Tri-Mer - Model Q-Scrub - Incinerator Scrubber

    Q-Scrub Incinerator Scrubber delivers scrubber efficiencies of 95-99.99%. Systems can be engineered to guarantee any outlet rating. Most stack gas emissions requirements are based on a mass emissions standard of lbs./hr. in vs. lbs./hr. out for contaminants such as HCl, Cl2, SO2, HF, etc.

    By Tri-Mer Air Pollution Control Systems based in Owosso, MICHIGAN (USA). from Wet Scrubbers Product line

  • Premium

    Inciner8 - Model I8-M70 - Medical Waste Incinerator

    I8-M70 model is a mid range incinerator, giving you quality design and engineering. The i8-M70 is a medium capacity model from our range of specialist 'M' incinerators which are optimized for medical waste disposal. The addition of a dedicated PLC control panel, I.D. fan and increased insulation improves performance and provides all-round ...

    By Inciner8 Limited based in Southport, UNITED KINGDOM. from Incinerators - Medical Incinerator Range Product line

  • Waste-to-Energy Technology

    The process of burning garbage to generate power, known as waste-to-energy, is among the cleanest sources of electrical power in the world. Converting garbage to energy reduces the volume of the garbage used by 95 percent, saving space in local landfills while providing a viable and economical alternative to the use of fossil and nuclear fuels.

    By ZHZ Group based in Concord, ONTARIO (CANADA).

  • Filtering Units

    Steuler Anlagenbau supplies individually custom-designed complete filtering units for dust abatement of waste gas and flue gases in combustion, industrial and manufacturing plants. The abated dust can be reused directly or after further treatment. The precise dimensioning of the filter load, selection of a suitable filter material with regard to ...

    By Steuler Anlagenbau GmbH & Co. KG based in Höhr-Grenzhausen, GERMANY.

  • Exergy - Forced Circulation Evaporator

    The Forced Circulation Evaporator has been developed over the past 20 years and we have specialized in treating difficult fluid wastes like oil emulsions, dissolved salts, heavy metals, radio-active and other hazardous chemicals, suspended solids etc. The main applications are concentration and/or recovery of oil emulsions, metal salts, leachate, ...

    By Swedish Exergy AB based in Gothenburg, SWEDEN.

  • Model WESP - Wet Electrostatic Precipitator

    EnviBATs wet electrostatic precipitator (Wet Electrostatic Precipitator, WESP) is robust and high-performance, designed to work in all applications, and deliver gas cleaning of the highest standard. In addition to having the industry’s highest availability, our wet electrostatic precipitator just keeps on going, year after year, while ...

    By Envibat AB based in Skellefteå, SWEDEN. from Gas Cleaning Product line

  • INFA-MICRON - Model MKR - Cassette Filter

    The Cassette filter INFA-MICRON is a complete series for filtration of dusts and suspended matters that are respirable, hazardous to health or toxic. The  INFA-MICRON-cassette filter Type MKR (pneumatical cleaning) as well as the INFA-MICRON-cartridge filter, type MPR; count to it. Thanks to the modular system the INFA-MICRON is available ...

    By Infastaub GmbH based in Bad Homburg v.d.H., GERMANY. from Cassette Filters Product line

  • Felix IsoKenetic - Stack Train IST Sampler

    IST Method 5 sampler systems are manufactured to conform with the construction design criteria and specifications cited in US EPA Method 5, Code of Federal Regulations (40CFR Part 60) and APTD-0581 Document. Our source sampler consoles allow operators to monitor gas velocities, temperatures, pressures and sample flow rates in order to maintain ...

    By Felix Technology Inc. based in Concord, ONTARIO (CANADA). from Environment Equipment Product line

Need help finding the right suppliers? Try XPRT Sourcing. Let the XPRTs do the work for you