Hazardous Waste Treatment Articles

  • Kolliken toxic waste water works, Aargau, Switzerland - Case Study

    Kölliken hazardous waste site is 200,000 tonnes of hazardous waste interlayered with 300,000 tons of urban and demolition waste giving a total of 500,000 tons of potentially highly dangerous toxic waste (1978-85). The positioning of this hazardous waste ...


    By BBR Filtration Limited

  • Grab the best wastewater treatment service provider

    The hazardous organic wastes are immensely increasing by industries, militaries as well as by the domestic sources. It is an emerging issue in the recent days and needs immediate actions by government or by any private organization. To reduce the effects of the hazardous waste from the environment, the advanced oxidation process is considered as an efficient technique that helps in removing ...

  • The hot summer by Satrindtech: three new shredding solutions for RDF Production Plants delivered all over the world

    The 2017 summer season at SatrindTech has been really, really hot. ...


    By SatrindTech Srl

  • Enhesa Enforcement Corner - Issue 1

    Input from Taotao Yue, Kengo Okuda, Tjeerd Hendel-Blackford, Riccardo Zorgno, and Jimena Murillo Chávarro. ...

  • Dynamic desorption of arsenic from polymer-supported hydrated iron(III) oxide in a wastewater treatment plant

    Polymer-supported hydrated iron(III) oxide (PHIO) was successfully applied as adsorbent for arsenic removal in a wastewater treatment plant in Nandan, China. The practical PHIO adsorbent samples (PHIO-P) were collected from the adsorption column of the wastewater treatment plant, and desorption experiments of the adsorbent were carried out. Our results showed that the formation of precipitates ...


    By IWA Publishing

  • A chance to drive hazardous waste policy

    The proliferation of energy-from-waste (EfW) power plants is making a significant contribution to the UK’s efforts to end its reliance on harmful fossil fuels. But while EfW plants provide a solution to municipal waste, they also produce a low amount of hazardous waste in the form of air pollution control residue (APCr). Despite numerous solutions existing that process and reuse APCr ...

  • Mitsubishi corporation - Spent Potliner (SPL) hazardous waste treatment - Case Study

    The Challenge Spent Potliner (SPL) is generated in the primary production of aluminium and worldwide is estimated to rise at a rate of over 500,000 tonnes per year. The SPL waste contains concentrations of cyanide and fluoride and gives off noxious and flammable gases when in contact with moisture. Unless carefully handled, these contaminants readily "leach" into the surrounding soils and ...

  • Bound for Venezuela-case study

    SRS Crisafulli, Inc., founded in 1966, is one of a select few manufacturers of specialized, engineered dredging systems in the United States. The company is now, and has been since its inception, located in Glendive, MT. From its beginning, SRS Crisafulli has served agriculture with pumping equipment for irrigation, flood control and dewatering. The past decade has been a period of ...


    By SRS Crisafulli, Inc.

  • AVA Technology for Hazardous Waste Treatment - Case Study

    AVA has developed systems for pre-treating hazardous waste prior to incineration, which leads to higher throughput performance in combination with lower construction and maintenance costs and additional low pollution emissions, in comparison to conventional techniques. The system is based on the principal that constant gross calorific values and regular piece sizes together with consistency of ...


    By AVA GmbH u. Co. KG

  • Hazardous waste and not, Baioni-Dicatech system

    The identification, characterization and restoration of contaminated areas now represent a big environmental issue, both at European and national level. In the major industrialized countries the issue of contaminated land has come out in all its gravity in the late seventies when, against a widespread awakening of environmental consciousness, important pollutions events emerged. Consequently, in ...


    By Baioni Crushing Plants Spa

  • Alternative Dispute Resolution and Cost Allocation - case study

    Untangling liability and legal responsibility for cleanup costs in hazardous waste cases The Summary We combine extensive ADR experience and legal and technical knowledge to successfully address the wide range of factors and situations that arise in cost allocation/Potentially Responsible Party matters, providing our clients with extensive and innovative ...


    By AlterEcho

  • Andover Case Study (C3 Technology)

    In this case study in Andover, Vapor Extraction and Refrigerated Condensation was used as a primary source removal technology to remediate high concentrations of recalcitrant chlorinated solvent compounds at the WDE Site in Minnesota. The use of Refrigerated Condensation has achieved high mass removal rates and will reduce the lifecycle costs and time of remediation. Over 6500 drums of hazardous ...


    By GEO Inc

  • Site remediation using soil mixing techniques of a hazardous waste site: a case history

    Introduction At 2,400 beds, the $112.5 million Allegheny County Jail in Pittsburgh, PA, will be one of the nation's largest county jails. The disused downtown site chosen by the Urban Redevelopment Authority of Pittsburgh sits alongside the Monongahela River, adjacent to Liberty Bridge, on what was previously the old CSX Railroad facility. The southern edge of the site is bound by ...


    By Geo-Con, Inc.

  • Establishment of industrial solid waste treatment costs of the mechanical industry – a case study in Ho Chi Minh City of Vietnam

    Survey results from 72 mechanical manufacturers in Ho Chi Minh City (HCMC) in conjunction with related studies showed that industrial solid waste – hazardous waste (ISW-HW) treatment charges were operated in two forms: fixed and varied based on generated ISW-HW mass. Charges of collection – transport – storage – treatment – landfill for each waste composition varies widely (5 ÷ 20 fold), ...


    By Inderscience Publishers

  • Remediating Unforeseen Sewer Contaminants

    Getting the PCBs out Who: Jersey City, N.J., Municipal Utilities Authority Tons of clean sediment removed: 4,469 Tons of PCB-contaminated sediment: 2,502 Consulting engineer: Boswell Engineering: South Hackensack, N.J. Environmental maintenance contractor: National Water Main ...

  • Improving the sustainability of source removal

    Abstract:There is a growing recognition of the importance of making hazardous waste remediation more sustainable, and thereby minimizing its economic, environmental and social impacts. The attention of sustainable remediation practitioners has thus far been focused on remediation of lower concentration targets, such as dissolved plumes, where reliance on green techniques that mimic naturally ...

  • Recycling and Waste World - Turning difficult waste into a useful resource

    Swindon-based Tetronics specialises in a thermal processing system that treats hazardous waste at source. Geraldine Faulkner talks to CEO, Stephen Davies, to find out about the benefits the company’s plasma process can bring to waste management; especially when it comes to dealing with ‘difficult’ materials. David Cameron is not the only person who is encouraging engagement with ...

  • Case Study: Contract Title - PCI

    Contract Location: East Chicago, IN Contract Start Date: 2/16/2004 Contract Finish Date: 10/14/2004 Quantity Treated (m3): Hazardous Materials, Industrial Wastes Treatment Method: Thermal Desorption Rate of Treatment (m3/hr): 1.5 to 2.5 tons per hour Working Hours per Day: 24 Working Days per Week: 6 Project Description: RLC Technologies ...


    By RLC Technologies, Inc.

  • Managing environmental performance in industrial zones: case studies in Ho Chi Minh City, Vietnam

    Using government records, data from hazardous waste treatment companies, and on–site surveys, we evaluated the effectiveness of the current industrial solid waste management system in Ho Chi Minh City (HCMC), which was established according to the revised Law on Environmental Protection of 2005 and related regulations. In addition, we examined the relationship between the management system and ...


    By Inderscience Publishers

  • Dynatec Provides MBR System for Hazardous Landfill

    The Problem A hazardous waste landfill in Belleville, MI, owned by the Environmental Quality Company had a problem. They needed to develop a treatment process to remove COD, high TDS, heavy metals, phenol, PCB’s, Ammonia, and Molybdenum from the landfill leachate. Current treatment comprised of chlorination and activated carbon treatment was very costly. ...


    By Dynatec Systems Inc.

Need help finding the right suppliers? Try XPRT Sourcing. Let the XPRTs do the work for you