Only show results available in Connecticut? Ok

Incineration Feed Systems equipment for Waste and Recycling

  • Premium

    Dutch Incinerators - Waste Moving Systems

    Reliable waste transfer equipment: We design, manufacture and install simple, smart and reliable waste moving and storage systems, for safe and smooth displacement of waste materials to be incinerated. The complete process of proper and secure storing, feeding, burning and residue removal is fully integrated in our basic design.

    By Dutch Incinerators BV based in Sint Jansteen, NETHERLANDS. from Moving & Storing Product line

  • Premium

    Inciner8 - Model i8-250-AUTO - Pneumatic Automatic Loading System

    Pneumatically powered dual-ram system to enable continuous feeding of waste into an I8-250 incinerator - increases efficiency, safety and longevity of system. 

    By Inciner8 Limited based in Southport, UNITED KINGDOM. from Others Product line

  • Rimeco - Old Unprocessed Steel Scrap

    There must be no heavy steel parts Ike spindles for lathe, heavy construction steel, forks etc. as they can cause damage to equipment. Splinters, incinerators and tires are not allowed. Frag feed usually consist of municipal iron, radiators, roof tiles, frames, tanks (blank), hoods, cages, cars (environmentally treated), white goods, etc. 3% ...

    By Rimeco AS based in Aabenraa, DENMARK.

  • Model HSK-RA 15 - Woochip Boiler

    Our bestseller continues to be the HSK-RA series. This boiler type with complete cladding is characterised by its high effectiveness, its robust processing, best emission values and simple use. The incineration is regulated with a lambda sensor. Feeding in the fuel takes place using the renowned Heizomat discharger technology. The range of use of ...

    By Heizomat Ger├Ątebau- Energiesysteme GmbH based in Gunzenhausen, GERMANY. from Wood Chip Boilers Product line

  • Addfield - Acid Gas Scrubber System

    Lime usage within incineration flue gas treatment is a proven technology. Acid gasses such as hydrogen chloride, (HCL), Sulphur dioxide (S02) and Hydrogen Fluoride (HF) can be treated with the Addfield Acid Gas Scrubber. These chemical compounds are commonly found in large numbers within the chemical and industrial industries and in smaller ...

    By Addfield Environmental Systems Ltd. based in Staffordshire, UNITED KINGDOM. from Filtration Product line

  • Model YD-10 - Small Incinerator

    Model: YD-10. Feed Capacity: 20 kgs per feed. Burning Rate: 10 kgs per hour. Burning Time per Feed: 2 hours. Voltage: 220V. Power: 0.5Kw. Fuel: Diesel oil. Burner: China Burner. Feed Mode: Manual. Fuel consumption (Oil): 5.4-12.6 Kgs/Hour. External Dimensions: 100 x 100 x 160cm (mainbody). Internal Dimensions: 50 x 50 x 80cm(Primary Chamber). ...

    By Nanjing Clover Medical Technology Co., Ltd. based in Nanjing, CHINA. from Small Incinerators Product line

  • TeamTec - Model OG 200 - Compact Incinerators

    With its sturdy and compact design and high performance the OG200 is one of our most popular models and an obvious first choice for solving the waste treatment onboard medium-sized vessels. The thermal capacity is up to 400.000 kcal/h (465 kW).

    By TeamTec AS based in Tvedestrand, NORWAY. from Incinerators Product line

  • TeamTec - Model GS 500 - Marine Incinerators

    The GS500C is one of the most effective marine incinerators on the market today. The model is available with manual or automatic feeding of solid waste and full automatic sludge burning. We have this model in a series of versions, specialized for various needs.

    By TeamTec AS based in Tvedestrand, NORWAY. from Incinerators Product line

  • Incinerators

    The incineration process can be understood through a triangular puzzle. This triangle is an isosceles triangle with two equal and one unequal side. The three sides represent the 3Ts of incineration i.e. Time, Temperature and Turbulence. If one side is decreased then there has to be compensatory increase in the other two. A perfect balance between ...

    By Nika Engineers Pvt. Ltd. based in Noida, INDIA.

  • Thermal Treatment Plant

    Duringthe delivery of the waste and the pre-treatment of domestic waste the pre-sorting meets the special requirements for control, pre-sorting, crushing and homogenization. The industrial and household waste and specific to the products as well as the bulky waste are correspondingly treated prior to a charge into the waste bunker. The Sut-co ...

    By Sutco UK Ltd based in Purley, UNITED KINGDOM. from Waste Sorting and Treatment Plants Product line

  • Model YD-30 - Medical Incinerator

    Equipment Technical Specifications: Model: YD-30. Feed Capacity: 60-120 kgs per feed. Burning Rate: 30 kgs per hour. Burning Time per Feed: 2-4 hours. Voltage: 220V. Power: 0.59Kw. Fuel: Natural Gas or Diesel oil. Burner: Italy Burner. Feed Mode: Manual. Fuel consumption (Oil): 10.0-16.0 Kgs/Hour. Fuel consumption (Gas): 10.0-15.0m3/Hour. External ...

    By Nanjing Clover Medical Technology Co., Ltd. based in Nanjing, CHINA. from Medical Incinerators Product line

  • Model MSW 1000 - Large MSW Incinerator

    Equipment Technical Specifications: Model: MSW1000. Feed Capacity: 200-400 kgs per feed. Burning Rate: 100 kgs per hour. Burning Time per Feed: 2-4 hours. Voltage: 380V. Power: 0.7Kw. Fuel: Natural Gas or Diesel oil. Burner: Italy Burner. Feed Mode: Manual. Fuel consumption (Oil): 8.0-20.0 Kgs/Hour. Fuel consumption (Gas): 10.0-20.0m3/Hour. ...

    By Nanjing Clover Medical Technology Co., Ltd. based in Nanjing, CHINA. from Large MSW Incinerator Product line

  • Garbage Grab Crane

    Garbage Grab Crane is the core device of garbage incineration plant feeding system; it is grab overhead crane, mounted on top of the waste storage pit, mainly responsible for garbage feeding, handling, mixing, extract and weighing.Feeding: When incinerator feed port is insufficient of garbage, crane grab fermented garbage in the garbage pit and ...

    By Weihua Crane Machinery Co., Ltd. based in xinxiang, CHINA.

  • Treatment Plants For Pre-Sorting Facility Before Incineration

    During the delivery of the waste and the pretreatment of domestic waste the pre-sorting meets the special requirements for control, pre-sorting, crushing and homogenization. The industrial waste similar to household waste and specific to the products as well as the bulky waste are correspondingly treated prior to a charge into the waste bunker. ...

    By Sutco RecyclingTechnik GmbH based in Bergisch, GERMANY. from Treatment Plants Product line

  • BioSec - Storage Systems

    Material storage may be required in the system for buffer between intermittent feed systems, truck loading to suit transportation schedules, incineration and dryer feed.

    By BioSec Enviro Inc. based in Guelph, ONTARIO (CANADA). from Dewatered Solutions Product line

Need help finding the right suppliers? Try XPRT Sourcing. Let the XPRTs do the work for you