Only show results available in Virginia? Ok

Industrial Shredders Applications

  • Premium

    Recycling Systems for the paper industry

    MACPRESSE produces special machines for the paper industry, automatic presses with an hourly output of between 3 and 60 tons per hour as well as other ancillary equipment.

    By Macpresse Europa S.R.L based in Vernate, ITALY.

  • Premium

    Recycling sorting solutions for the non-ferrous metals - post shredder

    The widespread use of electronic products has created an enormous demand for the sorting of non-ferrous metals such as copper and aluminum. To be usable, these non-ferrous metal fractions must be treated to a high degree of purity. Thanks to TOMRA’s efficient sorting technology, separating these materials from metal waste makes is worthwhile in every aspect.

    By TOMRA Sorting GmbH. based in Mülheim-Kärlich, GERMANY.

  • Premium

    Reliable Shredding Technology for Metal-processing Industry

    Regardless of whether your metal waste comes from the metal-processing industry, automotive industry, electronics industry, waste industry or commercial production, we will always offer you the right shredding system for recycling your valuable resources! Metals are important raw materials for the industry and can be repeatedly returned to the recovered resource cycle with very little loss. The recycling of metals saves valuable raw materials and energy as opposed to the new processing of ores.  Our sturdy rotary shears that have been tried and tested a thousand times over, reliably and efficiently shred light metals such as aluminium, magnesium, Al-Mg alloys, copper or nickel, as well as harder metals such as iron, zirconium, titanium and sheet steel.

    By UNTHA Shredding Technology based in Kuchl, AUSTRIA.

  • Premium

    Reliable Shredding Technology for Plastic Materials

    As a renowned manufacturer of reliable plastics shredders, we offer special machines for in-house recycling and for heavily contaminated post-consumer waste. Due to its format, components and characteristics, plastic is a very versatile material that is primarily used in industrial mass production. The resulting plastic waste can be recycled by shredding and washing the material, before generating a reusable, recycled granulate. Shredded plastic waste can also be used for energy generation.

    By UNTHA Shredding Technology based in Kuchl, AUSTRIA.

  • Premium

    RDF/SRF shredder

    UNTHA shredding technology is offering reliable RDF/SRF shredder with high throughput.

    By UNTHA Shredding Technology based in Kuchl, AUSTRIA.

  • Premium

    Recycling equipment for industrial paper & wood shredding

    Our industrial paper shredders are designed to process paper, cardboard, and pulp waste. The shredded material is then used to manufacture new products, enabling manufacturers to efficiently recycle paper products. In addition, industrial paper shredders are used to ensure secure and total destruction of documents.

    By Granutech-Saturn Systems based in Grand Prairie, TEXAS (USA).

  • Premium

    Recycling equipments for shredding & reducing medical waste

    Shredding and reducing medical waste poses special challenges. Processing must meet stringent regulatory standards for the safe handling of infectious and red bag waste, including precise size reduction to ensure proper sterilization. In addition, the waste is comprised of many different materials, ranging from sharps to textiles, requiring shredders that can effectively process the variety of materials.

    By Granutech-Saturn Systems based in Grand Prairie, TEXAS (USA).

  • Premium

    Automobile injection-moulded shredding for the special waste recycling industry

    Shredding plants for plastics from automobile industry as well as injection-moulded parts.

    By Erdwich Zerkleinerungssysteme GmbH based in Igling, GERMANY.

  • Premium

    Metal swarf shredding for the metal industry

    In metal-working shops utilising swarf-producing manufacturing techniques, the generated swarf is often an underestimated cost factor.

    By Erdwich Zerkleinerungssysteme GmbH based in Igling, GERMANY.

  • Premium

    Plastic shredders

    Plastic shredding As a renowned manufacturer of reliable plastic shredders, we offer special machines for in-house recycling and for heavily contaminated post-consumer waste. Due to its format, components and characteristics, plastic is a very versatile material that is primarily used in industrial mass production. The resulting plastic waste can be recycled by shredding and washing the material, before generating a reusable, recycled granulate. Shredded plastic waste can also be used for energy generation. Our plastic shredders were developed specifically for the processing of these components. They deal effortlessly with all kinds of plastics, ranging from foils, lumps, profiles, fibres, ribbons, PET bottles and hollow parts to post-consumer and production waste. Thanks to a range of different cutting systems, rotor diameters and shapes as well as different blade sizes, the shredders are suitable for thermoplastics, duroplastics and elastomers. A Customized plastic shredder for you

    By UNTHA Shredding Technology based in Kuchl, AUSTRIA.

  • Premium

    Reliable Shredding Technology for Organic Waste

    Our shredders process biological and biogenic waste to generate an optimal substrate for further utilisation in your biogas plant or in your disposal business. The application area ranges from green or garden waste to food waste and expired goods including packaging to slaughterhouse waste. Non-homogeneous or organic waste in pieces including packaging must be shredded to prepare it optimally for fermentation. Our low-speed S-series shredders are ideally suited for this application. These two-shaft shredders ensure reliable processing and guarantee a pumpable fermentation substrate. Thanks to the special equipment, efficient cutting unit and sturdy machine construction, these shredders are very reliable and have a long service life!

    By UNTHA Shredding Technology based in Kuchl, AUSTRIA.

  • Premium

    Reliable Shredding Technology for Pulper Ropes

    In addition to a homogenised granulate of your residual products, our customized shredding systems guarantee an optimal pre-product for further recycling or thermal utilisation in your plants. Pulper ropes or the reject are secondary raw materials that are created when waste paper is recycled. The pulper ropes must not be landfilled due to their material composition and must therefore be recycled accordingly – in most cases through shredding and subsequent separation of metals, glass and stones, etc. Our rotary shears or 2-shaft shredders together with our 4-shaft technology are very well suited for this application case. The advantage of the 4-shaft machines lies in the fact that the pre- and re-shredding occurs in one process step.

    By UNTHA Shredding Technology based in Kuchl, AUSTRIA.

  • Premium

    Reliable Shredding Technology for Waste Wood Recycling Industry

    Waste wood is a precious resource that is available in large volumes and may be used either for material recycling or energy production, depending on the quality grade. The rising cost of waste material disposal and a growing consciousness for the environment also contribute to the increasing importance of waste wood recycling. The term “waste wood” includes all woods and wood-based materials that have come to the end of their product lifespan and are thus considered waste.

    By UNTHA Shredding Technology based in Kuchl, AUSTRIA.

  • Premium

    Substitute fuel sampling system

    A critical eye for every sample! Analytical shredding systems for QA work are a fundamental preliminary component in the production of substitute fuels. With primary fuels and finite resources subject to continuous price increases, the significance of substitute fuels continues to rise unabated. For plant operators, this offers first-class potential and attractive prospects for the future. Businesses that buy in their substitute fuel from external suppliers are faced with two key analytical requirements before putting it to use: pollutant analysis and calorific analysis. To ensure the proper handling of these analyses, a sophisticated sampling system is required.

    By Erdwich Zerkleinerungssysteme GmbH based in Igling, GERMANY.

  • Premium

    Cardboard shredders for cardboard recycling

    Makes even the biggest mountains of cardboard into molehills! Every year, Germany produces around 10 million tonnes of cardboard and paperboard for the packaging industry. After their use, these items of cardboard packaging and boxes must then be reduced in volume before passing through the recycling process. This volume reduction step is performed by recycling companies and public recycling depots or in cardboard packaging and corrugated board factories.

    By Erdwich Zerkleinerungssysteme GmbH based in Igling, GERMANY.

  • Premium

    Recycling equipment for shredding electronic scrap (E-scrap)

    Processing electronic scrap (E-Scrap or WEEE) presents special challenges. Computers, consumer electronics, and IT equipment need to be destroyed to extract recyclables or ensure the security and complete destruction of the product. Hard drives, tapes and data storage devices must be completely destroyed to provide data security. And, while many electronic scrap items do not require the specific size reduction that hard drives or other data storage devices require, all electronic scrap includes recoverable materials that can be recycled for future use. As a result, separation and recovery are critical elements of the shredding process for electronic materials.

    By Granutech-Saturn Systems based in Grand Prairie, TEXAS (USA).

  • Premium

    Recycling equipment for industrial rubber shredding & recycling

    Granutech Saturn Systems has over 40 years’ experience designing and manufacturing world-class shredders for industrial rubber scrap. We have consistently been in the forefront of developing machinery to provide high quality rubber crumb from rubber and tire scrap. Whether your application is processing remainders from rubber molding, shredding rubber scrap or shredding tires, we have the expertise to design a custom solution that meets your exact application and processing requirements.

    By Granutech-Saturn Systems based in Grand Prairie, TEXAS (USA).

  • Premium

    Recycling equipments for shredder light fraction (SLF) recycling

    Dismantled ELVs (End of Life Vehicles) are sold to shredder operators and are reduced to fist-size pieces by large rotating hammer mills. The Shredder Light Fraction (SLF) is removed from the stream by suction, the intensity of which determines the amount and composition of the SLF. SLF consists essentially of plastics/rubber (~60%), Glass/sand i.e. mineral substances (~15%), Textiles/leather/wood (~10%), Paint dust/rust (~10%) and Residual metals (~5%). Other names for SLF are ASR (Automobile Shredder Residue) and Auto fluff or just fluff.

    By Eldan Recycling A/S based in Faaborg, DENMARK.

  • Premium

    Recycling sorting solutions for the end-of-life vehicle scrap - shredder

    The growing demand for high-value, secondary raw materials renders targeted recycling increasingly attractive. Modern TOMRA Sorting technology generates clean non-ferrous metal fractions in customer shredder operations and results in valuable scrap metal gains.

    By TOMRA Sorting GmbH. based in Mülheim-Kärlich, GERMANY.

  • Premium

    Reliable Shredding Technology for Rubber and Tyres

    Our shredding systems generate granulate from the hardest rubber and old tyre applications for your recycling plant. Regardless of whether you want to use the granulate for pyrolysis, hydrolysis or combustion, we will customize it to exactly fit your needs. Regardless of whether rubber accumulates in the form of tyres, conveyor belts, rubberised chains or as production waste, recycling is economically efficient and makes sense from an environmental perspective. Very powerful shredders are required to recover recyclable materials from rubber waste and old tyres. Our proven and reliable 4-shaft technology is particularly suited in this regard. This system economically performs the pre- and re-shredding in just one step.

    By UNTHA Shredding Technology based in Kuchl, AUSTRIA.

Need help finding the right suppliers? Try XPRT Sourcing. Let the XPRTs do the work for you