Industrial Shredders Applications
-
Premium
Machineries for tire shredding & recycling
The scrap tire processing industry is growing rapidly as the number of discarded tires increases, landfill capacity diminishes and environmental pressures mount. The development of end-use markets which consume scrap tires, including recycling, tire derived fuel (TDF), and tire derived aggregate (TDA) are being pursued by industry, the private sector and government. Shred-Tech® has responded to this growing demand for new technologies with products designed for the effective reduction and recovery of scrap ...
By 3R-Machinery (by Shred-Tech) based in Raleigh, NORTH CAROLINA (USA).
-
Premium
Machineries for e-waste shredding & recycling
Governments and manufacturers of electronic hardware are increasingly coming under pressure regarding the safe disposal of electronic waste once their useful life has been completed. End-of-life (EOL) legislation for e-scrap is in place in many countries and pending throughout Europe and North America. Shred-Tech® has engineered and manufactured custom systems to shred, separate and recover the component materials that make up these electronic ...
By 3R-Machinery (by Shred-Tech) based in Raleigh, NORTH CAROLINA (USA).
-
Premium
Shredding machineries for hard drive shredding
Hard Drive Destruction is one of the fastest growing segments in the Information Destruction Industry. The ST-5 Portable Plug-In Hard Drive Shredder and our ST-5 Stationary Hard Drive Shredder Systems can destroy a hard drive in just 5 seconds. Both shredding systems are also electronically interlocked for safe and easy ...
By 3R-Machinery (by Shred-Tech) based in Raleigh, NORTH CAROLINA (USA).
-
Premium
Shredding machineries for waste processing
Each system is designed to meet regulatory safety, and material handling requirements. Shred-Tech® engineers are experienced at designing turnkey solutions to each unique waste handling and processing ...
By 3R-Machinery (by Shred-Tech) based in Raleigh, NORTH CAROLINA (USA).
-
Shredder applications for Hospital, pharmaceutical, cosmetical waste
Shredded in sterilization ...
By ITS - Shredding & Grinding Solutions based in Cesano Boscone (MI), ITALY.
-
Shredder applications for Electric cables
Shredded to reduce cable size and optimize ...
By ITS - Shredding & Grinding Solutions based in Cesano Boscone (MI), ITALY.
-
Shredder applications for Car bumpers
Size reduction to allow to remove steel parts and optimize ...
By ITS - Shredding & Grinding Solutions based in Cesano Boscone (MI), ITALY.
-
Shredder applications for AL waste
Shredded to obtain denser bales or allow consistent melting in ...
By ITS - Shredding & Grinding Solutions based in Cesano Boscone (MI), ITALY.
-
Enterprise Resources Planning for the Waste & Recycling Industry
THE CHALLENGE: NOT ONLY DISPOSAL, BUT ALSO PROCESSING. The waste management and recycling industry consists of companies acting as waste collection and landfill operators, processers (sorters, waste treatment specialists, shredders and recyclers) or traders in secondary raw ...
By COSMO CONSULT SI GmbH based in Steyr-Gleink, AUSTRIA.
-
Recycling and separation of shredder light fraction
Ad Rem's main focus is currently on the processing, reuse and recycling of Shredder Light Fraction. Currently shredder light fraction is already being processed at Group Galloo with the Ad Rem equipment. With the enormous experience in house on this subject, Ad Rem is currently designing a complete new recycling facility for Group Galloo. This new facility will be specialized in treating Shredder Light Fraction. This installation is full of new exiting technologies and hopes to set the standards for the next ...
By Ad Rem based in Menen, BELGIUM.
-
Complete solutions for the recycling industry
For over 40 years, Macpresse designs and manufactures complete solutions for the recycling industry. From individual technologies, i.e. balers, shredders etc. right up to complete sorting plants and Material Recovery ...
By Macpresse Europa S.R.L based in Vernate, ITALY.
-
Shredder applications for MSW
Solid urban waste and industrial waste shredded for further ...
By ITS - Shredding & Grinding Solutions based in Cesano Boscone (MI), ITALY.
-
Shredding solutions for on board (marpol)
The restricted operating spaces on board of a boat make essential the use of compact shredders for optimizing it. These shredders must ensure the required performance in terms of shredding capacity. SatrindTech proposes three models: one at 3hp, one at 10hp and one at 15hp. SatrindTech’s shredders at 3hp are MARPOL 73/78 – Annex V, approved. The other two models available, the 10 and the 15hp models can use special blade sets that can grant the same performances of the certified shredder. The goal to ...
By SatrindTech Srl based in Arluno, ITALY.
-
Waste handling solutions for the waste splitting sector
Mechanical treatment as the foundation for recycling: The reuse of materials and energy from waste is central to modern waste management. The foundation for it is laid by mechanical preparation in the form of waste splitting. In it, recyclables are recovered from the waste stream and high-yield combustibles are separated out for further processing as refusederived fuels (RDF). The remaining residue fraction can be stabilized and then ...
By Komptech GmbH based in Frohnleiten, AUSTRIA.
-
Shredder applications for WEEE
Shredding to allow the subsequent separation of various ...
By ITS - Shredding & Grinding Solutions based in Cesano Boscone (MI), ITALY.
-
Shredders for Industrial and Urban Waste Treatment
One of the most active field in the last years is that related to the Municipal Solid Waste ...
By SA Eng. based in San DonĂ di Piave, ITALY.
-
Shredder Applications for Tyres
Whole tyres shredded in single or more stages. ...
By ITS - Shredding & Grinding Solutions based in Cesano Boscone (MI), ITALY.
-
Shredder applications for Big-bag, PP rope
PP Ropes, pre-shredded big-bag, NWT, ...
By ITS - Shredding & Grinding Solutions based in Cesano Boscone (MI), ITALY.
-
Recycling Process solutions for waste and recycling industry
The Castolin Eutectic philosophy to conserve the earth's precious resources and give added value to old and worn parts is acknowledged world-wide. The typical processes used subject recycling equipment to abrasion, erosion, impact wear, and corrosion. These are Castolin Eutectic's core competences, and we have the proven know-how to ensure the efficiency and reliability of recycling equipment wherever the problem ...
By Castolin Eutectic based in St-Sulpice, SWITZERLAND.
-
Waste Electrical and Electronic Equipment (WEEE) shredding for the recycling industry
By Molinari S.r.l. based in Lenna (Bergamo), ITALY.
Need help finding the right suppliers? Try XPRT Sourcing. Let the XPRTs do the work for you