pre-shredding Equipment available in Maine

Available in Maine| Near Maine
772 Results found

We couldn't find any pre-shredding equipment in Maine

Here is a list of results available in Maine

Current filtering criteria

You can remove a filter by clicking on the x
  • Category: Waste & Recycling ×

  • Subcategory: Industrial Shredders ×

  • Keyword: pre-shredding ×

  • Available in: USA ×

  • Available in: Maine ×

Donasonic - Model Thunderstorm Series - Pre-Shredding Machine

by Donasonic     based in South Yorkshire, UNITED KINGDOM

The Donasonic Thunderstorm series is a pre-shredding machine for high throughput volumes. Compare the Volume of the Input Waste. Preparation of the Waste for Other Recycling Process Technologies. Preparation of the Waste for Incineration.

Donasonic - Model Typhoon Series - Pre-Shredding Machine

by Donasonic     based in South Yorkshire, UNITED KINGDOM

The Donasonic Typhoon Series is a pre-shredding machine that prepares your initial waste materials. Compare the Volume of the Input Waste Material. Preparation of the Waste for Other Recycling Process Technology. Preparation of the Waste for Incineration.

Pre-Shredding Equipment

by Trash 2 Recycling Inc.     based in CALIFORNIA (USA)

A Single Shaft pre-shredder for unsorted highly contaminated waste streams condition the waste stream for further processing. This machine is the ideal 1st step for a multi stage waste processing system. This line offers shredding capacities of 9-33 tons/hr (8-30 metric tons/hr) for particle sizes <=8” (200mm).

VERTISA Promed - Medical Waste Pre-Shredding System

by VERTISA Medical Waste Technology     based in Orlando, FLORIDA (USA)

Definition of Problem Managing Medical Waste; The toxic waste is a mass of contaminated waste which may contains syringes, needles, paper, plastics, glass, textiles, cultures pathological waste, blood products, sharps, tissues and infectious materials produced by the medical industry in clinics, hospitals, labs and research centers.

iSortAir-M - For Fine Sorting Of Pre-Shredded And Sorted E-Waste

by Neatco Engineering Services Inc.     based in Cambridge, ONTARIO (CANADA)

This portable and more importantly affordable machine is a perfect solution for fine sorting of pre-shredded and sorted e-waste stream to increase the recovery rate and purity of the finished products. For instance, electronic scrap is mostly mixed of PCB-boards with plastic and metallic pieces. If the objective is to recover more valuable metals ...


WEIMA - Model WL 10 - Single-Shaft Shredder

by WEIMA     based in Ilsfeld, GERMANY

The WL 10 single-shaft shredder is used in the woodworking industry for shredding large quantities of timber waste. The rotor widths is  1000 mm. The machine is driven by an electric motor with an output of 30 kW to 45 kW. The level of required drive output depends on the material to be shredded, the number of shredding knives being used and ...

Erdwich - Three-Shaft Shredder

by Erdwich Zerkleinerungssysteme GmbH     based in Kaufering, GERMANY

The uniform shredding of coarse materials: that’s the speciality of the ERDWICH three-shaft shredder. ERDWICH has created the three-shaft design especially for these requirements. Entirely free of clogging and jamming – even with solid materials. Clever, huh?. Absolutely: after all, the three cutter shafts and their individual sets of ...

Erdwich - Coarse Shredder Reisser for Processing of Electronic Waste

by Erdwich Zerkleinerungssysteme GmbH     based in Kaufering, GERMANY

When processing electronic scrap, the aim is not merely to ensure the highest levels of process reliability and performance, but to salvage components such as capacitors and batteries intact where possible. Here, the the RM 1350/2 coarse shredder really struts its stuff: with the especially slow-running twin-shaft rotor/shredder system, the ...

Erdwich - Two-Shaft Shredder

by Erdwich Zerkleinerungssysteme GmbH     based in Kaufering, GERMANY

Continuous-process shredding of large quantities and volumes: that’s the world of the ERDWICH two-shaft shredder. The secret of its success is our ERDWICH rotor-blade cutting principle, honed to perfection over decades. Want to know more?. The material is taken up by the barbed blade, pulled unceremoniously into the machine and then shredded ...

Erdwich - Single-Shaft Shredder

by Erdwich Zerkleinerungssysteme GmbH     based in Kaufering, GERMANY

Achieving precision material breakdown in just a single operation: that’s the proven capability of the Erdwich single-shaft shredder.

Erdwich - Hammer Mills

by Erdwich Zerkleinerungssysteme GmbH     based in Kaufering, GERMANY

ERDWICH hammer mills are the answer to the challenge of selectively shredding hard and brittle materials. Then again, ERDWICH hammer mills also take the pelletisation of rubbery materials - as preparation for downstream separation systems - in their stride. A tough customer? Just so. ERDWICH hammer mills are especially suited to metal, electrical ...

Eldan - Model S 1000 / S 1500 - Ring Shredder

by Eldan Recycling A/S     based in Faaborg, DENMARK

Impact rings ensures opening of material and liberation of metals. The impact rings are mounted on 4 secondary shafts located on the rotor. Easily exchangeable grates available with different hole sizes. Exchangeable wear parts give you a virtually indestructible machine.

Eldan - Model TS970-II / TS1460-II - Twin Shaft Pre-Shredder

by Eldan Recycling A/S     based in Faaborg, DENMARK

The Eldan Twin Shaft Pre-Shredders are a perfect complement to cable and tyre plants for initial size reduction. They can be used for size reduction of materials like: copper cable, aluminium cable, tyres (ts1460-2), refrigerator.

Eldan - Model SC1412/160 / SC2118/250 - Super Chopper II (Twin Rotor)

by Eldan Recycling A/S     based in Faaborg, DENMARK

The Eldan Super Choppers are heavy duty pre-choppers designed as first step in any recycling process. The twin rotor version of the Super Chopper is a further development which enable you to process voluminous and tough material. Proven technology at its best.

Eldan - Multi Chopper

by Eldan Recycling A/S     based in Faaborg, DENMARK

The Multi Chopper has a low speed, high torque rotor enabling processing of tough materials. It is powered directly by Hägglund hydraulic motor and power unit enabling automatic reverse for overload protection thus minimizing knife damages. Knives available in different steel qualities providing the optimum solution for processing of your ...

Eldan - Model SC1412/160 / SC2118/250 - Super Chopper

by Eldan Recycling A/S     based in Faaborg, DENMARK

A low speed and high torque makes the Super Chopper suitable for processing of tough materials. It is powered directly by Hägglund hydraulic motor and power unit enabling automatic reverse for overload protection thus minimizing knife damages. Adjustable knife clearance optimize the cut function. The knives can be reground multiple times on a ...

WEIMA - Model Woodwolf - Crusher Machine

by WEIMA     based in Ilsfeld, GERMANY

The Woodwolf is a unique machine designed to act as a pre-crusher. It can be used as a stand-alone unit or as part of a two-stage process that incorporates a WLK shredder. A 600 mm (diameter) screw crushes the input material (such as pallets, big chipboard or furniture) into standard paper-size. The Woodwolf can be placed over the top of a ...

WEIMA - Model WSM 500/700 - Granulator

by WEIMA     based in Ilsfeld, GERMANY

WSM granulators are suitable for shredding a wide range of plastics to make high quality granulate. They can process, for example, blow-moulded materials such as PET bottles, PE/PP bottles, canisters or buckets. In addition it is possible, depending on the version, to shred resistant materials such as thick-walled pipes. WSM granulators can be ...

WEIMA - Model WSM 300/600 - Granulator

by WEIMA     based in Ilsfeld, GERMANY

WSM granulators are suitable for shredding a wide range of plastics to make high quality granulate. They can process, for example, blow-moulded materials such as PET bottles, PE/PP bottles, canisters or buckets. In addition it is possible, depending on the version, to shred resistant materials such as thick-walled pipes. WSM granulators can be ...

WEIMA - Model WQZ 1200 - Chain Impactor Shredders

by WEIMA     based in Ilsfeld, GERMANY

Chained up! The powerful and flexible chain impactor is suitable for crushing different materials such as electronic scrap, cooling systems, freezers, RDF scrap, or biomass. There are no cutting tools, such as rotating or fixed blades and granulating sieves. By colliding the accelerated feed material against itself performs approximately 80% of ...

Need help finding the right suppliers?

Let the XPRTs do the work for you