shredding equipment (Industrial Shredders) equipment available in Papua New Guinea

  • Balemaster - Model 1400 Series - Low RPM Quiet Shredder

    The 1400 Series Quiet Shredder has been specially engineered to reduce the noise and dust produced in a shredding operation. The unit is equipped with multiple slow speed arbors to produce 'hand' size pieces that are ideal for high density baling.

    By Balemaster based in Crown Point, INDIANA (USA). from Low RPM Quiet Shredder Product line

  • Komar Viking - Model II - Hydro-Auger Industrial Shredder

    The KOMAR Viking II Hydro-Auger Industrial Shredder provides primary shredding of difficult, oversize or bulky waste at the lowest online operating cost of any volume reduction equipment. It handles a high volume of waste at low speed with minimum noise, dust and energy requirements. The Viking II industrial shredder utilizes high-torque, ...

    By Komar Industries Inc. based in Groveport, OHIO (USA). from Hydro-Auger Industrial Shredder Product line

  • WEIMA - Model WL 10 - Single-Shaft Shredder

    The WL 10 single-shaft shredder is used in the woodworking industry for shredding large quantities of timber waste. The rotor widths is  1000 mm. The machine is driven by an electric motor with an output of 30 kW to 45 kW. The level of required drive output depends on the material to be shredded, the number of shredding knives being used and ...

    By WEIMA based in Ilsfeld, GERMANY. from Single-Shaft Shredder Product line

  • Model FW - Shredders

    Rear shredder, strong and multipurpose, suitable for big tractors (from 65 to 90 HP).This machine is suitable for shredding grass, bushes, wood shoots (up to diameter 5/6 cm) and to upkeep big and non-seed green areas (set-aside fields).Available with working widths 240 – 280 – 300 cm.All models are standard equipped with hammers, ...

    By BECCHIO & MANDRILE based in Savigliano, ITALY.

  • Green Giant - Model ECO TS-120-75-100-M - - Two Shaft Shredder

    Looking for the latest technology in tire shredding? The ECO Green Giant series provides you GIANT cost cuts in maintenance and operation savings while keeping you in the green. The ECO Green Giant shredder series is a patented two-shaft shredder design exclusive to ECO Green Equipment.  For the best commercial production of rubber ...

    By ECO Green Equipment based in North Salt Lake, UTAH (USA). from Two Shaft Shredder Product line

  • MetsoEtaPreShred - Model 6000M/S - Waste Pre-Shredder Mobile and Stationary

    The Metso EtaPreShred 6000 mobile is one of the largest mobile waste shredders currently available anywhere in the world. This waste shredder is capable of shredding large volumes of any kind of waste. These units are ideal when a very high capacity is required, or for shredding material that is either extremely bulky or very heavy. Examples ...

    By Metso Recycling Equipment based in Duesseldorf, GERMANY. from Waste Pre-Shredder Mobile and Stationary Product line

  • Negri - Model R70 Series - Bio-Shredders

    The R70 bio-shredder is a hobby machine, used to shred garden waste, branches of hedges and small prunings (with a maximum diameter of 50 mm), resulting from the maintenance of small green areas. The machine can be equipped either with a single-phase electric engine or with a petrol engine (Honda/ Subaru).

    By Negri Garden Equipment srl based in Campitello di Marcaria, ITALY. from Bio-Shredders Product line

  • AUTOCHARGER - Model FRP/FRX-SERIES - Single Shaft Shredder with Medium Speed

    Tube shredder is a single shaft shredder with medium speed, it is electrical and a has a pendular hydraulic pusher and a hydraulic table Autocharger that feeds the tubes into the rotor. The pusher presses the material against the rotor, equipped with fixed teeth that shred the material against anvils. The whole process is programmed in Franssons ...

    By Franssons Recycling Machines AB - ANDRITZ Group based in Sundsvall, SWEDEN.

  • UNIVERSAL - Model 91/141 - Single Shaft Shredders

    FRP is a single shaft shredder with medium speed, it is electrical and a has a pendular hydraulic pusher. The pusher presses the material against the rotor, equipped with fixed teeth that shred the material against anvils. The hydraulic pusher is driven by a hydraulic pump with a last generation proportional valve. The whole process is programmed ...

    By Franssons Recycling Machines AB - ANDRITZ Group based in Sundsvall, SWEDEN.

  • UNIVERSAL - Model FRP-181/251/301 - Single Shaft Shredder with Medium Speed

    FRP is a single shaft shredder with medium speed, it is electrical and a has a pendular hydraulic pusher. The pusher presses the material against the rotor, equipped with fixed teeth that shred the material against anvils. The hydraulic pusher is driven by a hydraulic pump with a last generation proportional valve. The whole process is programmed ...

    By Franssons Recycling Machines AB - ANDRITZ Group based in Sundsvall, SWEDEN.

  • Universal - Model 153/203 - Single Shaft Shredder with Medium Speed

    FRP is a single shaft shredder with medium speed, it is electrical and a has a pendular hydraulic pusher. The pusher presses the material against the rotor, equipped with fixed teeth that shred the material against anvils. The hydraulic pusher is driven by a hydraulic pump with a last generation proportional valve. The whole process is programmed ...

    By Franssons Recycling Machines AB - ANDRITZ Group based in Sundsvall, SWEDEN.

  • Model VAZ 2000 - VAZ 2500 - Single Shaft Heavy Duty Shredders

    The heavy- duty series of the single- shaft shredders starts with the VAZ 2000. The VAZ 2500 is the biggest shredder of the heavy-duty series of the single-shaft shredders. This machine is used to shred all kinds of solid materials, such as wood, paper, plastics, industrial or municipal solid waste. It requires very little maintenance or ...

    By Vecoplan AG based in Bad Marienberg, GERMANY. from Single Shaft Heavy Duty Shredders Product line

  • Model MD - Shredder

    Rear shredder, strong and multipurpose, suitable for medium/big tractors (from 30 to 80 HP).This shredder is particularly versatile with a broad range of potential uses. It is suitable for shredding grass, leaves, bushes, shoots (up to diameter 5/6 cm), straw and to upkeep the greenareas. Available with working widths 120 -140 -160 -180 - 200 - ...

    By BECCHIO & MANDRILE based in Savigliano, ITALY.

  • WEIMA - Model WL 8 - Universal Shredder

    The classic model for shredding all kinds of wood waste. Thousands of shredders in series WL 4 – WL 6 – WL 8 are used all over the world from small to medium sized businesses. Their distinguishing feature is a very rugged construction enabling offering long service (even positioned outdoors). The global popularity of this shredder ...

    By WEIMA based in Ilsfeld, GERMANY. from Universal Shredder Product line

  • Model BA - Professional and Strong Shredder

    Professional and strong shredder, multipurpose, suitable for medium tractors (from 50 to 90 HP).This machine is suitable for shredding grass, leaves and shoots (up to diameter 6/8 cm) and to upkeep the green areas. The rounded and lower frame, the big lateral side-shift and the mouthpiece height allow a better use of the machine during works ...

    By BECCHIO & MANDRILE based in Savigliano, ITALY.

  • GIAMPI - Model Jolly Fixed - Shredder

    Shredder mod. JOLLY Fixed is designed for the processing of parks, sports fields, gardens, and the shredding of small branches up to a diameter of 4 cm. It should be applied on attack three central points of the tractor, has reduced overall dimensions and low power consumption. the machine is equipped with gearbox with freewheel internal, fixed ...

    By Giampi S.r.l. based in Carbognano, ITALY.

  • Next 6280 Mobile Shredder

    The 3TEK NEXT™ 6280 mobile shredder incorporates a CAT® 1,125 hp state-of-the-art mobile “on track” diesel-power module design, with unique power pack options and other modular downstream equipment specifically designed to facilitate ferrous and non-ferrous scrap processing close to the source. The NEXT 6280 mobile shredder ...

    By 3TEK Global based in Grand Prairie,, TEXAS (USA). from Next 6280 Mobile Shredder Product line

  • WEIMA - Model WL 6s - Universal Shredder Used for Wood and Timber Waste

    The WL 6s shredder is used for shredding large quantities of wood and timber waste. The machines are fitted with very high powered rotors of 800 mm width. The rotor diameter is 368 mm. The large rotor and the wrap angle of the screen ensure high throughput rates. Machines with a drive output of 30 kW or more are fitted with a hydrodynamic clutch, ...

    By WEIMA based in Ilsfeld, GERMANY. from Universal Shredder Used for Wood and Timber Waste Product line

  • AXO - Modular Systems

    AXO design modular Systems and shredding plants that process material efficiently, require a minimum of labour input and are ultimately profitable for our customers. We offer systems and layouts that have already proven their effectiveness all over the world. From fully integrated conveyor, shredder & baler systems to one off specific designs ...

    By AXO Shredders Ltd based in Wellington, NEW ZEALAND. from Modular Systems Product line

  • Model TM320-400-450 - Multipurpose Shredder

    Professional multipurpose shredder with double transmission suitable for big tractors (from 100 to 120 HP). This shredder is particularly versatile with a broad range of potential uses. It is suitable for shredding grass, straw, cotton, stalks of corn, beetroot and potatoes leaves, sugar cane,  etc., wooden shoots (up to diameter 8 cm). ...

    By BECCHIO & MANDRILE based in Savigliano, ITALY.

Need help finding the right suppliers? Try XPRT Sourcing. Let the XPRTs do the work for you