Steel Shredding (Industrial Shredders) Equipment
-
PremiumDistributed by 3R-Machinery (by Shred-Tech)based in USA
Unsurpassed throughput and payload make the MDS-18 an industry game ...
-
PremiumDistributed by 3R-Machinery (by Shred-Tech)based in USA
The all new MDS-15 is the perfect compromise between our MDS-12 and MDS-18 models. Still very maneouverable on tight city streets and country lanes yet with a class leading 4,500 kg payload it can get almost any route completed. The MDS-15 is available in either "GT" (Ground Tip Tunnel) or "H" (Internal Feed with Cart Tipper) model ...
-
PremiumDistributed by 3R-Machinery (by Shred-Tech)based in USA
The compact MDS-12 model was designed with urban cities such as London, Dublin and Amsterdam in mind. Its maneouverability combined with a throughput of up to 2,041 kgs/hour and legal payload up to 3,200 kgs makes this truck productive and profitable. The MDS-12 is not only a perfect inner-city shredding truck, it"s lower operating cost ...
-
PremiumDistributed by 3R-Machinery (by Shred-Tech)based in USA
The compact MDS-1-UK/EU model was designed with urban cities such as London, Dublin and Amsterdam in mind. Its maneouverability combined with a throughput of up to 2,041 kgs/hour and legal payload up to 3,200 kgs makes this truck productive and profitable. The MDS-1-UK/EU is not only a perfect inner-city shredding truck, it’s lower ...
-
PremiumDistributed by 3R-Machinery (by Shred-Tech)based in USA
The perfect blend of shredding performance and affordability make the MDS-2C an industry standard. The all new MDS-2C Document Shredding Truck is available on 12, 15 & 18 tonne chassis’. Very maneuverable on tight city streets and country lanes yet with a class leading payload up to 6,500 kgs and 2,040 kgs/hr throughput it can get ...
-
PremiumDistributed by 3R-Machinery (by Shred-Tech)based in USA
The perfect blend of shredding performance and affordability make the MDS-2-EU an industry standard. The all new MDS-2-EU Document Shredding Truck is available on 12, 15 & 18 tonne chassis’. Very maneuverable on tight city streets and country lanes yet with a class leading payload up to 6,500 kgs and 2,040 kgs/hr throughput it can ...
-
PremiumDistributed by 3R-Machinery (by Shred-Tech)based in USA
Unsurpassed shredder throughput and legal payload make the MDS-3-UK/EU an industry game changer. The new MDS-3-UK/EU is the ultimate shredding truck, capable of an enormous legal payload of up to 6,500 kgs and throughput of up to 3,175 kgs/hour. The MDS-3-UK/EU’s maximum shredder & payload performance of means maximum ...
-
Manufactured by Terier s.r.o.based in CZECH REPUBLIC
The shredder is designed especialy for tires. Easy changeable knives without shredder dismounting. Small and simple knives from tool steel for shredding tires minimize operating costs to 1/4 comparing with common shredders. Special design incresases throughput for 50 % comparing with common shredders. Robust ...
-
Manufactured by Bano Recycling S.r.l.based in ITALY
The hammer mills are machines for the treatment of scrap. They are used for normal shredding of steel scrap and is part of the complete plant for demolition and production of raw second ...
-
Manufactured by Prodeva Inc.based in USA
Shreds most types of brittle plastics. Shreds steel and aluminum cans. Destroys container and product identity. Eliminates fraudulent use of products. Saves money, time, labor and space. Used by Pharmaceutical and Chemical Manufacturers, Canning Plants and Recycling Centers. Safety ...
-
Manufactured by SGM Gantry S.p.A. - SGM Magneticsbased in ITALY
such as fodder, cereals, fertilizers, foundry sand, grit, or other materials. Whereas the electromagnetic drums type TMR, MDM and PDM are predominantly used to recover the shredded steel for auto shredder facilities, as well as to clean the recovered shredded steel from copper embedded material such as rotors, transformers and ...
-
Manufactured by WENDT CORPORATIONbased in USA
The ferrous downstream system is designed to separate and recover shredded steel. For the best results, a combination of large axial pole drum magnets and air classification are used. We also offer systems utilizing a series of drum magnets if lesser quality shred is acceptable. ...
-
Manufactured by Enrestec Incbased in TAIWAN
The waste tire shredding system mainly separates rubber chips and steel wires through a shredding screen. The scrap tires are shredded into 3 cm square with a steel wire content of less than 1%, which are used as raw materials for the pyrolysis system. ...
-
Manufactured by Ecodasbased in FRANCE
Our patented process is designed to shred and sterilize infectious waste to reduce its volume, and render its components unrecognizable all in one fully enclosed and automated, stainless steel, system. It combines shredding, direct steam and high pressure to treat infectious ...
-
Manufactured by Ecodasbased in FRANCE
Our patented process is designed to shred and sterilize infectious waste to reduce its volume, and render its components unrecognizable all in one fully enclosed and automated, stainless steel, system. It combines shredding, direct steam and high pressure to treat infectious ...
-
Manufactured by Ecodasbased in FRANCE
Our patented process is designed to shred and sterilize infectious waste to reduce its volume, and render its components unrecognizable all in one fully enclosed and automated, stainless steel, system. It combines shredding, direct steam and high pressure to treat infectious ...
-
Manufactured by Zato Srlbased in ITALY
Twin-Shaft Shredder for both bulk and packed collection scrap and car. BLUE DEVIL is the only machine offered on the market specifically designed to be used in the shredding of steel scrap. The processing of steel scrap is essential for providing it with homogeneous features and high specific weight. The BLUE DEVIL twin-shaft ...
-
Manufactured by MTB Manufacturingbased in FRANCE
It consist of a horizontal conveyor equipped with a beater and a permanent-magnet overband. The combination of the two actions efficiently extracts steel pieces from the shredded product. The heights of the beater and overband can be adjusted according to the product being processed. The RMS can also be supplied with an optional second ...
-
Manufactured by Ecodasbased in FRANCE
Our patented process is designed to shred and sterilize infectious waste to reduce its volume, and render its components unrecognizable all in one fully enclosed and automated, stainless steel, system. It combines shredding, direct steam and high pressure to treat infectious ...
-
Manufactured by Columbia Steel Casting Co., Inc.based in USA
Our double beam grates maximize throughput and density with minimal flexing and bowing. When customers asked for more efficient shredder grates, we did that — and made them stronger for today’s high-horsepower ...
Need help finding the right suppliers? Try XPRT Sourcing. Let the XPRTs do the work for you