Industrial Sludge Equipment For Waste And Recycling Available In Nova Scotia
-
PremiumManufactured by BD|SENSORS GmbHbased in GERMANY
The screw-in transmitter LMK 331 has been especially designed for level and process measurement and is suitable for pressure measurement of liquids, oils and gases. Usage in more viscous or polluted media is possible because of the semi-flush pressure sensor. For the usage in aggressive media we recommended the version with PVDF pressure port. Additional features like e.g. an intrinsically safe ...
-
PremiumManufactured by SRS Crisafulli, Inc.based in USA
Agitate, mix and pump most viscous or solidified sludges from industrial, municipal and agricultural waste lagoons with a SRS Crisafulli slurry pump. The pumps also work well for refineries, municipalities and geothermal ...
-
PremiumManufactured by Ecological Laboratories, Inc.based in USA
Enhances biological performance and promotes bio-solids reduction. MICROBE-LIFT/Sludge-Away is formulated specifically for the removal of organic bottom or surface solids that are slow to degrade. Provides rapid, natural sludge and muck removal and works 80% faster than competitive products. Binds phosphate and helps with the liquification and nutrient enhancement of manure. ...
-
PremiumManufactured by Flottweg SEbased in GERMANY
Mechanical separation technology presents us and our customers with major challenges time and time again. Each process is individual and the influencing factors vary widely. As a result, an "off the peg" solution is usually impossible. Flottweg is your partner for individual solutions in mechanical separation technology. We offer you the best solution based on our technology and experience. ...
-
PremiumManufactured by ENVEAbased in FRANCE
The HOFI BOX offers an exclusive sampling system dedicated to heated analyzers. Ideal for corrosive gases. (Plug & play sampling solution for: MIR FT, MIR 9000H, Graphite 52M, Topaze ...
-
PremiumManufactured by Flottweg SEbased in GERMANY
Specialist for sludge separation: Our Flottweg C8E ...
-
PremiumManufactured by BD|SENSORS GmbHbased in GERMANY
Ceramic sensor (flush) hygienical application. The pressure transmitter DMK 351P has been designed for measuring small system pressure in the food industry and chemical industry. The DMK 351P is based on an own-developed capacitive ceramic sensor element. It features high overpressure resistance and high resistance against most of aggressive media. A variety of different process and electrical ...
-
Manufactured by Bonfilt Industry Co., Ltdbased in CHINA
The Polyester Filter Belts are specially designed filter cloth for the belt press filters, it’s a circuit belt fabric connected by SS clipper seam to be able to work continuously. The belt press filter cloth is a sturdy fabric made out of high viscosity polyester monofilament yarn on heavy-duty weaving looms and being heat set. Bonfilt’s choose superior polyester monofilament ...
-
Manufactured by Zhejiang Jushi Pump Co.,Ltdbased in CHINA
Zhejiang Jushi Pump Co.,Ltd manufacture horizontal single screw pumpstainless steel industrial sludge pump is compact, small, easy to maintain,well-adapted to medium, stable flow, also with small pressure fluctuation andstrong self-priming ability. 2. The single screw pump has metal linedwith rubber stator, which is made of various elastic material, such as NBRrubber, fluoro rubber. The screw ...
-
Manufactured by Boydel Wastewater Technologies Inc. - Electrocoagulationbased in CANADA
Heavy-duty platform for heavily loaded TSS feedwaters with up to ~3% solids. Applies dual zone electro-chemical treatment; first of electro-coagulation and then a second insitu strong electro-oxidation treatment. We observe that our dual process breaks bacterial cellular walls allowing further insitu trapped water to be released. In comparative feed water testing, where centrifuges are providing ...
-
Manufactured by BiOWiSH Technologiesbased in USA
BiOWiSH-Aqua FOG is specially formulated for wastewater or influent streams with fat, oil and grease content over 100mg/L. This product significantly improves the efficiency of aerobic treatment systems, dissolved air flotation units, oil water separators and grease ...
-
Manufactured by Anhui Tianrun Chemicals Co., Ltd.based in CHINA
Cationic polyacrylamide can widely used in application such as Municipal sludge treatment , Industrial waste water treatment, Paper-making and ...
-
Manufactured by Charter Machine Company (CMC)based in USA
The Charter Royal Screw Press is a high-efficiency rotary screw press with low power operation, allowing you to save on energy costs. Our Royal Screw Press is based upon a technology that produces sludge that is cohered to the mechanical extractor, the filtrate then ejects from the inlet part by the energy of the screw rotated at a low speed, (0.2~1.3rpm). It is comprised of the screen classified ...
-
Manufactured by Emile Egger & Cie SAbased in SWITZERLAND
The ideal pump for the economical transport of wastewater and fluids with high solids, fibrous and gas ...
-
Manufactured by ThermaFab, Inc.based in USA
The Bio-Separator is a pre-engineered, custom fabricated, flow diverting baffle. It can be manufactured using a variety of fabric reinforced coated materials. The material selection is based on the application and the chemical make-up of the waste to be treated. The Bio-Separator is fabricated to the specific length, depth, and side slope desired. Windows can be positioned to achieve the desired ...
-
Manufactured by Krohne Messtechnik GmbHbased in GERMANY
The OPTIFLUX 1050 is a cost-effective electromagnetic flowmeter (EMF) with lightweight wafer-style design. The meter is a very economical solution for simple applications with conductive liquids (≥ 5 μS/cm) involving low solid content (up to 10%). This particularly includes applications in water, wastewater, mobile applications, agriculture or firefighting where extremely high accuracy, ...
-
Manufactured by KHN Water Treatment Equipments Co., Ltd.based in CHINA
The Belt Press for Sludge Dewatering is applied to the sludge dewatering treatment of sewage, textile printing and dyeing, electroplating, paper making, leather, brewing, food processing, coal washing, petrochemical, chemical, metallurgical, pharmaceutical, ceramics and other industries. It is also suitable for the solid separation or liquid leaching process of industrial ...
-
Manufactured by MIXEL Agitateursbased in FRANCE
HYDROMIX is a sealing free agitator. This is a strongly and simply built top entry agitator that is perfectly adapted to liquid + liquid or liquid + additive blending, under atmospheric pressure and in room temperature. HYDROMIX is highly used for physico-chemical treatment in drinking water production plants (coagulation) and for sludge blending and treatment in waste water treatment plants. It ...
-
by Waterleaubased in BELGIUM
The PUTTART vertical dryer-granulator is a high capacity installation for simultaneous sludge drying and granulating and can be used for municipal and industrial sludge. The unique drying-granulating combination results in a valuable pathogen-free, easy storage fertilizer end-product. ...
-
Manufactured by Chemate Technology Co.,Ltdbased in CHINA
Polyacrylamide PAM, with the chemical formula of (C3H5NO)n and the CAS NO. of 9003-05-8, is a linear polymer. Polyacrylamide polymer has good thermal stability, can be dissolved in water in any proportion, and the aqueous solution is a uniform and transparent liquid. PAM is one of the most widely used water-soluble polymers. Because the polyacrylamide structural unit contains amide groups, which ...
Need help finding the right suppliers? Try XPRT Sourcing. Let the XPRTs do the work for you