Only show results in Virginia? Ok

Landfill Equipment Applications

  • Premium

    Aeration and mixing technologies for landfill leachate wastewater treatment

    Flexible equipment and reliable partners for evolving landfill leachate conditions. Aeration Industries understands the unpredictable nature of landfill leachate wastewater treatment due to seasonality and facility aging. We also understand how punishing leachate can be to wastewater equipment. The equipment and solutions we offer will provide the flexibility and reliability to match your operational challenges in landfill leachate wastewater treatment systems.

    By Aeration Industries International (AII) based in Chaska, MINNESOTA (USA).

  • Premium

    Landfill Leachate

    Flexible Wastewater Equipment and Reliable Partners for Punishing Landfill Leachate Conditions

    By Aeration Industries International (AII) based in Chaska, MINNESOTA (USA).

  • Premium

    Landfill Alternative Daily Cover Equipment

    Save time, labor, and SPACE in the management of your landfill. Designed specifically for use in the extreme environments of landfills, the LF120 HydroSeeder®, an exclusive FINN Landfill Solution™, is an efficient solution for applying alternative daily cover (ADC), as well as the application of materials to control odor, dust and erosion. The LF120 will cover the average open face in less than 1 hour using only one tank load. A tower discharge distance up to 180 feet allows for efficient ground coverage. Maneuvering on uneven surfaces and rough terrain is made easier by high clearance, heavy-duty tandem 10,000-pound rubber torsion suspension axles, along with tubeless, high flotation tires with a wide tread design

    By FINN Corporation based in Fairfield, OHIO (USA).

  • Premium

    Wastewater treatment solutions for waste sector

    IDRAFLOT flotation units are technological solutions which allow the separation of the suspended solids from wastewater coming from gas scrubber blow down (high concentration of SS) but also for the separation of low density compounds (oil and fats) which can be present in the streams collected by collectors. IDRAFLOT units can be easily installed also within small footprint collection centres.

    By IDRAFLOT based in Zoppola, ITALY.

  • PEHD membrane sealing systems for basins

    For reasons of environmental protection, basins often need to be leakproof, e.g. seepage basins on landfill sites. However, it can also be important to ensure, for example, that valuable water does not escape into the subsoil undetected.

    By ELD Environmental Leak Detection GmbH based in Berlin, GERMANY.

  • Waste shredding for the landfill industry

    However enormous a landfill site first appears, it is surprising how quickly - and how ineffectively - it can become full. Regardless of how bulky, resilient or abrasive the waste may be, effective shredding makes best use of the space available by considerably reducing the volume of waste. Metso shredder equipment includes three sizes of mobile shredders with a variety of mounts, all capable of providing a range of grain sizes. This makes it easy to select the most efficient and cost effective shredding solution for a wide variety of landfills.

    By Metso Recycling Equipment based in Duesseldorf, GERMANY.

  • Landfill Leachate Treatment

    Effluents from waste (leachate) are highly polluted and must be treated efficiently before they can be discharged into a municipal sewage plant or a local watercourse. Conventional treatment technologies do not suffice. Chemical processes are not economic due to the high pH buffer capacity of the leachate. Hardness and chlorides in the leachate are a problem for many plant components. Besides, process knowhow and operating experience are indispensable for an effective elimination of the harmful ammonia nitrogen. Certain processes also produce residues such as concentrates, which must be removed from the landfill body. This disposal is very expensive. WEHRLE is a reliable and experienced plant constructor for those applications. The first leachate treatment plants were built in 1991 and have been in constant operation ever since. This is not only proof of excellent technology but also for sustainable efficiency with stable, predictable, low operation costs.

    By WEHRLE Umwelt GmbH based in Emmendingen, GERMANY.

  • PEHD membrane sealing systems for landfill surface liners

    Unlike base liners, surface liners are not buried at some point under many metres of waste and instead are usually protected over the course of many years only by a 1-metre thick mineral layer. As a result, there can be uncertainty about the integrity of their leak-proofing characteristics, particularly if the land is subsequently used for other purposes; however, at the same time, repairs are also possible at reasonable cost if the location of any damage can be established.

    By ELD Environmental Leak Detection GmbH based in Berlin, GERMANY.

  • Landfill lining

    GCLs have become the gold standard clay component of composite lining systems used in industrial, hazardous and municipal solid waste landfills. Used alone or in combination with a geomembrane in a composite cover system, GCLs provide significantly lower permeability, improved ease of installation, an increased amount of usable space. In many cases GCLs are more cost-effective than traditional compacted clay liners. GCLs are also not subject to deterioration from differential settlement and freeze-thaw cycles, which can damage traditional compacted clay liners. Important design considerations for GCLs in landfill caps include confining pressure, and potential for ion exchange and desiccation.

    By CETCO based in Hoffman Estates, ILLINOIS (USA).

  • PEHD membrane sealing systems for landfill base liners

    There are several phases of preparation of landfill base liners, starting with the positioning of the membrane, until these can be covered with several metres of refuse. These membranes may be damaged during preparation, but can also be inspected and repaired. It is advisable to undertake inspections at regular intervals.

    By ELD Environmental Leak Detection GmbH based in Berlin, GERMANY.

  • Cover and Liner Systems for Landfill Applications

    lEC works closely with engineers and contractors on the design, layout and installation of landfill caps and leachate liners. Our experienced crews have successfully installed geomembrane in some of the most challenging basins and shapes and in some of the harshest conditions around the world.


    Our fleet of trucks, trailers and equipment are designed to meet virtually any need. We test every weld and record the results for full accountability and quality assurance, which provide our customers with specific locations and corresponding test results.

    We are interested in learning more about your needs and unique requirements. To learn more about our products and services or to request additional information, call us today!

    By Industrial & Environmental Concepts, Inc. (IEC) based in Lakeville, MINNESOTA (USA).

Need help finding the right suppliers? Try XPRT Sourcing. Let the XPRTs do the work for you