Landfill Gas Applications

21 Results found
Only show results available in Virginia?
OK
  • Category: Waste & Recycling ×

  • Subcategory: Landfill Gas ×

Air pollution control for the landfill methane remediation industry

by Catalytic Products International (CPI)     based in Lake Zurich, ILLINOIS (USA)

Methane gases used for electric generation or pipeline gas synthesis via membrane or pressure swing adsorption (PSA) processes – commonly use incinerators for air pollution control needs.

Flaring Solutions for the Landfill Industry - Leachate Evaporation

by ABUTEC LLC     based in Kennesaw, GEORGIA (US) (USA)

Increased concern for the environment has led to new opportunities for landfills to better manage their waste gas. ABUTEC works with the landfill industry to ensure that leachate evaporation is handled in the most efficient way possible. ABUTEC’s high temperature enclosed combustors meet state and federal regulations for burning landfill waste gas at a minimum of 99% destruction and removal efficiency (DRE), meaning almost 100 percent of the vapor to be destroyed is converted to CO and water. These combustors are of high quality, flexibility, low emissions, CSA-approved and able to burn very low calorific gas. When combined with a heat exchanger, the unit can efficiently evaporate the leachate eliminating the need for expensive trucking or disposal.

Flaring Solutions for Gas Processing Facilities

by ABUTEC LLC     based in Kennesaw, GEORGIA (US) (USA)

ABUTEC’s proprietary technology was designed to provide cost-competitive solutions and the industry’s lowest operating costs and cost of ownership. Our uniquely engineered burner system offers a significant reduction in make-up fuel over premixed surface combustion systems, thermal oxidizers or traditional pipe flares. In addition, we meet EPA requirements for 40 CFR 60.18 and local BACT (Best Available Control Technology) and MACT (Maximum Achievable Control Technology) at the state and local levels. We will perform a complete return-on-investment analysis for you while showing you your total cost of ownership.

Flaring Solutions for the Petrochemical & Refinery Industry

by ABUTEC LLC     based in Kennesaw, GEORGIA (US) (USA)

ABUTEC’s goal in the petrochemical and refinery industry is to save you money. ABUTEC’s vapor combustor and enclosed flare line offers flexible and resilient burner technology to handle heavy hydrocarbon gases down to low quality or inert gases. We will save you money on capital costs and we will offer you a very fast payback (as low as 2 months) based on reducing the amount of make-up fuel and pilot gas required. This revolutionary technology is designed for you!

Odour & emission control for muncipal landfills

by Rusmar Inc.     based in West Chester, PENNSYLVANIA (USA)

Mechanical barriers that seal in odors, volatile organic compounds (VOCs), volatile nitrogen compounds (such as ammonia), volatile sulfur compounds (such as H2S) and, of course, fugitive dusts in municipal landfills.

Measurement solution for siloxane monitoring in biogas and landfill

by Protea Limited     based in Middlewich, UNITED KINGDOM

The generation of electricity from municipal digesters and land fill is of increasing interest, as the biogas can allow for a form of renewable energy. Organosilicon compounds often find their way into land-fill or digester gases as siloxanes. Siloxanes are low-level hazards to the atmosphere in terms of their emissions, however when they are combusted in gas engines the hard silica that is produced is very harsh to the moving parts of the gas engine.

Odor control solutions for solid waste industry

by Ecolo Odor Control Technologies     based in Toronto, ONTARIO (CANADA)

Today in modern society we generate waste and and we generate it in vast quantities. Professionals around the world are dedicated to processing this material as efficiently as possible. Efficient processes and higher population density increase the risk of affecting the quality of life of workers, neighboring communities and the overall population.

Landfill leachate wastewater treatment

by ENCON Evaporators     based in Hooksett, NEW HAMPSHIRE (USA)

Landfill leachate is the runoff water that occurs from operational or closed landfills. This water flows at lower rates on dry days when naturally occurring moisture percolates out and at higher rates on rainy days when the leachate waters are combined with stormwater.

Methane and Carbon Dioxide Sensing for Landfill Applications

by Edinburgh Instruments Ltd     based in Livingston, UNITED KINGDOM

Application: In March 1986 an explosion destroyed a bungalow adjacent to a landfill site in Loscoe, Derbyshire. Subsequent measurements showed that 150-200 cubic meters of gas per hour were being generated by landfill waste. This event triggered a change in the way the waste industry considered and regulated gas generated at landfill sites; resulting in the landfill regulations of 2002, and in particular LFTGN03: the Guidance on the Management of landfill Gas.

Activated carbons for air and gas industry

by Carbon Activated Corporation     based in Compton, CALIFORNIA (USA)

Carbon Activated Corp. supplies carbon and related services to various vapor phase applications such as odor control in municipal waste-water facilities, landfills and refineries, SVE (soil vapor extraction) projects and many other vapor related applications. We manufacture specialized carbon both impregnated and non-impregnated for applications such as H2S removal and the removal of any time of noxious gases.

Cogeneration (digester & landfill gas) flow solutions

by Sierra Instruments, Inc.     based in Monterey, CALIFORNIA (USA)

As an industry leader in Clean Energy flow applications, our thermal mass flow meters are used extensively in measuring digester and landfill gas, making electricity from waste.

Flow meters for the environmental flow solutions

by Sierra Instruments, Inc.     based in Monterey, CALIFORNIA (USA)

Our flow measurement technology is ideal for applications ranging from landfill emissions to wastewater treatment and numerous applications in between. We have developed many flow meters and controllers to measure the emissions from landfills and other green house gas producers, in addition to being a long standing leader in the testing of emissions for large engines. Water treatment is also an important driver for the company as we continue to develop innovative solutions for waste water treatment.

Air pollution control for the remediation industry

by Anguil Environmental Systems, Inc.     based in Milwaukee, WISCONSIN (USA)

Thermal and catalytic oxidizers are one of the primary vapor treatment technologies used in purifying harmful compounds from contaminated groundwater or soil.  Global Technologies is the remediation division of Anguil Environmental Systems focused on treating emissions that are extracted from below the earths` surface.  Formed shortly after the 1990 Clean Air Act targeted emissions associated with the extraction of polluted compounds from contaminated sites, Global subsurface remediation equipment has been successfully applied on contaminated sites in North and South America, Europe, Asia and Australia.

Gas monitoring for landfills

by Kurz Instruments, Inc.     based in Monterey, CALIFORNIA (USA)

The Kurz Insertion Mass Flow Meter products provide extremely reliable and accurate measurements with a number of features specifi cally tailored for landfi ll gas monitoring applications.

Gas Sensing for Landfill

by Edinburgh Instruments Ltd     based in Livingston, UNITED KINGDOM

In March 1986 an explosion destroyed a bungalow adjacent to a landfill site in Loscoe, Derbyshire. Subsequent measurements showed that 150-200 cubic meters of gas per hour were being generated by landfill waste. This event triggered a change in the way the waste industry considered and regulated gas generated at landfill sites; resulting in the landfill regulations of 2002, and in particular LFTGN03: the Guidance on the Management of landfill Gas. The regulations, which run to 128 pages, describe the management and control of landfill sites, and define landfill gas as being all the gas generated from landfill waste. This includes gases generated by biodegradation of waste and gas arising from chemical reactions and the volatilisation of chemicals from the waste. These regulations require that for every landfill site, a gas management plan is put in place to ensure: • Landfill gas must be collected from all landfills receiving biodegradable waste and the landfill gas must be treat

Solutions for Safe disposal during Emergencies, leakages, Tank Cleaning operations

by Synchronous International Engineering Solutions Co. Ltd.     based in Bangkok, THAILAND

For temporary installation of a are, needed for only a short time in one place to handle localized waste gas disposal problem. SIES offers skid-mounted Mobile Flares Units to allow mobility. Such types of systems are useful for Gas pipe line/ Gas distribution network within a large plant (Petrochemical & Refineries) & Landfills. SIES design & Supply Mobile Flare for Oil and Gas industry, Waste gases, LFG operations and tank Cleaning operations. The Flares have inbuilt capabilities to handle wide variety of gas with full safety and precaution as per API Standards..

Flaring Solutions for the Landfill Industry - Landfill Gas Combustor

by ABUTEC LLC     based in Kennesaw, GEORGIA (US) (USA)

As the need for reliable alternative energy sources increases, industries all over the world are looking for ways to fuel business while having the smallest impact on the environment. At ABUTEC, we’re proud to be part of this shifting focus on alternative energy sources, and offer solutions for waste-to-energy systems that can put waste gas to work for your plant.

Flaring Solutions for the Upstream Oil & Gas Industry - Oil & Gas Produced Water

by ABUTEC LLC     based in Kennesaw, GEORGIA (US) (USA)

Because of the huge increase in U.S. natural gas production, there is elevated concern over the production of water that occurs in natural gas and oil fields. These concerns have led to additional state and federal regulations for low emission combustion technology and how companies will deal with produced water. ABUTEC’s high temperature enclosed combustors meet state and federal regulations for burning waste gas at a minimum of 99% destruction and removal efficiency (DRE), meaning almost 100 percent of the vapor to be destroyed is converted to CO2 and water. These combustors are of high quality, flexibility, low emissions, CSA-approved and able to burn very low calorific gas. Additionally, when combined with a heat exchanger, the unit can evaporate the excess produced water eliminating the need for expensive trucking or disposal.

Flaring Solutions for Ethanol Loadout

by ABUTEC LLC     based in Kennesaw, GEORGIA (US) (USA)

ABUTEC’s proprietary technology was designed to provide cost competitive solutions and the industry’s lowest operating costs and cost of ownership. Our uniquely engineered burner system offers a 33% reduction in make-up fuel over premixed surface combustion systems or traditional nozzle burners. In addition, we meet state and federal requirements for 40 CFR 60.18 and local BACT (Best Available Control Technology) and MACT (Maximum Achievable Control Technology). Whether you are looking for vapor combustors, enclosed flares, ethanol loadout flares, truck loadout flares, loading terminal flares, emergency flares, or marketing terminal flares, contact us for reliable, safe solutions.

Need help finding the right suppliers?

Let the XPRTs do the work for you