landfill gas generation (Landfill Gas) equipment available in Lithuania

  • Premium

    Multitec - Model 540 - Multi-Gas Measuring Device

    Multiple gas measuring device with infrared sensors - optimised for biogas and landfill gas. Biological processes generate gas compositions that make special demands on measuring equipment. The robust Multitec 540 provides the ability to measure six gases simultaneously. The use of infrared measuring techniques for methane and carbon dioxide means ...

    By Hermann Sewerin GmbH based in G├╝tersloh, GERMANY. from Landfill and Biological Gas Product line

  • Landfill Gas

    Landfill gas is created during the anaerobic decomposition of organic substances in municipal solid waste (MSW) and commercial and industrial (C&I) wastes. Depending upon the landfill design and its management, as well as waste composition, compaction, moisture and several other factors, thousands of landfills are available worldwide to ...

    By Clarke Energy based in Liverpool, UNITED KINGDOM. from Biological Gases Product line

  • HOFGAS - Model Sparky - Compact Degassing Unit

    The HOFGAS- Sparky compact degassing unit is used for household waste landfills without gas utilisation.

    By Hofstetter BV based in Schiphol-Rijk, NETHERLANDS. from Landfill Gas Product line

  • HOFGAS - Model Ready - Land Gas Collection System - Preparation Unit for Gas Utilisation

    The HOFGAS-Ready is a complete extraction and gas flaring system for safe and economic degassing of landfill sites. The gas is collected continuously and prepared for further use. The installation can be equipped with a gas utilisation connection for the purpose of energy recovery.

    By Hofstetter BV based in Schiphol-Rijk, NETHERLANDS. from Land Gas Collection System - Preparation Unit for Gas Utilisation Product line

  • Pro2 - Landfill Gas

    The safe collection and disposal of landfill gas is a sensitive topic. Released uncontrolled, it represents a health hazard and a danger to the climate and environment. Used wisely, the fuel can be converted into an energy resource. Approximately 150-250m³ of landfill gas is created per ton of decomposed domestic waste. This is chiefly ...

    By Pro2 Anlagentechnik GmbH based in Willich, GERMANY. from Co-Generation Power Plants Product line

  • HOFGAS - Model Ready/C - Landfill Gas Extraction and Flaring Station

    The HOFGAS- Ready/C is an extraction and flaring station for the safe and economic degassing of landfill sites.

    By Hofstetter BV based in Schiphol-Rijk, NETHERLANDS. from Landfill Gas Extraction and Flaring Station Product line

  • Ammonia Stripping Systems

    Remove ammonia from leachate with a physical process, use can be made of landfill gas to heat leachate, or removal can be facilitated with pH adjustment

    By Organics Group plc based in Coventry, UNITED KINGDOM. from Leachate Systems Product line

  • Gas Collectors

    The gas collector is the part of the system that draws the gas from the ground. Perforated tubes are installed in the landfill and are connected to the collecting/generating station using a specially developed system. Our gas collectors have a simple, robust and cost-effective design that enables fast installation in the landfill site.

    By Biogas Systems AB based in Sunne, SWEDEN. from Landfill Gas Product line

  • Gas Booster Sets

    Our landfill gas fuel skids are specifically designed and manufactured for landfill gas pumping applications to ensure long-term reliability in processing landfill gas. We use tried and tested technology to ensure maximum uptime and therefore maximum revenue generation from the landfill gas.

    By Automatic Flare Systems Limited (AFS) based in Coventry, UNITED KINGDOM. from Flare systems Product line

  • Multriwell - Durable Gas Extraction

    Multriwell is the new and effective solution for landfill gas extraction. This innovative technology enables landfill operators to extract considerably more gas compared to when traditional gas wells are used. The patented system consists of three components: short distance flexible vertical gas wells that are installed in very small grids, ...

    By Multriwell B.V based in Velddriel, NETHERLANDS.

  • WT - Landfill Gas Collection System

    WT ENERGY SMEA provides landfill gas (LFG) collection systems for existing landfills, designed to capture the gas produced by decomposing waste before it impacts the environment, and utilize it as a fuel source for electrical generation.

    By WT Energy SMEA S.r.l based in Repubblica di San Marino, ITALY. from Other Products Product line

  • Model 2 MW (KG2-3GEF/PO) - Power Oxidizer Powerstation

    The Dresser-Rand Power Oxidizer 2 MW (KG2-3GEF/PO) Powerstation’s gas turbine with Ener-Core Power Oxidizer technology is the only clean power generation that runs directly on lowpressure, low-quality gases that otherwise could not be used. The system integrates oxidation technology with the field proven 2MW-KG2-3G gas turbine, to ...

    By Ener-Core, Inc. based in Irvine, CALIFORNIA (USA).

  • H2S Removal Technologies

    Hydrogen Sulfide (H2S) is the greatest nuisance odor as well as the most corrosive of several trace chemicals present in landfill gas. With the removal of H2S from the gas stream overall production efficiency is increased and repair costs to pipes and power generating equipment are greatly reduced. Hydros and our engineering partners can design ...

    By Hydros, Inc., Environmental Diagnostics based in Bourne, MASSACHUSETTS (USA). from Other Products Product line

  • FURY - Model 400 - Evaporative Systems

    To learn more about Aston Evaporative Systems patented, revolutionary technology, designed to solve Global wastewater treatment and industrial evaporation concerns for landfill, oil & gas, mining, food & beverage, disaster relief and many other industries, please fill out the form below! The Aston Fury-400 atomizes 20 gpm/ 75 lpm of ...

    By Aston Evaporative Services based in Grand Junction, COLORADO (USA).

  • HDPE Pipe Fittings

    Manufactured of newest generation PPI and NSF listed material, Agru’s HDPE Pipe Fittings set the standard. All fittings meet the requirements of ASTM D3261, ASTM D2513, NSF 61, and AWWA C901 and C906. Corrosion and chemical resistant, Agru’s PE Pipe Fittings offer superior flow characteristics while being light weight and more flexible ...

    By Agru America, Inc. based in Georgetown, SOUTH CAROLINA (USA). from Pipe and Fitting Systems Product line

Need help finding the right suppliers? Try XPRT Sourcing. Let the XPRTs do the work for you