Landfill Leachate Treatment Equipment For Waste And Recycling Available In Quebec
-
PremiumManufactured by Intecna srlbased in ITALY
Innovative methods are continuously required in water purification of a wide range of wastewater pollutants especially in case of difficult approach. Electrocoagulation system optimised by INTECNA, provides a relatively compact and robust wastewater treatment plant alternative in which special alloy metal anodes initiate electrochemical reactions that provide active metal cations for coagulation ...
-
PremiumManufactured by Hydro Quip, Inc. (HQI)based in USA
One of the ways to remove volatile organic compounds (VOCs) from wastewater is to use a pack tower air stripper. The pack tower is a counter-current design where the wastewater is injected at the top of the tower and the air is introduced at the bottom. In the middle of the tower, the packing material agitates the water and strips the contaminants. The contaminants are then released either to the ...
-
PremiumManufactured by Intecna srlbased in ITALY
Throughout the last ten years, several experimental works about the Ferrates laboratory and pilot production process and their application have been published. Ferrates showed a very high oxidant capacity, for the state of oxidation, especially for of the iron (VI) (SODIUM FERRATE), which sparked a remarkable interest in its applications both for disinfection and for especially difficult to be ...
-
Manufactured by UNISOL Membrane Technologybased in CHINA
DTRO/STRO membrane technology is a major advancement in the field of membrane module technology. With more than 10 years of practical experience in industrial membrane technology, UNISOL has continuously developed a series of products and systems, widely used in landfill leachate treatment, desulfurization wastewater treatment, coal chemical wastewater, and oil and gas field wastewater ...
-
Manufactured by Beijing Yingherui Environmental Technology Co., Ltd.based in CHINA
Anaerobic reactor is the core equipment for organic solid waste treatment and high-concentration organic wastewater treatment. It has low energy consumption, high organic load, and can produce biogas. YHR can customize anaerobic reactors according to different water quality characteristics, including: CSTR, UASB, IC, UBF, ...
-
Manufactured by QED Environmental Systems, Incbased in USA
The AP2 Bottom Inlet Short and the AP2 Top Inlet Short AutoPumps both provide maximum capabilities and flow in a pump for 2“ (50 mm) diameter ...
-
Manufactured by EcoGreenText, Inc.based in USA
EcoGreenText’s Non woven Geotextiles are fibrous sheets in which the fibers can be almost randomly orientated. These materials are manufactured from either staple fibers (synthetic or natural) or continuous filaments of PP or PET which are randomly distributed in layers onto a moving belt to form a 'web' of assembled fibers; blends of PP and PET staple fibers are also used. With staple ...
-
Manufactured by Jiangsu Jiuwu Hi-tech Cobased in CHINA
The flat ceramic membrane is a new type of high temperature plate porous ceramic membrane, which is prepared by high temperature sintering process using inorganic materials such as alumina. Compared with the organic film, ceramic flat membrane has the advantages of good chemical stability, good reliability, long service life and strong anti-pollution ...
-
Manufactured by Performance Pipe, A Division of Chevron Phillips Company LPbased in USA
DriscoPlex 6400 pipe is available to meet your needs in compliance with ASTM D2513 and API 15LE product standards.Produced from only the highest rated HDPE pipe material, DRISCOPLEX® 6400 Series pipe is manufactured from PE4710 resin as listed in PPI-TR4 and is known for its durability, chemical and abrasion ...
-
Manufactured by Mixing Systems, Inc.based in USA
High chrome construction for abrassion resistance flange connection for sludge ...
-
Manufactured by GEOfabrics Limitedbased in UNITED KINGDOM
Protexia GPT geocomposites comprise longitudinal band drains incorporated within, or on one side of, a geotextile to provide low-cost area drainage and protection to a membrane. The drains are typically at 0.5m or 1.0m centres across the roll width and continuously along the entire length of the roll. These products are used extensively to replace expensive mineral layers where the requirement is ...
-
Manufactured by KAMPS s.a.based in BELGIUM
ZeeWeed based wastewater and water treatment is a low energy immersed membrane process that consists of Outside-in, hollow-fiber modules immersed directly in the feed-water. The small pore size of the ZeeWeed membranes ensures that no particulate matter will pass into the treated water stream. Thereby the ZeeWeed ultrafiltration membrane system can easily remove particles and suspended solids. ...
-
Manufactured by Center Enamelbased in CHINA
After firing at 820°C-930°C high temperature, the molten glass reacts with the steel plate surface to form an inert and inorganic bond, which combines the strength and flexibility of steel and outstanding corrosion resistance of glass, so Glass-Fused-to-Steel tanks can provide many advantages over standard epoxy or welded painted storage tanks. Glass-Fused-to-Steel technology is the ...
-
Manufactured by Jiangsu Jiuwu Hi-tech Cobased in CHINA
The SS ceramic membrane module is designed by different applications. Stainless steel could be used as the material of module/housing, that is, ss membrane housing. JIUWU company could produce the extra large stainless steel membrane housing as customer demand, such as loading over 91 pcs membranes. It also can be 1, 3, 7, 12, 19, 37, 61, 76, 91, 138, 241 pcs membranes. ...
-
Manufactured by Ennovobased in AUSTRALIA
Management of leachate is critical in landfill applications, not only from an environmental compliance aspect, but also failure to deliver appropriate leachate management impacts on gas collection and control. We supply a range of landfill leachate treatment systems depending on specific requirements. ...
-
Manufactured by Singhal Industries Private Limitedbased in INDIA
We, Singhal Industries Pvt Ltd, are well-known and reputed manufacturers of premium quality Geonets, also called as Geospacer. Geonets can be manufactured with almost all polymeric materials, and it is widely used to strengthen the fill material and used for road repair, construction and enhance the quality of road surface. Our Geonets are manufactured using superior quality HDPE ...
-
Manufactured by Aquarion Products GmbHbased in AUSTRIA
Circular Disc (CD) Modules are optimized membrane modules that are ideally suited for the treatment and reuse of highly contaminated wastewaters, produced water treatment, landfill leachate treatment, minimal liquid discharge (MLD) and zero liquid discharge (ZLD). One of the key objectives of environmental protection is the reduction of wastewater volumes up to complete avoidance of any ...
-
Manufactured by BioprocessH2Obased in USA
Process Capabilities: Efficient Reduction of BOD. Nitrification of Ammonia. ...
-
Manufactured by Memsift Innovations Pte Ltd.based in SINGAPORE
For efficient thermal membrane separation process, the membrane should ideally exhibit several optimum characteristics in terms of membrane thickness, membrane porosity, membrane pore size, chemical and thermal stability, membrane surface chemistry (hydrophobicity) and high liquid entry pressure (LEP). We have a highly hydrophobic hollow fiber membrane with unique surface chemistry for vapor and ...
-
Organized by The Water and Energy Exchange Ltd.based in UNITED KINGDOM
ULTURA is the new brand name for the combined Rochem, Sepro Membranes and APTwater businesses and is formally launched as one unified offering on February 24, 2014. ULTURA represents the ultimate in high recovery membrane technologies and where other membrane technologies struggle to deliver, ULTURA has a world-class reputation for performance, low maintenance, extraordinary service levels and ...
Need help finding the right suppliers? Try XPRT Sourcing. Let the XPRTs do the work for you