Landfill Leachate Treatment Equipment For Waste And Recycling Available In Maldives
-
PremiumManufactured by Intecna srlbased in ITALY
Throughout the last ten years, several experimental works about the Ferrates laboratory and pilot production process and their application have been published. Ferrates showed a very high oxidant capacity, for the state of oxidation, especially for of the iron (VI) (SODIUM FERRATE), which sparked a remarkable interest in its applications both for disinfection and for especially difficult to be ...
-
PremiumManufactured by Intecna srlbased in ITALY
Innovative methods are continuously required in water purification of a wide range of wastewater pollutants especially in case of difficult approach. Electrocoagulation system optimised by INTECNA, provides a relatively compact and robust wastewater treatment plant alternative in which special alloy metal anodes initiate electrochemical reactions that provide active metal cations for coagulation ...
-
PremiumManufactured by Hydro Quip, Inc. (HQI)based in USA
One of the ways to remove volatile organic compounds (VOCs) from wastewater is to use a pack tower air stripper. The pack tower is a counter-current design where the wastewater is injected at the top of the tower and the air is introduced at the bottom. In the middle of the tower, the packing material agitates the water and strips the contaminants. The contaminants are then released either to the ...
-
Manufactured by QED Environmental Systems, Incbased in USA
The AP2 Bottom Inlet Short and the AP2 Top Inlet Short AutoPumps both provide maximum capabilities and flow in a pump for 2“ (50 mm) diameter ...
-
Manufactured by Beijing Yingherui Environmental Technology Co., Ltd.based in CHINA
Anaerobic reactor is the core equipment for organic solid waste treatment and high-concentration organic wastewater treatment. It has low energy consumption, high organic load, and can produce biogas. YHR can customize anaerobic reactors according to different water quality characteristics, including: CSTR, UASB, IC, UBF, ...
-
Manufactured by UNISOL Membrane Technologybased in CHINA
DTRO/STRO membrane technology is a major advancement in the field of membrane module technology. With more than 10 years of practical experience in industrial membrane technology, UNISOL has continuously developed a series of products and systems, widely used in landfill leachate treatment, desulfurization wastewater treatment, coal chemical wastewater, and oil and gas field wastewater ...
-
Manufactured by GEOfabrics Limitedbased in UNITED KINGDOM
Protexia GPT geocomposites comprise longitudinal band drains incorporated within, or on one side of, a geotextile to provide low-cost area drainage and protection to a membrane. The drains are typically at 0.5m or 1.0m centres across the roll width and continuously along the entire length of the roll. These products are used extensively to replace expensive mineral layers where the requirement is ...
-
Manufactured by Mixing Systems, Inc.based in USA
High chrome construction for abrassion resistance flange connection for sludge ...
-
Manufactured by Besta Membranebased in CHINA
The Suez 500D mbr membrane module is a membrane module in a membrane bioreactor (MBR). Its main function is to separate impurities such as solid suspended matter, colloid, bacteria and macromolecular organic matter in sewage from water through the separation of membrane, so as to achieve the purification of water ...
-
Manufactured by KAMPS s.a.based in BELGIUM
ZeeWeed based wastewater and water treatment is a low energy immersed membrane process that consists of Outside-in, hollow-fiber modules immersed directly in the feed-water. The small pore size of the ZeeWeed membranes ensures that no particulate matter will pass into the treated water stream. Thereby the ZeeWeed ultrafiltration membrane system can easily remove particles and suspended solids. ...
-
Manufactured by Jiangsu Jiuwu Hi-tech Cobased in CHINA
The flat ceramic membrane is a new type of high temperature plate porous ceramic membrane, which is prepared by high temperature sintering process using inorganic materials such as alumina. Compared with the organic film, ceramic flat membrane has the advantages of good chemical stability, good reliability, long service life and strong anti-pollution ...
-
Manufactured by Memsift Innovations Pte Ltd.based in SINGAPORE
TS-30 is a Zero Liquid Discharge (ZLD) system in which 100% water and the valuable resources(products, acid, salts and precious metals) can be recovered. As there is zero discharge at the end, the process will also help to reduce the environmental ...
-
Manufactured by EcoGreenText, Inc.based in USA
EcoGreenText’s Non woven Geotextiles are fibrous sheets in which the fibers can be almost randomly orientated. These materials are manufactured from either staple fibers (synthetic or natural) or continuous filaments of PP or PET which are randomly distributed in layers onto a moving belt to form a 'web' of assembled fibers; blends of PP and PET staple fibers are also used. With staple ...
-
Manufactured by Performance Pipe, A Division of Chevron Phillips Company LPbased in USA
DriscoPlex 6400 pipe is available to meet your needs in compliance with ASTM D2513 and API 15LE product standards.Produced from only the highest rated HDPE pipe material, DRISCOPLEX® 6400 Series pipe is manufactured from PE4710 resin as listed in PPI-TR4 and is known for its durability, chemical and abrasion ...
-
Manufactured by Memsift Innovations Pte Ltd.based in SINGAPORE
For efficient thermal membrane separation process, the membrane should ideally exhibit several optimum characteristics in terms of membrane thickness, membrane porosity, membrane pore size, chemical and thermal stability, membrane surface chemistry (hydrophobicity) and high liquid entry pressure (LEP). We have a highly hydrophobic hollow fiber membrane with unique surface chemistry for vapor and ...
-
Manufactured by BioprocessH2Obased in USA
Process Capabilities: Efficient Reduction of BOD. Nitrification of Ammonia. ...
-
Organized by The Water and Energy Exchange Ltd.based in UNITED KINGDOM
ULTURA is the new brand name for the combined Rochem, Sepro Membranes and APTwater businesses and is formally launched as one unified offering on February 24, 2014. ULTURA represents the ultimate in high recovery membrane technologies and where other membrane technologies struggle to deliver, ULTURA has a world-class reputation for performance, low maintenance, extraordinary service levels and ...
-
based in AUSTRALIA
Airwell pumping systems are used extensively in leachate recovery both in Australia and overseas. Uses include the detection and recovery from leaks in residue ponds, tailings dams and landfill sites. We have experience in developing systems for both hazardous and non-hazardous environments. The low flow capabilities of the Airwell system as well as its ability to handle grit, silt and iron oxide ...
-
Manufactured by Blackhawk Technology Companybased in USA
The V-2 Pneumatic Piston Pump is Blackhawk’s most versatile pneumatic. It is designed for the broadest range of pumping applications and environments, including hot or harsh landfill leachate, gas-well dewatering, condensate-recovery sump and hydrocarbon remediation. Model 101 maintains steady flow to depths of 555 feet (169 ...
-
Manufactured by QED Environmental Systems, Incbased in USA
The AutoPump AP4+ Aggressive Fluids Model features upgraded materials for many parts to further extend the service life of the pump and to broaden the range of conditions each model can be used in. All nonmetallic internal parts are PVDF*, a high-grade engineering plastic with higher strength at elevated temperatures and extremely broad chemical resistance, including acidic and oxidizing cleaning ...
Need help finding the right suppliers? Try XPRT Sourcing. Let the XPRTs do the work for you