Landfill Leachate Services For Waste And Recycling Available In Swaziland
-
PremiumManufactured by CETCObased in USA
Leading the wastewater treatment market for more than 35 years with one-step flocculant technology and quality service. CETCO’s Wastewater Treatment Division provides clay-based chemicals that will remove emulsified oils, heavy metals and suspended solids from water allowing economical disposal or recycling of your industrial waste stream. Our one-simple step products are backed by a wealth ...
-
PremiumManufactured by Anguil Environmental Systems, Inc.based in USA
All water treatment systems require a number of technologies to meet their effluent treatment goals. Remediation of a light non aqueous phase liquid (LNAPL) plume, for example, may require an oil-water separator, air stripper, and carbon adsorption system to meet discharge requirements. However, it is often wise to add other components to protect the primary treatment equipment, but not ...
-
based in GERMANY
Our Services in the Area of Disposal Facilities: Landfill Construction and Monitoring, Landfill Monitoring and After-care, Drainage and Leachate, Residual Materials, Treatment and Recycling, Approval Procedures and Authority ...
-
based in USA
COMPOSTING – SOLID WASTE – SOUTH AFRICA ODOR SIGNIFICANTLY REDUCED Field Results ACF-32 diluted 1:100 with fresh water Sprayed evenly at ½ Liter Dilution per m2 surface over newly dumped waste Improved organic break up in solid waste for better waste compaction Improved leachate water quality SOUTH AFRICAN HAZARDOUS LANDFILL ...
-
based in USA
Leading the wastewater treatment market for more than 35 years with one-step flocculant technology and quality service. CETCO’s Wastewater Treatment Division provides clay-based chemicals that will remove emulsified oils, heavy metals and suspended solids from water allowing economical disposal or recycling of your industrial waste stream. Our one-simple step products are backed by a wealth ...
-
Manufactured by Les Traitements Bio-Bac inc.based in CANADA
The nitrification process is a complex, sensitive, and slow reaction that requires specific environmental conditions in order to work. The most common bacterial strains involved in the transformation of ammonia to nitrate are from the genus Nitrosomonas and Nitrobacter. These sensitive strains require a strict aerobic environment and sufficient alkalinity to perform the conversion. They are slow ...
-
Manufactured by Enviro Cover - a brand by Environmental Products Inc.(EPI)based in USA
Enviro Cover film is a nonreusable impermeable material without interconnected pores. It does not allow fluids to flow through and is an excellent barrier to water infiltration. The overlap between Enviro Cover panels are compression sealed by ballast material. As a result, Enviro Cover deployed on the working face forms a continuous barrier that can capture as much as 97% of precipitation as ...
-
based in UNITED KINGDOM
SLR has a highly qualified and experienced team of engineers that can provide a wide range of capabilities including general infrastructure, heavy civil engineering and building structure ...
-
Manufactured by aquen aqua-engineering GmbHbased in GERMANY
Landfill leachate contains a cocktail of various pollutants. In addition to biodegradable nitrogen compounds, this also includes a large number of other organic and inorganic pollutant groups that are fully or partially non-biodegradable. These substances have to be removed from the landfill leachate through cost-intensive chemical/physical treatment. ...
-
by COWI A/Sbased in DENMARK
COWI is an active player in the development of modern solid waste handling and disposal systems including sanitary landfills. The final destination for waste which cannot be recycled or recovered is a sanitary landfill. A modern sanitary landfill, however, that meets today’s standards does not only include contained cells for waste deposition and leachate treatment and landfill gas ...
-
Manufactured by E3 Solutions LLCbased in USA
3 Reasons why Evaporationworks is the best solution: Reason 1: High RPM Rotary Atomization Provides Highest Enhanced Evaporation Rates. Reason 2: Droplet Size Control Allows Constant Operation. Reason 3: No Clogging or Buildup in High TDS ...
-
based in USA
While similar to humidity cell testing in some ways, these tests simulate site waste disposal conditions (such as saturated, non-saturated or partially saturated) more closely. Water is typically added in a trickle leach fashion, but periodic flushings are possible to better simulate field conditions. Analyses that can be conducted on leachate water are the same as those for humidity cell ...
-
based in GERMANY
The landfill is the final link to complete the waste disposal chain. Without special precautions, dumping untreated wastes in particular will result in serious environmental harm by polluting the groundwater and accelerating climate change. Regulations now in place in Europe stipulate that only pretreated and mineralized wastes may be landfilled. For social and economic reasons, it is not ...
-
Manufactured by GeoStream Srlbased in ITALY
The VP pumps are available in a range of configurations. The VP series is float actuated, fully automatic, self-regulating pneumatic borehole pumps that require no external form of control. The VP pumps are all designed specifically for pumping landfill leachate, landfill gas condensate, and contaminated groundwater. As no down-well level control device is required, the VP pumps lend themselves ...
-
Manufactured by Ennovobased in AUSTRALIA
Our field technicians are trained to service and maintain a range of equipment used in numerous applications. These include flares, blower systems, leachate treatment systems, monitoring equipment, pumps, loggers and nearly everything associated with landfill and anaerobic digester applications. We ensure all our field technicians have undergone specific training for the complete equipment range ...
-
Manufactured by Céramiques Techniques Industrielles (CTI)based in FRANCE
Purify, recycle, refine: a whole technology at the service of your processes. For more than 20 years, CTI has been constantly expanding its expertise to design and supply increasingly high-performing ceramic Filtration membrane for processing and recycling aqueous complexes, in increasingly demanding ...
-
based in USA
Waterstone also provides services in the following areas: National and International Regulatory Liaison. Organization and Chairing of Public Meetings. Environmental Impact Studies and Assessments. Wetlands Evaluation and Biochemical Studies. Inventory and Classification of Vegetation Communities. Vegetation Mapping and Ecosystem Delineation. Archeological and Socioeconomic Surveys. Septic System ...
-
Manufactured by ULTRA-OXYGENbased in SOUTH AFRICA
The UO+O3 solution is an EXTRA OVER OPTION should you wish to aggressively treat contaminated water. Due to the ability to supersaturate a liquid with any gas and to be able to transport it in micro and ultrafine bubbles, Ozone can now be used more effectively than ever before, mainly because of the ability to increase the contact time of the gas with impurities. (Up to ...
-
based in SWEDEN
For PFAS-contaminated water, both ion exchangers and carbon can be used, but also the new sustainable technology SAFF -Surface Active Foam fraction, where PFAS is separated from the water using air. Which method that is best suited depends on the type of PFAS substances, how big or small the flows are and the type of water. Envytech drive the development of purification techniques for PFAS in ...
-
Manufactured by Ramky Groupbased in INDIA
Ramky was the first private sector player to establish a Biomedical Waste Management facility in Hyderabad. More facilities were soon set up by the Company in other states of India. Today Ramky handles waste from over 12,000 health care establishments covering about 175,000 beds. The main modes of biomedical waste destruction that Ramky employs are (i) Sterilization using autoclaves (ii) ...
Need help finding the right suppliers? Try XPRT Sourcing. Let the XPRTs do the work for you