Landfill Remediation Equipment For Waste And Recycling Available In Germany
-
PremiumManufactured by Finn Corporationbased in USA
The revolutionary new Titan HydroSeeders provide more performance, more power and more productivity than ever before. Designed to improve overall user experience and outperform all other units with ease, the Titan provides the unique features demanded by industry experts and required to meet today’s challenging ...
-
Manufactured by ENSO Plasticsbased in USA
ENSO RESTORE’s leading edge technology accelerates the natural biodegradation of plastics, rubbers and other materials, offering a simple and effective solution to an enormous environmental challenge. Using as little as 1% ENSO RESTORE, your final product will be biodegradable for just a fraction of its manufacturing cost. Available in pellet, powder and liquid forms, RESTORE is a drop-in ...
-
Manufactured by Atmos Technologiesbased in USA
Our Bulk Storage & Dilution System (BSD-7000) is equipped to handle bulk tank truck quantities of our foam concentrate at any solid waste landfill or environmental remediation site. We’ve simplified the process with automatic dilution and metering capabilities, which eases transfers into on-board storage tanks. The system is also freeze protected and insulated, allowing for year-round ...
-
Manufactured by QED Environmental Systems, Incbased in USA
The AP4+ was made easier to clean by using 3 bolts to attach the pump inlet and open up the pump. This is easier than having to rotate the inlet multiple turns to unthread it from the center tube inside the pump, especially under field conditions of silt, deposits and coatings. Removing the inlet is also aided by the new, precision ID pump casing, ensuring a more controlled fit. The new pump ...
-
Manufactured by QED Environmental Systems, Incbased in USA
The increased availability of special drilling equipment has caused more landfills and cleanup projects to appreciate the unique advantages of low-angle wells or risers where conventional vertical wells are inefficient or impossible to use. Sloped landfill risers for leachate and/or landfill gas allow wellhead installations and other equipment to be placed outside landfill cells, not in the ...
-
Manufactured by QED Environmental Systems, Incbased in USA
The AP2 Bottom Inlet Short and the AP2 Top Inlet Short AutoPumps both provide maximum capabilities and flow in a pump for 2“ (50 mm) diameter ...
-
Manufactured by QED Environmental Systems, Incbased in USA
The AP4+ Top Inlet Short, AP4+ Low Drawdown Top Inlet, AP4+ Bottom Inlet Short and AP4+ Low Drawdown Bottom Inlet AutoPump provide maximum capabilities and flow in a pump for 4” (100mm) diameter and larger wells and the need for an elevated inlet, such as pumping total fluids from wells contaminated with ...
-
Manufactured by QED Environmental Systems, Incbased in USA
The Easy Fitting Quick-release Connectors is a new type of lower-cost, quick fitting for the AutoPump (Patent Pending), designed for severe duty downwell conditions at landfills and remediation sites. The Easy Fitting allows the AutoPump to be quickly disconnected from its tubing and hose sets, eliminating the need to cut the tubing. Constructed of high-quality, stainless steels the Easy Fitting ...
-
Distributed by Oak Environmental Inc.based in CANADA
Oak Environmental's regenerative vacuum/blower units (VAC-R) are carefully designed for today's soil venting requirements. These quiet and dependable VAC-R units are ideally suited for use in sensitive areas where in-situ treatment is preferred. We have VAC-R units for: Vapour extraction, soil remediation, landfill degassing, aeration, radon removal, ...
-
Manufactured by Erdwich Zerkleinerungs-Systeme GmbHbased in GERMANY
The specialist for coarse materials. When processing coarse materials such as electronic scrap, refrigerating devices or die-cast aluminium parts, it is important to keep the individual components as intact as possible and to process them gently, in addition to maximum process reliability and performance. This is where our RM 1350/2 and RM 1800/2 twin-shaft rippers prove what they are capable of: ...
-
Manufactured by Continental Biomass Industries, Inc. (CBI)based in USA
This TAPER-SLOT Screen is commonly utilized for the classification of bulky materials. The TAPER-SLOT Screen performs where other screens fail. It is the preferred alternate to inherently problematic screens such as Finger Screens, perforated screens, wire mesh screens, ...
-
Manufactured by Macpresse Europa S.R.Lbased in ITALY
Ideal to shred waste paper, the MAC 1000 model is fitted with a single fast rotor and fixed hammers for high hourly output and easily shreds material in thick and bulky packs such as bundled newspapers. To get a balanced output between baler and shredder we recommend coupling this model with the MAC 106 ...
-
Manufactured by QED Environmental Systems, Incbased in USA
The AutoPump AP4+ Aggressive Fluids Model features upgraded materials for many parts to further extend the service life of the pump and to broaden the range of conditions each model can be used in. All nonmetallic internal parts are PVDF*, a high-grade engineering plastic with higher strength at elevated temperatures and extremely broad chemical resistance, including acidic and oxidizing cleaning ...
-
Distributed by Geoquip Water Solutionsbased in UNITED KINGDOM
The ideal solution for critical service, non-compliant and limited access wells. Top-head-drive piston pumps are heavy duty pumps sited above the wellhead. The pumps provide continuous operation and can pump any liquid, in any environment, at any depth and at any angle, providing the ideal solution for critical service, non-compliant and limited access wells. Easy to service and repair, the pumps ...
-
Manufactured by Ground Effects Environmental Services Inc. (GEE)based in CANADA
The ESC is the only process in the world that can remove colloidal solids consistently from Synthetic and Oil-Based Mud (OBM). Ideal for offshore or onshore solids control on the rig, we get the ultrafines that centrifuges can't. With the ESC system you can program the desired density output to your exact customer density specifications. The result is exactly what you require, with low ...
-
Manufactured by Atmos Technologiesbased in USA
AtmosTac is a high-performance and environmentally safe dust and erosion control product. When applied to the surface or mixed in with any soil or other aggregate, it will penetrate the material to create a tough layer of ...
-
Manufactured by QED Environmental Systems, Incbased in USA
Retriever is a solar-powered, wireless data collection solution for landfill, remediation, and other sites. The Retriever is not just hardware, but an entire data delivery and reporting system that delivers dependable reporting of well level and pump flow data, clearly charted and displayed, and securely archived. ...
-
Manufactured by Cornelsen Umwelttechnologie GmbHbased in GERMANY
Cornelsen has supplied, installed and operated over 30 different systems over the last 2 or 3 years using the Durham Geo MVP total fluids pumps (now replaced by the excellent SRX Remediation and Landfill ...
-
Manufactured by Probe Industries Limitedbased in UNITED KINGDOM
The ProFog fogging system is custom designed to provide a solution to odour and dust problems in large open areas or inside large ...
-
Manufactured by OMI Industries (OMI)based in USA
Our spray gel does more than cover industrial odors—it offers complete odor control. A special spray gel formulation of Ecosorb odor eliminator topically encapsulates material, blocking odors from escaping into the atmosphere. Ecosorb Spray Gel is an ideal solution for sludge handling and transportation, open-bed waste trucks, working faces of landfills, soil remediation projects, and other ...
Need help finding the right suppliers? Try XPRT Sourcing. Let the XPRTs do the work for you